Robots and tools for remodeling bone

The field of robotic surgery has progressed from small teams of researchers repurposing industrial robots, to a competitive and highly innovative subsection of the medical device industry. Surgical robots allow surgeons to perform tasks with greater ease, accuracy, or safety, and fall under one of four levels of autonomy; active, semi-active, passive, and remote manipulator. The increased accuracy afforded by surgical robots has allowed for cementless hip arthroplasty, improved postoperative alignment following knee arthroplasty, and reduced duration of intraoperative fluoroscopy among other benefits. Cutting of bone has historically used tools such as hand saws and drills, with other elaborate cutting tools now used routinely to remodel bone. Improvements in cutting accuracy and additional options for safety and monitoring during surgery give robotic surgeries some advantages over conventional techniques. This article aims to provide an overview of current robots and tools with a common target tissue of bone, proposes a new process for defining the level of autonomy for a surgical robot, and examines future directions in robotic surgery

Augmented Reality Ultrasound Guidance in Anesthesiology

Real-time ultrasound has become a mainstay in many image-guided interventions and increasingly popular in several percutaneous procedures in anesthesiology. One of the main constraints of ultrasound-guided needle interventions is identifying and distinguishing the needle tip from needle shaft in the image. Augmented reality (AR) environments have been employed to address challenges surrounding surgical tool visualization, navigation, and positioning in many image-guided interventions. The motivation behind this work was to explore the feasibility and utility of such visualization techniques in anesthesiology to address some of the specific limitations of ultrasound-guided needle interventions. This thesis brings together the goals, guidelines, and best development practices of functional AR ultrasound image guidance (AR-UIG) systems, examines the general structure of such systems suitable for applications in anesthesiology, and provides a series of recommendations for their development. The main components of such systems, including ultrasound calibration and system interface design, as well as applications of AR-UIG systems for quantitative skill assessment, were also examined in this thesis. The effects of ultrasound image reconstruction techniques, as well as phantom material and geometry on ultrasound calibration, were investigated. Ultrasound calibration error was reduced by 10% with synthetic transmit aperture imaging compared with B-mode ultrasound. Phantom properties were shown to have a significant effect on calibration error, which is a variable based on ultrasound beamforming techniques. This finding has the potential to alter how calibration phantoms are designed cognizant of the ultrasound imaging technique. Performance of an AR-UIG guidance system tailored to central line insertions was evaluated in novice and expert user studies. While the system outperformed ultrasound-only guidance with novice users, it did not significantly affect the performance of experienced operators. Although the extensive experience of the users with ultrasound may have affected the results, certain aspects of the AR-UIG system contributed to the lackluster outcomes, which were analyzed via a thorough critique of the design decisions. The application of an AR-UIG system in quantitative skill assessment was investigated, and the first quantitative analysis of needle tip localization error in ultrasound in a simulated central line procedure, performed by experienced operators, is presented. Most participants did not closely follow the needle tip in ultrasound, resulting in 42% unsuccessful needle placements and a 33% complication rate. Compared to successful trials, unsuccessful procedures featured a significantly greater (p=0.04) needle-tip to image-plane distance. Professional experience with ultrasound does not necessarily lead to expert level performance. Along with deliberate practice, quantitative skill assessment may reinforce clinical best practices in ultrasound-guided needle insertions. Based on the development guidelines, an AR-UIG system was developed to address the challenges in ultrasound-guided epidural injections. For improved needle positioning, this system integrated A-mode ultrasound signal obtained from a transducer housed at the tip of the needle. Improved needle navigation was achieved via enhanced visualization of the needle in an AR environment, in which B-mode and A-mode ultrasound data were incorporated. The technical feasibility of the AR-UIG system was evaluated in a preliminary user study. The results suggested that the AR-UIG system has the potential to outperform ultrasound-only guidance

