Fiscal year 1973 scientific and technical reports, articles, papers, and presentations

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY73 are presented. Papers of MSFC contractors are also included

SiGeC/Si superlattice microcoolers

Monolithically integrated active cooling is an attractive way for thermal management and temperature stabilization of microelectronic and optoelectronic devices. SiGeC can be lattice matched to Si and is a promising material for integrated coolers. SiGeC/Si superlattice structures were grown on Si substrates by molecular beam epitaxy. Thermal conductivity was measured by the 3omega method. SiGeC/Si superlattice microcoolers with dimensions as small as 40×40 µm^2 were fabricated and characterized. Cooling by as much as 2.8 and 6.9 K was measured at 25 °C and 100 °C, respectively, corresponding to maximum spot cooling power densities on the order of 1000 W/cm^2

Nature-inspired optimization of hierarchical porous media for catalytic and separation processes

Hierarchical materials combining pore sizes of different length scales are highly important for catalysis and separation processes, where optimization of adsorption and transport properties is required. Nature can be an excellent guide to rational design, as it is full of hierarchical structures that are intrinsically scaling, efficient and robust. However, much of the “inspiration” from nature is, at present, empirical; considering the huge design space, we advocate a methodical, fundamental approach based on mechanistic features

Electron-Beam-Induced Grafting of Chitosan onto HDPE/ATZ Composites for Biomedical Applications

The surface functionalisation of high-density polyethylene (HDPE) and HDPE/alumina-toughened zirconia (ATZ) surfaces with chitosan via electron-beam (EB) irradiation technique was exploited for preparing materials suitable for biomedical purposes. ATR–FTIR analysis and wettability measurements were employed for monitoring the surface changes after both irradiation and chitosan grafting reaction. Interestingly, the presence of ATZ loadings beyond 2 wt% influenced both the EB irradiation process and the chitosan functionalisation reaction, decreasing the oxidation of the surface and the chitosan grafting. The EB irradiation induced an increase in Young’s modulus and a decrease in the elongation at the break of all analysed systems, whereas the tensile strength was not affected in a relevant way. Biological assays indicated that electrostatic interactions between the negative charges of the surface of cell membranes and the –NH3+ sites on chitosan chains promoted cell adhesion, while some oxidised species produced during the irradiation process are thought to cause a detrimental effect on the cell viability

Fabrication of nanostructured pearlite steel wires using electropulsing

This work reports the refinement of pearlite structure into nanostructure using electropulsing. Nanostructured pearlitic steel wires possess nanoscale lamellae or nanoscale grain microstructures. Fabrication of nanostructures by severe plastic deformation and lamellar to grain transformation have been investigated. It is suggested that an aligned pearlite structure is preferred in severe plastic deformation. The lamellar to grain transformation is controlled by diffusion of carbon within cementite and also from cementite to ferrite phases. Carbon mobility is changed by mechanical, thermal and electrical states. The interface between nanoscale sub-grains in the ferrite phase has considerable carbon content. Numerical calculations and experimental observations demonstrated these mechanisms

Thermodynamics predicts how confinement modifies hard-sphere dynamics

We study how confining the equilibrium hard-sphere fluid to restrictive one- and two-dimensional channels with smooth interacting walls modifies its structure, dynamics, and entropy using molecular dynamics and transition-matrix Monte Carlo simulations. Although confinement strongly affects local structuring, the relationships between self-diffusivity, excess entropy, and average fluid density are, to an excellent approximation, independent of channel width or particle-wall interactions. Thus, thermodynamics can be used to predict how confinement impacts dynamics.Comment: 4 pages, 4 figure

Effect of Moisture Condition on Concrete Core Strengths

The main purpose of this study was to determine if there would be any major differences between curing methods of cores taken for acceptance testing from a highway slab on a project. The comparison provided data to determine the effect of the moisture gradients created by these different curing treatments on core strength and core permeability. The strengths were measured of moist cured cores and sealed plastic bag cured cores from the day cores were obtained (14, 21 and 26 days) until they reached 28 days. Permeability was also measured at 26, 28 and 32 days. According to ASTM C42, it is current practice to allow the cores to remain in a sealed condition with a plastic bag or non-absorbent containers for at least 5 days prior to testing unless otherwise specified by the engineer. Currently, Nebraska Department of Transportation (NDOT) follows the ASTM C42 with the exception that all cores obtained for compressive strength testing must be delivered to the PCC Lab in a sealed bag, un-bagged and stored immediately in a moist cure room until the required 28-day testing. The findings from this study show no significant difference in strength nor in permeability between curing concrete core samples in bags versus storing them in a moist room

Development of a Cone Penetrometer for Measuring Spectral Characteristics of Soils in Situ

A patent was recently granted to the U.S. Army for an adaptation of a soil cone penetrometer that can be used to measure the spectral characteristics (fluorescence or reflectance) of soils adjacent to the penetrometer rod. The system can use a variety of light sources and spectral analytical equipment. A laser induced fluorescence measuring system has proven to be of immediate use in mapping the distribution of oil contaminated soil at waste disposal and oil storage areas. The fiber optic adaptation coupled with a cone penetrometer permits optical characteristics of the in-situ soil to be measured rapidly, safely, and inexpensively. The fiber optic cone penetrometer can be used to gather spectral data to a depth of approximately 25 to 30 m even in dense sands or stiff clays and can investigate 300 m of soil per day. Typical detection limits for oil contamination in sand is on the order of several hundred parts per million