A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs

Recent government sponsored research has demonstrated that there is a gap between the theory and practice of market intelligence gathering within the Australian micro, small and medium businesses (SMEs). Typically, there is a significant amount of information in literature about 'what needs to be done', however, there is little insight in terms of how market intelligence gathering should occur. This paper provides a novel insight and a comparison between the theory and practices of market intelligence gathering of micro-business and SMEs in Australia and demonstrates an anomoly in so far as typically the literature does not match what actually occurs in practice. A model for market intelligence gathering for micro-businesses and SMEs is also discussed

A comparison of theory and practice in market intelligence gathering for Australian micro-businesses and SMEs

Recent government sponsored research has demonstrated that there is a gap between the theory and practice of market intelligence gathering within the Australian micro, small and medium businesses (SMEs). Typically, there is a significant amount of information in literature about 'what needs to be done', however, there is little insight in terms of how market intelligence gathering should occur. This paper provides a novel insight and a comparison between the theory and practices of market intelligence gathering of micro-business and SMEs in Australia and demonstrates an anomoly in so far as typically the literature does not match what actually occurs in practice. A model for market intelligence gathering for micro-businesses and SMEs is also discussed

Economic impact of antimicrobial resistance.

One reason antimicrobial-drug resistance is of concern is its economic impact on physicians, patients, health-care administrators, pharmaceutical producers, and the public. Measurement of cost and economic impact of programs to minimize antimicrobial-drug resistance is imprecise and incomplete. Studies to describe and evaluate the problem will have to employ new methods and be of large scale to produce information that is broadly applicable

COFS 3 multibody dynamics and control technology

One of the results from the model definition study showed that the maximum scale factor for a replica model is .25. This is dictated by the fixed dimensions of the Large Spacecraft Lab. Replica scaling laws were applied to simplified theoretical models of joints and the joint/tube/joint system. The practical interpretation of the results for the specific Space Station configuration under study yielded a number of conclusions which are briefly discussed. Detailed suspension analyses were conducted to evaluate the ability of the suspended scale model to emulate the dynamic behavior of the free-free Space Station. The results indicated only a slight preference for smaller scales. A candidate erectable Space Station joint was fabricated at full scale, 1/4 scale and 1/3 scale in order to assess the comparability of the scaled joints to the full scale behavior. Another important question discussed is how well the inherent damping characteristics of the scaled joints compare to those of the full scale joint. The preliminary definition study yielded three separate scale factor recommendations for the scale model

Religious Relationships with the Environment in a Tibetan Rural Community : Interactions and Contrasts with Popular Notions of Indigenous Environmentalism

Acknowledgments: We thank Beijing Forestry University, our field assistants Tashi Rabden, Pema Dechin, Tsewang Chomtso and Gele Chopel for their invaluable help, the Forest Bureau of Daocheng county for permission and support, and the people of Samdo for their hospitality and participation. The research was funded by the ESRC and the World Pheasant Association. This paper is a contribution to Imperial College’s Grand Challenges in Ecosystems and the Environment initiative. Two anonymous reviewers gave valuable comments on the manuscript.Peer reviewedPublisher PD

Leading-edge slat optimization for maximum airfoil lift

A numerical procedure for determining the position (horizontal location, vertical location, and deflection) of a leading edge slat that maximizes the lift of multielement airfoils is presented. The structure of the flow field is calculated by iteratively coupling potential flow and boundary layer analysis. This aerodynamic calculation is combined with a constrained function minimization analysis to determine the position of a leading edge slat so that the suction peak on the nose of the main airfoil is minized. The slat position is constrained by the numerical procedure to ensure an attached boundary layer on the upper surface of the slat and to ensure negligible interaction between the slat wake and the boundary layer on the upper surface of the main airfoil. The highest angle attack at which this optimized slat position can maintain attached flow on the main airfoil defines the optimum slat position for maximum lift. The design method is demonstrated for an airfoil equipped with a leading-edge slat and a trailing edge, single-slotted flap. The theoretical results are compared with experimental data, obtained in the Ames 40 by 80 Foot Wind Tunnel, to verify experimentally the predicted slat position for maximum lift. The experimentally optimized slat position is in good agreement with the theoretical prediction, indicating that the theoretical procedure is a feasible design method

Perth\u27s North-West corridor: a bibliography

The Joondalup Campus of the Western Australian College of Advanced Education is now well established and growing rapidly in size. In part this growth has resulted in an increasing demand for literature on the Perth North-West Corridor and increasing attention being directed to research on the environment and culture of the area. This bibliography has been prepared to facilitate research and scholarship both on the campus and beyond and to assist citizens of the Northern Corridor interested in learning more about their region..

Enhancing a Taxonomy for Health Information Technology: An Exploratory Study of User Input Towards Folksonomy

The U.S. Agency for Healthcare Research and Quality has created a public website to disseminate critical information regarding its health information technology initiative. The website is maintained by AHRQ's Natiomal Resource Center (NRC) for Health Information Technology. In the latest continuous quality improvement project, the NRC used the site's search logs to extract user-generated search phrases. The phrases were then compared to the site's controlled vocabulary with respect to language, grammar, and search precision. Results of the comparison demonstrate that search log data can be a cost-effective way to improve controlled vocabularies as well as information retrieval. User-entered search phrases were found to also share many similarities with folksonomy tags

The LATDYN user's manual

The LATDYN User's Manual presents the capabilities and instructions for the LATDYN (Large Angle Transient DYNamics) computer program. The LATDYN program is a tool for analyzing the controlled or uncontrolled dynamic transient behavior of interconnected deformable multi-body systems which can undergo large angular motions of each body relative other bodies. The program accommodates large structural deformation as well as large rigid body rotations and is applicable, but not limited to, the following areas: (1) development of large flexible space structures; (2) slewing of large space structure components; (3) mechanisms with rigid or elastic components; and (4) robotic manipulations of beam members. Presently the program is limited to two dimensional problems, but in many cases, three dimensional problems can be exactly or approximately reduced to two dimensions. The program uses convected finite elements to affect the large angular motions involved in the analysis. General geometry is permitted. Detailed user input and output specifications are provided and discussed with example runstreams. To date, LATDYN has been configured for CDC/NOS and DEC VAX/VMS machines. All coding is in ANSII-77 FORTRAN. Detailed instructions regarding interfaces with particular computer operating systems and file structures are provided

Weak Disorder in Fibonacci Sequences

We study how weak disorder affects the growth of the Fibonacci series. We introduce a family of stochastic sequences that grow by the normal Fibonacci recursion with probability 1-epsilon, but follow a different recursion rule with a small probability epsilon. We focus on the weak disorder limit and obtain the Lyapunov exponent, that characterizes the typical growth of the sequence elements, using perturbation theory. The limiting distribution for the ratio of consecutive sequence elements is obtained as well. A number of variations to the basic Fibonacci recursion including shift, doubling, and copying are considered.Comment: 4 pages, 2 figure