Patient-Specific Implants in Musculoskeletal (Orthopedic) Surgery

Most of the treatments in medicine are patient specific, aren’t they? So why should we bother with individualizing implants if we adapt our therapy to patients anyway? Looking at the neighboring field of oncologic treatment, you would not question the fact that individualization of tumor therapy with personalized antibodies has led to the thriving of this field in terms of success in patient survival and positive responses to alternatives for conventional treatments. Regarding the latest cutting-edge developments in orthopedic surgery and biotechnology, including new imaging techniques and 3D-printing of bone substitutes as well as implants, we do have an armamentarium available to stimulate the race for innovation in medicine. This Special Issue of Journal of Personalized Medicine will gather all relevant new and developed techniques already in clinical practice. Examples include the developments in revision arthroplasty and tumor (pelvic replacement) surgery to recreate individual defects, individualized implants for primary arthroplasty to establish physiological joint kinematics, and personalized implants in fracture treatment, to name but a few

Advanced Applications of Rapid Prototyping Technology in Modern Engineering

Rapid prototyping (RP) technology has been widely known and appreciated due to its flexible and customized manufacturing capabilities. The widely studied RP techniques include stereolithography apparatus (SLA), selective laser sintering (SLS), three-dimensional printing (3DP), fused deposition modeling (FDM), 3D plotting, solid ground curing (SGC), multiphase jet solidification (MJS), laminated object manufacturing (LOM). Different techniques are associated with different materials and/or processing principles and thus are devoted to specific applications. RP technology has no longer been only for prototype building rather has been extended for real industrial manufacturing solutions. Today, the RP technology has contributed to almost all engineering areas that include mechanical, materials, industrial, aerospace, electrical and most recently biomedical engineering. This book aims to present the advanced development of RP technologies in various engineering areas as the solutions to the real world engineering problems

Registro automático de imágenes médicas preoperatorias e intraoperatorias basado en intensidad : Aplicación a un sistema de navegación quirúrgica

Las cirugías guiadas por imágenes médicas han cobrado gran importancia en las ultima décadas y con ella los métodos de registro de imágenes, pues con esto se mejora la planeación, intervención y posterior análisis de ciertas cirugías que requieren una especial precisión como es el caso de las neurocirugas. Registrar un par o varias imágenes consiste en alinearlas de tal manera que una de las imágenes quede orientada de la misma forma de otra imagen que se toma de referencia, con esto se puede combinar la información de ambas en un mismo espacio y en una misma representación visual. El poder registrar las imágenes extra da antes de la cirugías (preoperatorias) con las imágenes hechas durante la cirugía (intraoperatorias) es de vital importancia para el especialista, pues puede observar los cambios que se realizan durante la cirugía y as actualizar la información anatómica y estructural, como por ejemplo la ubicación de un tumor el cual al realizar la cirugía cambia un poco en su posición o se deforma. El objetivo primordial de esta tesis fue encontrar unas técnicas iniciales adecuadas que permitieron el registro automático de imágenes médicas provenientes de varias técnicas de creación imágenes y así se creó una librería computacional (prototipo) que pueda servir de base para crear un módulo de registro en un sistema de neuronavegación. Para cumplir con dicho fín se ha optado por usar tecnologías de similitud de imágenes basadas en intensidad como base principal para la realización del registro

