Skip to main content
Article thumbnail
Location of Repository

Cold hydraulic expansion of oil well tubulars

By Alfred Rotimi Akisanya, Fariq Khan, Wiliam F Deans and Peter Wood


Peer reviewedPostprin

Topics: Expandable tubular, Hydraulic expansion, Thick-walled cylinders, Interference, Residual stresses, TA Engineering (General). Civil engineering (General), TA
Year: 2011
DOI identifier: 10.1016/j.ijpvp.2011.08.003
OAI identifier:

Suggested articles


  1. (1994). An analytical model to predict the burst capacity of pipelines,
  2. (1998). Analytical burst strength prediction of OCTG with and without defects, SPE Paper 48329, doi
  3. (2005). Development of a hydraulically expanded metal internal casing patch. doi
  4. (1999). Expandable tubular solutions, doi
  5. (1999). Expandable wellbore tubular, doi
  6. (2004). Forming mechanism of double-layered tubes by internal hydraulic expansion. doi
  7. (2000). In-situ expansion of casing and tubing – effect on mechanical properties and resistance to sulphide stress cracking,
  8. (1997). Optimum expansion and residual contact pressure levels of hydraulically expanded tube-to-tubesheet joints, Trans. Canadian Society for Mechanical Engineering,
  9. (1993). Residual-stresses associated with the hydraulic expansion of steam-generator tubing into tubesheets, Nuclear Engineering and Design, doi
  10. (1987). Theory of Plasticity, doi
  11. (1998). Thermal contact resistance at the interface of double tubes assembled by plastic deformation. Experimental Thermal and Fluid Science, doi

To submit an update or takedown request for this paper, please submit an Update/Correction/Removal Request.