30,078 research outputs found
Reconfigurable DPD based on ANNs for wideband load modulated balanced amplifiers under dynamic operation from 1.8 to 2.4 GHz
This article proposes a methodology to ensure linear amplification of a load modulated balanced amplifier (LMBA) while keeping the power efficiency as high as possible over a frequency band ranging from 1.8 to 2.4 GHz and where the transmitted signals can present different bandwidth (BW) configurations. The proposed reconfigurable linearization methodology consists of, in a first step, tuning some free parameters (with dependence on the signal BW and frequency of operation) of the LMBA to trade-off linearity and power efficiency. In a second step, two multipurpose adaptive digital predistortion (DPD) linearizers are considered, properly combined with crest factor reduction (CFR) techniques, to meet the required linearity specifications. Either a DPD based on artificial neural networks or a DPD based on polynomials can be selected taking into account the compromise between computational complexity and linearization performance. Experimental results will validate the proposed methodology to guarantee the linearity levels (ACPR < -45 dBc and EVM < 1%) with high power efficiency in an LMBA under dynamic transmission, where both the signal BW (from 20 and up to 200-MHz instantaneous BW) and frequency of operation (in the range of 1.8-2.4 GHz) change.This work was supported in part by the Spanish Government (Ministerio de Ciencia, Innovación y Universidades) and FEDER (Fondo Europeo de Desarrollo Regional) under Grant TEC2017-83343-C4-2-R and in part by the Generalitat de Catalunya under Grant 2017 SGR 813. This paper is an expanded version from the International Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMiC), Cardiff, United Kingdom, July 2020.Peer ReviewedPostprint (author's final draft
Reconfigurable DPD based on ANNs for wideband load modulated balanced amplifiers under dynamic operation from 1.8 to 2.4 GHz
This article proposes a methodology to ensure linear amplification of a load modulated balanced amplifier (LMBA) while keeping the power efficiency as high as possible over a frequency band ranging from 1.8 to 2.4 GHz and where the transmitted signals can present different bandwidth (BW) configurations. The proposed reconfigurable linearization methodology consists of, in a first step, tuning some free parameters (with dependence on the signal BW and frequency of operation) of the LMBA to trade-off linearity and power efficiency. In a second step, two multipurpose adaptive digital predistortion (DPD) linearizers are considered, properly combined with crest factor reduction (CFR) techniques, to meet the required linearity specifications. Either a DPD based on artificial neural networks or a DPD based on polynomials can be selected taking into account the compromise between computational complexity and linearization performance. Experimental results will validate the proposed methodology to guarantee the linearity levels (ACPR < -45 dBc and EVM < 1%) with high power efficiency in an LMBA under dynamic transmission, where both the signal BW (from 20 and up to 200-MHz instantaneous BW) and frequency of operation (in the range of 1.8-2.4 GHz) change
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
A Fully-Integrated Reconfigurable Dual-Band Transceiver for Short Range Wireless Communications in 180 nm CMOS
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.A fully-integrated reconfigurable dual-band (760-960 MHz and 2.4-2.5 GHz) transceiver (TRX) for short range wireless communications is presented. The TRX consists of two individually-optimized RF front-ends for each band and one shared power-scalable analog baseband. The sub-GHz receiver has achieved the maximum 75 dBc 3rd-order harmonic rejection ratio (HRR3) by inserting a Q-enhanced notch filtering RF amplifier (RFA). In 2.4 GHz band, a single-ended-to-differential RFA with gain/phase imbalance compensation is proposed in the receiver. A ΣΔ fractional-N PLL frequency synthesizer with two switchable Class-C VCOs is employed to provide the LOs. Moreover, the integrated multi-mode PAs achieve the output P1dB (OP1dB) of 16.3 dBm and 14.1 dBm with both 25% PAE for sub-GHz and 2.4 GHz bands, respectively. A power-control loop is proposed to detect the input signal PAPR in real-time and flexibly reconfigure the PA's operation modes to enhance the back-off efficiency. With this proposed technique, the PAE of the sub-GHz PA is improved by x3.24 and x1.41 at 9 dB and 3 dB back-off powers, respectively, and the PAE of the 2.4 GHz PA is improved by x2.17 at 6 dB back-off power. The presented transceiver has achieved comparable or even better performance in terms of noise figure, HRR, OP1dB and power efficiency compared with the state-of-the-art.Peer reviewe
Wideband Self-Adaptive RF Cancellation Circuit for Full-Duplex Radio: Operating Principle and Measurements
This paper presents a novel RF circuit architecture for self-interference
cancellation in inband full-duplex radio transceivers. The developed canceller
is able to provide wideband cancellation with waveform bandwidths in the order
of 100 MHz or beyond and contains also self-adaptive or self-healing features
enabling automatic tracking of time-varying self-interference channel
characteristics. In addition to architecture and operating principle
descriptions, we also provide actual RF measurements at 2.4 GHz ISM band
demonstrating the achievable cancellation levels with different bandwidths and
when operating in different antenna configurations and under low-cost highly
nonlinear power amplifier. In a very challenging example with a 100 MHz
waveform bandwidth, around 41 dB total cancellation is obtained while the
corresponding cancellation figure is close to 60 dB with the more conventional
20 MHz carrier bandwidth. Also, efficient tracking in time-varying reflection
scenarios is demonstrated.Comment: 7 pages, to be presented in 2015 IEEE 81st Vehicular Technology
Conferenc
- …