Hip deformities and femoroacetabular impingement

RESUMO: Conceptualmente, a conservação de uma estrutura anatómica é mais benéfica do que a sua substituição. No caso das articulações humanas, este conceito é particularmente importante face aos múltiplos problemas, ainda não resolvidos, relacionados com próteses e materiais usados na cirurgia ortopédica. Na articulação coxofemoral, o conceito de preservação, melhorando os parâmetros biomecânicos, assume uma complexidade técnica acrescida maioritariamente pelo facto de a circulação epifisária do fémur ser intra-articular e dada a proximidade de importantes estruturas neurovasculares. O conflito femoroacetabular (CFA) e a displasia acetabular no adulto jovem, são duas entidades patológicas comuns embora com múltiplas áreas ainda por investigar. A displasia infantil, não diagnosticada e não tratada, pode originar displasia acetabular residual na idade adulta e consequente sintomatologia e limitação funcional. O diagnóstico de CFA no adulto é baseado em critérios clínicos e radiográficos. Clinicamente apresenta-se igualmente com dor e limitação funcional. Radiologicamente, dois subtipos de CFA são habitualmente reconhecidos, o tipo Cam (mecanismo patológico decorrente de asfericidade femoral) e o tipo Pincer (por hipercobertura acetabular). Embora com padrões diferentes de envolvimento articular, os dois mecanismos de conflito condicionam dor, lesão estrutural do labrum e condropatia. Atualmente, a morfologia Cam é considerada como um dos principais fatores de risco morfológico que contribuem para o desenvolvimento de osteoartrose precoce da coxofemoral, eventualmente com necessidade de recurso a prótese total da anca. Apesar de a investigação inicial na área da cirurgia conservadora da anca ter documentado bons resultados cirúrgicos, atualmente a controvérsia é francamente superior ao consenso relativamente à melhor abordagem diagnóstica e terapêutica. Caracteristicamente, apesar de em muitos casos os achados clínicos e radiológicos serem inequívocos para o diagnóstico de CFA, um número substancial de doentes apresenta achados frustes ou equívocos. Por outro lado, múltiplos estudos descreveram uma alta prevalência de morfologia compatível com CFA na população adulta e em indivíduos saudáveis assintomáticos. Atualmente, não existe uma ferramenta de imagem ideal que facilite a alocação fidedigna de todos os doentes a um grupo patológico específico ou, por outro lado, exclua com confiança o diagnóstico de conflito. No entanto, os parâmetros de imagem podem ser utilizados para analisar e descrever as diferentes características morfológicas da anca e adicionalmente confirmar o diagnóstico de CFA. Esta tese enfoca, por um lado, a avaliação da morfologia coxofemoral em diferentes populações, investigando quais articulações estão mais predispostas ao desenvolvimento de sintomas e, por outro, os resultados do tratamento cirúrgico de uma coorte com o diagnóstico de CFA tipo Cam. Especificamente, a investigação efetuada: 1) examinou características morfológicas específicas da coxofemoral em diferentes populações (sintomáticas ou não sintomáticas); 2) desenhou um modelo estatístico baseado em preditores anatómicos no sentido de estabelecer as articulações em risco de desenvolvimento sintomático, incorporando geometrias articulares específicas e parâmetros espinhopélvicos; e 3) analisou os resultados de terapêutica cirúrgica numa coorte de doentes com o diagnóstico CFA tipo Cam. Durante a progressão clínica na área da imagiologia e nesta área patológica em particular, apercebemo-nos da existência de múltiplas lacunas de conhecimento que procurámos colmatar com a investigação agora publicada e descrita nesta tese. A sistematização por capítulos reflete precisamente a necessidade de abordar a questão em áreas de conhecimento, simultaneamente distintas e complementares. Os seis capítulos desta tese abrangem o espectro clínico desde o diagnóstico até ao tratamento da anca jovem. De modo a apresentar os objetivos desta tese numa sequência lógica, desde a anatomia geral até à morfologia e tratamento específicos do CFA, a análise da anca assintomática será descrita em primeiro lugar seguida pela análise da relação anatomoclínica entre morfologia articular e sintomas. Por último será abordada a terapêutica do doente sintomático. Na PARTE I, apresentamos os tópicos essenciais para compreender a abrangência do espectro da presente tese, designadamente a relevância e a contemporaneidade do tema “CFA” e adicionalmente o enquadramento anatómico, morfológico e vascular desta articulação. O Capítulo 1 é dedicado ao desenvolvimento e morfogénese da anca. No Capítulo 2, sublinhamos a importância e o papel da imagem através de uma revisão enfocada nas perspetivas atuais e futuras sobre este tópico (Artigo I). No Capítulo 3, realizamos uma revisão sistemática da literatura no sentido de descrever o estado da arte com foco na prevalência da morfologia de CFA em populações assintomáticas e sintomáticas. Este capítulo destaca as múltiplas lacunas de conhecimento relativas ao papel da morfologia da articulação coxofemoral na patogénese do CFA (Artigo II). Com base nesta parte introdutória, abordamos seguidamente os objetivos da presente tese, gerais e específicos, na