Selection of network parameters in direct ANN modeling of roughness obtained in FFF processes

Abstract

Artificial neural network (ANN) models have been used in the past to model surface roughness in manufacturing processes. Specifically, different parameters influence surface roughness in fused filament fabrication (FFF) processes. In addition, the characteristics of the networks have a direct impact on the performance of the models. In this work, a study about the use of ANN to model surface roughness in FFF processes is presented. The main objective of the paper is discovering how key ANN parameters (specifically, the number of neurons, the training algorithm, and the percentage of training and validation datasets) affect the accuracy of surface roughness predictions. To address this question, 125 3D printing experiments were conducted changing orientation angle, layer height and printing temperature, and measuring average roughness Ra as response. A multilayer perceptron neural network model with backpropagation algorithm was used. The study evaluates the effect of three ANN parameters: (1) number of neurons in the hidden layer (4, 5, 6 or 7), (2) training algorithm (Levenberg–Marquardt, Resilient Backpropagation or Scaled Conjugate Gradient), and (3) data splitting ratios (70%–15%–15% vs. 55%–15%–30%). Mean Absolute Error (MAE) was used as the performance metric. The Resilient Backpropagation algorithm, 7 neurons, and using 55% of training data yielded the best predictive performance, minimizing the MAE. Additionally, the impact of the dataset size on prediction accuracy was analysed. It was observed that the performance of the ANN gets worse as the number of datasets is reduced, emphasizing the importance of having sufficient data. This study will help to select appropriate values for the printing parameters in FFF processes, as well as to define the characteristics of the ANN to be used to model surface roughness.The authors would like to thank Alejandro Domínguez and Ramón Casado for their help with the experimental tests. They also thank the Catalan Government for the quality accreditation given to the research group TECNOFAB (2021 SGR 01034). TECNOFAB belongs to the group DIGIFACT, which is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.Peer ReviewedPostprint (published version