PARTE II.Na PARTE III, descrevemos o corpo da investigação clínica original efetuada. O Capítulo 4 é dedicado à caracterização detalhada da morfologia da anca, designadamente óssea e vascular. A morfologia coxofemoral foi quantificada utilizando software com capacidade de semi-automatização analítica, permitindo estudar a prevalência e relação entre as diferentes morfologias articulares e o género, dominância e simetria articular (Artigo III). A morfologia Cam foi ainda alvo de caracterização mais aprofundada, através do desenvolvimento de um novo parâmetro quantitativo com potencialidade diagnóstica e de planeamento cirúrgico/ /prognóstico, primariamente testado numa coorte assintomática (Artigo IV) e seguidamente também em doentes com indicação cirúrgica (Artigo V). Na nossa atividade clínica diária apreciámos a necessidade urgente de melhor caracterizar a topografia da deformidade Cam e a respetiva relação com as artérias nutritivas da epífise femoral. A impressão clínica referida sugeria que a morfologia Cam frequentemente se estendia posteriormente ao quadrante póstero-superior, intersectando a região retinacular vascular. No entanto, por imagem a natureza arterial destas estruturas nunca havia sido confirmada. Por esta razão, a importância do parâmetro mencionado foi sublinhada e comprovada no estudo cadavérico com avaliação topográfica vascular do fémur proximal (Artigo VI). No Capítulo 5 testámos múltiplos parâmetros imagiológicos e respetivas variações/relações com diferentes morfologias coxofemorais, no sentido de identificar as articulações com risco clínico aumentado de desenvolvimento sintomático. Para este fim efetuámos estudos baseados em computação avançada com modelação estatística (Artigo VII) e também em ressonância magnética (RM) tridimensional (Artigo VIII). O Capítulo 6 descreve as opções de tratamento (Artigo IX) e os resultados clínicos num estudo clínico de uma coorte com follow-up mínimo de 2 anos, comparando a abordagem cirúrgica aberta e artroscópica (Artigo X). Os resultados dos diferentes capítulos estão sumarizados na PARTE IV, onde apresentamos a síntese geral, a discussão crítica dos resultados obtidos à luz da literatura atual e finalmente as conclusões relevantes. As oportunidades futuras de investigação são igualmente abordadas neste capítulo. Em resumo o trabalho constante da presente tese sugere: Primeiro, que a avaliação imagiológica detalhada da morfologia coxofemoral é essencial no sentido de compreender aprofundadamente não só a própria articulação como também a morfologia pélvica (Artigo I). Segundo, paradoxalmente, a definição clínica de um caso patológico e das diferentes entidades relacionadas, é ainda inexistente. Os parâmetros quantitativos e qualitativos que comummente estão associados com CFA tipo Pincer e Cam são francamente frequentes em diferentes populações (sintomáticas e assintomáticas) (Artigo II).Terceiro, em populações assintomáticas adultas, os intervalos de referência específicos para os parâmetros quantitativos associados a morfologia de CFA e displasia são mais latos e com limites superiores mais elevados do que os atualmente utilizados na prática clínica (Artigo III). A morfologia femoral bem como os epicentros/magnitudes das deformidades Cam são específicos de género, observando-se maiores valores de ângulo alfa e ómega em indivíduos do sexo masculino (Artigo IV). Quarto, é frequente a interseção entre a extensão póstero-superior da deformidade Cam e a convergência epifisária das estruturas vasculares retinaculares observadas em RM, aspetos que se revestem de primordial importância no planeamento cirúrgico. Adicionalmente a extensão radial da deformidade Cam (ângulo ómega) está significativamente mais relacionada com a sintomatologia clínica pré-cirúrgica do que o parâmetro mais comummente utilizado na prática clínica (ângulo alfa) (Artigo V). A origem das estruturas vasculares observadas por RM na prega retinacular é inequivocamente arterial, sendo que abrange uma extensão mais anterior do que classicamente assumido (Artigo VI). Quinto, as geometrias ovalares (em detrimento das morfologias esféricas e elipsoides) são melhor representativas de ambas as superfícies articulares da coxofemoral, designadamente do fémur e acetábulo, bem como das ancas sintomáticas que clinicamente exibem sinais de CFA (Pincer, Cam e misto) (Artigo VII). Indivíduos com maiores deformidades Cam, aspetos de hipocobertura acetabular e acentuação da anteflexão pélvica apresentam uma maior probabilidade de desenvolverem sintomas articulares (Artigo VIII). Esta observação é crítica, dado que fornece, na prática clínica, informação essencial acerca da potencial predisposição para fenómenos de exacerbação sintomática futura, permitindo desta forma instituição de medidas terapêuticas/preventivas adequadas. Na perspetiva do doente, um diagnóstico precoce e preciso, pode conceptualmente prevenir, numa primeira fase, alterações condropáticas articulares e, numa segunda instância, progressão para artrose estabelecida. Sexto, documentamos resultados clínicos e funcionais significativamente favoráveis quando comparamos a abordagem artroscópica e aberta no tratamento cirúrgico da deformidade Cam, sendo de observar que o género feminino está associado a menor score funcional na avaliação pré-operatória (Artigos IX e X). Futuramente, a imagiologia e a cirurgia conservadora da anca irão desenvolver-se conjuntamente e em paralelo com novos e maiores desafios. A descrição de novos parâmetros analíticos para avaliação da patoanatomia coxofemoral, associada à inovação tecnológica crescente e à implementação da inteligência artificial, impõem uma evolução clínica oposta à assunção de classificações patológicas demasiadamente simplistas. Nesse sentido a existência de guidelines de diagnóstico e terapêutica mais efetivas e baseadas na evidência, que nos levem além da pura diferenciação entre CFA e displasia, são urgentes. A história natural das deformidades Cam e Pincer, sintomáticas ou assintomáticas, é ainda grandemente desconhecida, assumindo-se como uma área determinante de investigação no que concerne ao diagnóstico, terapêutica e prognóstico.ABSTRACT: Conceptually, the preservation of a human anatomical structure makes more sense than its replacement. This concept is even more striking in the case of human joints due to the multitude of unsolved problems related to implants used in orthopaedic surgery. With respect to the hip, joint preservation assumes an increased technical complexity when compared to other joints; this is due to two main reasons: the intra-articular epiphyseal circulation of the femur and the proximity of large neurovascular structures. Femoroacetabular impingement (FAI) and acetabular dysplasia (DHD) in young adults are two common but poorly characterised pathological entities. If undiagnosed and untreated, dysplasia in childhood may lead to residual DHD in young adults, as diagnosed on radiographs, and may also give rise to symptoms such as hip pain and restricted range of motion. The diagnosis of FAI in adults is based on clinical and imaging criteria. The most frequently noticed symptoms of FAI include hip pain and restricted function. Radiologically, two main subtypes of FAI are recognised: The Cam-type, with the pathoanatomical mechanism located on the femoral side, and the Pincertype on the acetabular side. Although with different pathological patterns, both types cause pain and articular damage of the labrum and cartilage. While Cam-type FAI is believed to be a major contributing factor to the early onset of hip osteoarthritis (OA), which eventually requires a total hip replacement, the relationship of other shapes and morphologies with OA are still under debate. Despite the initial promising reports on outcomes following surgical management of these conditions, the best approach to diagnose and manage them still remains controversial. Although for some patients there are unambiguous clinical and imaging findings of FAI, for a substantial number of patients there are minimal or intermediate findings. Moreover, several studies have reported a high prevalence of FAI morphology among the “normal” population and in asymptomatic healthy individuals. At present, there is no adequate imaging tool to facilitate the reliable allocation of all patients into the correct diagnostic group or to confidently rule out diagnosis. However, imaging parameters can be used to describe different hip morphological characteristics and additionally confirm or preclude the diagnosis of FAI.This thesis focuses on assessing hip morphology in different populations by investigating which specific joints are more prone to developing symptoms and by evaluating treatment outcomes of a FAI cohort. Specifically, this research concentrates on the following: 1) examining population-specific (symptomatic and non-symptomatic) characteristics of hip morphology; 2) developing an anatomic-based model to establish “at-risk” hip joints, incorporating subject-specific hip geometries and spinopelvic parameters and 3) investigating treatment outcomes in a Cam-type FAI cohort. In our clinical progression in imaging and in this particular area of pathology, we became aware of the existence of several gaps that we sought to fill with the now published research hereby described. The systematisation by chapters precisely reflects the need to address the issue in simultaneously distinct and complementary areas of knowledge. This thesis consists of six chapters, which cover the entire spectrum from the diagnosis to treatment of the young hip. To present the aims of this thesis in a sequential manner from general morphology to more specific FAI-related topics, the analysis of the asymptomatic hip will be presented first, followed by how joint morphology is associated with symptoms and, finally, will conclude with treatment. In PART I, we introduce the topics that are relevant to understand the full scope of our thesis; we aim to accomplish this by addressing the relevance and contemporariness of the “FAI” theme and by describing the general and vascular anatomy of the hip. Chapter 1 is devoted to hip development and morphogenesis. In Chapter 2, we address the importance of imaging by conducting a thorough review of current and future perspectives on this topic (Paper I). In Chapter 3, we perform a systematic review of the literature to write a state-of-the-art overview, focussing on asymptomatic and symptomatic FAI morphology prevalence and highlighting the multiple gaps in knowledge regarding the role of hip morphology in the pathogenesis of FAI (Paper II). Building on the first part, we address the rationale and aims of this thesis in PART II. In PART III, we describe the original research that was performed and published. Chapter 4 focusses on the detailed characterisation of hip morphology, both osseous and vascular. Bony hip morphology was quantified using a semi-automated software, which allows to robustly study in detail shape variants in an asymptomatic population and their relationship with sex, side and limb dominance (Paper III). Cam morphology was further defined by developing a novel quantitative parameter, with diagnostic and treatment planning capabilities using a cohort of both asymptomatic individuals (Paper IV) and patients undergoing surgery (Paper V). Moreover, we felt the need to better characterise the topography of the deformity and its relationship with the nourishing arteries of the femoral head, as Cam morphology frequently has a posterior a bstr extension that overlaps the retinacular vascular structures. However, its arterial origin has never been described or confirmed in the literature. For this reason, the importance of the aforementioned parameter has been outlined by the cadaveric arterial topographic study of the proximal femur (Paper VI). In Chapter 5, we test multiple parameters and their associated shape variants to detect which ones allow identifying a risk-increased joint in various populations. To this end, we use both advanced computing for shape modelling (Paper VII) and three dimensional (3D) magnetic resonance imaging (MRI) (Paper VIII). Chapter 6 describes the various treatment options (Paper IX) and outcomes in a cohort clinical study, comparing open surgery with arthroscopic surgery in terms of treating Cam deformities (Paper X). The results of the aforementioned chapters are summarised in PART IV, presenting the general synthesis, discussing the results in the light of current literature and detailing the conclusions of this thesis. The scope of potential future research within this field is also presented in this chapter. In brief, this thesis suggests the following: First, detailed imaging assessment of hip morphology is paramount to better understanding both the hip joint and pelvic morphology (Paper I). Second, the case definitions of different morphologies and clinical entities are missing as far as FAI and related disorders are concerned. Qualitative and quantitative radiographic findings thought to be associated with Cam- and Pincer-type FAI, as well as the coexistence between them, are quite common among different populations (Paper II). Third, in adult asymptomatic populations, sex-specific reference intervals for hip measurements for DHD and FAI morphology are wider than currently accepted values (Paper III). Moreover, femoral morphology with distinct Cam magnitudes and epicentres is also sex-specific, with higher mean alpha angle (α°) and omega angle (Ω°) values seen in males (Paper IV). Forth, Cam deformity frequently overlaps with the retinacular vascular structures seen in an MRI; this finding has practical surgical relevance. Additionally, the radial extension of the Cam deformity (Ω°) is more significantly associated with the patients’ symptoms prior to surgery than the α° (paper V). The origin of the vascular structures seen in the retinacular fold is unequivocally arterial in nature, and these structures have a more anterior distribution than classically assumed (Paper VI). Fifth, ovoid geometries are more representative of both articular surfaces of the hip joint as well as of Cam, Pincer and mixed impinged hips when compared to spherical or ellipsoidal shapes (Paper VII). Individuals with larger Cam deformities, decreased acetabular coverage and increased pelvic anteflexion are more likely to experience hip symptoms (Paper VIII). This provides clinicians with indications of how the pathology exacerbates, allowing them to perform the correct clinical assessments and proceed with the correct form of care. From a patient’s perspective, an early and accurate diagnosis could prevent cartilage degradation and progression to OA. Sixth, similar outcomes and significant functional improvement are observed when comparing open and arthroscopic surgery in the treatment of Cam deformities (follow-up time of two years). It should be noted that the female gender was associated with poor hip function in the preoperative evaluation (papers IX and X). Looking ahead, imaging and hip preserving surgery (HPS) will evolve hand-in-hand in the face of new and greater challenges. The increasing number of analytic parameters describing hip joint pathomorphologies as well as new sophisticated 3D imaging-analysis together with emerging artificial intelligence-based technologies have transported us beyond simple classification systems. Moreover, more reliable diagnostic and treatment guidelines that go beyond differentiation into pure FAI and dysplasia are paramount. The largely unknown natural course of both hips with symptomatic FAI and asymptomatic individuals continues to present research opportunities as far as diagnosis, treatment and prognosis are concerned

PRELIMINARY FINDINGS OF A POTENZIATED PIEZOSURGERGICAL DEVICE AT THE RABBIT SKULL

The number of available ultrasonic osteotomes has remarkably increased. In vitro and in vivo studies have revealed differences between conventional osteotomes, such as rotating or sawing devices, and ultrasound-supported osteotomes (Piezosurgery®) regarding the micromorphology and roughness values of osteotomized bone surfaces. Objective: the present study compares the micro-morphologies and roughness values of osteotomized bone surfaces after the application of rotating and sawing devices, Piezosurgery Medical® and Piezosurgery Medical New Generation Powerful Handpiece. Methods: Fresh, standard-sized bony samples were taken from a rabbit skull using the following osteotomes: rotating and sawing devices, Piezosurgery Medical® and a Piezosurgery Medical New Generation Powerful Handpiece. The required duration of time for each osteotomy was recorded. Micromorphologies and roughness values to characterize the bone surfaces following the different osteotomy methods were described. The prepared surfaces were examined via light microscopy, environmental surface electron microscopy (ESEM), transmission electron microscopy (TEM), confocal laser scanning microscopy (CLSM) and atomic force microscopy. The selective cutting of mineralized tissues while preserving adjacent soft tissue (dura mater and nervous tissue) was studied. Bone necrosis of the osteotomy sites and the vitality of the osteocytes near the sectional plane were investigated, as well as the proportion of apoptosis or cell degeneration. Results and Conclusions: The potential positive effects on bone healing and reossification associated with different devices were evaluated and the comparative analysis among the different devices used was performed, in order to determine the best osteotomes to be employed during cranio-facial surgery