360 research outputs found

    Numerical Integration Through Concavity Analysis

    Get PDF
    We introduce a relationship between the concavity of a C2 func- tion and the area bounded by its graph and secant line. We utilize this relationship to develop a method of numerical integration. We then bound the error of the approximation, and compare to known methods, finding an improvement in error bound over methods of comparable computational complexity

    Independent Orbiter Assessment (IOA): Analysis of the DPS subsystem

    Get PDF
    The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis/Critical Items List (FMEA/CIL) is presented. The IOA approach features a top-down analysis of the hardware to independently determine failure modes, criticality, and potential critical items. The independent analysis results corresponding to the Orbiter Data Processing System (DPS) hardware are documented. The DPS hardware is required for performing critical functions of data acquisition, data manipulation, data display, and data transfer throughout the Orbiter. Specifically, the DPS hardware consists of the following components: Multiplexer/Demultiplexer (MDM); General Purpose Computer (GPC); Multifunction CRT Display System (MCDS); Data Buses and Data Bus Couplers (DBC); Data Bus Isolation Amplifiers (DBIA); Mass Memory Unit (MMU); and Engine Interface Unit (EIU). The IOA analysis process utilized available DPS hardware drawings and schematics for defining hardware assemblies, components, and hardware items. Each level of hardware was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode. Due to the extensive redundancy built into the DPS the number of critical items are few. Those identified resulted from premature operation and erroneous output of the GPCs

    Independent Orbiter Assessment (IOA): Analysis of the guidance, navigation, and control subsystem

    Get PDF
    The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) is presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results corresponding to the Orbiter Guidance, Navigation, and Control (GNC) Subsystem hardware are documented. The function of the GNC hardware is to respond to guidance, navigation, and control software commands to effect vehicle control and to provide sensor and controller data to GNC software. Some of the GNC hardware for which failure modes analysis was performed includes: hand controllers; Rudder Pedal Transducer Assembly (RPTA); Speed Brake Thrust Controller (SBTC); Inertial Measurement Unit (IMU); Star Tracker (ST); Crew Optical Alignment Site (COAS); Air Data Transducer Assembly (ADTA); Rate Gyro Assemblies; Accelerometer Assembly (AA); Aerosurface Servo Amplifier (ASA); and Ascent Thrust Vector Control (ATVC). The IOA analysis process utilized available GNC hardware drawings, workbooks, specifications, schematics, and systems briefs for defining hardware assemblies, components, and circuits. Each hardware item was evaluated and analyzed for possible failure modes and effects. Criticality was assigned based upon the severity of the effect for each failure mode

    A search for soft X-ray emission associated with prominent high-velocity-cloud complexes

    Get PDF
    We correlate the ROSAT 1/4 keV all-sky survey with the Leiden/Dwingeloo HI survey, looking for soft X-ray signatures of prominent high-velocity-cloud (HVC) complexes. We study the transfer of 1/4 keV photons through the interstellar medium in order to distinguish variations in the soft X-ray background (SXRB) intensity caused by photoelectric absorption effects from those due to excess X-ray emission. The X-ray data are modelled as a combination of emission from the Local Hot Bubble (LHB) and emission from a distant plasma in the galactic halo and extragalactic sources. The X-ray radiation intensity of the galactic halo and extragalactic X-ray background is modulated by the photoelectric absorption of the intervening galactic interstellar matter. We show that large- and small-scale intensity variations of the 1/4 keV SXRB are caused by photoelectric absorption which is predominantly traced by the total N(HI) distribution. The extensive coverage of the two surveys supports evidence for a hot, X-ray emitting corona. We show that this leads to a good representation of the SXRB observations. For four large areas on the sky, we search for regions where the modelled and observed X-ray emission differ. We find that there is excess X-ray emission towards regions near HVC complexes C, D, and GCN. We suggest that the excess X-ray emission is positionally correlated with the high-velocity clouds. Some lines of sight towards HVCs also pass through significant amounts of intermediate-velocity gas, so we cannot constrain the possible role played by IVC gas in these directions of HVC and IVC overlap, in determining the X-ray excesses.Comment: 16 pages, 8 figures, accepted for publication in Astronomy & Astrophysics main journa

    Superhumps of CC Cancri Revisited

    Full text link
    We observed the 2001 November superoutburst of CC Cnc. This observation makes the first detailed coverage of a superoutburst of this object. The best-determined mean superhump period is 0.075518 +/- 0.000018 d, which is 2.7% longer than the reported orbital period. This fractional superhump excess is a quite typical value for a normal SU UMa-type dwarf nova, excluding the previously raised possibility that CC Cnc may have an anomalously large fractional superhump excess. During the superoutburst plateau, the object showed a decrease of the superhump period at dot(P)/P = -10.2(1.3) x 10^(-5), which is one of the largest negative period derivative known in all SU UMa-type dwarf novae.Comment: 5 pages, 5 figures, to appear in Publ. Astron. Soc. Japa

    Kilo-Second Quasi-Periodic Oscillations in the Cataclysmic Variable DW Cancri

    Get PDF
    Our photometric monitoring revealed that DW Cnc, which was originally classified as a dwarf nova (V=15--17.5), remained at a bright state of Rc=14.68+/-0.07 for 61 days. In conjunction with optical spectra lacking a strong He II emission line, we propose that the object is not a dwarf nova, but a non-magnetic nova-like variable. Throughout our monitoring, the object showed strong quasi-periodic oscillations (QPOs) with amplitudes reaching about 0.3 mag. Our period analysis yielded a power spectrum with two peaks of QPOs, whose center periods are 37.5+/-0.1 and 73.4+/-0.4 min and, furthermore, with a significant power in frequencies lower than the QPOs. DW Cnc is a unique cataclysmic variable in which kilo-second QPOs were continuously detected for 61 days. We propose two possible interpretations of DW Cnc: (i) A permanent superhumper below the period minimum of hydrogen-rich cataclysmic variables. (ii) A nova-like variable having an orbital period over 3 hours. In this case, the QPOs may be caused by trapped disk oscillations.Comment: 6 pages, 4 figures, PASJ in pres

    Photometric Observations of an SU UMa-type Dwarf Nova VW Coronae Borealis during Outbursts

    Full text link
    We report the photometric observations of an SU UMa-type dwarf nova VW CrB during two superoutbursts in 2001 and 2003 and a normal outburst in 2003. Superhumps with a period of 0.07287(1) d were observed during the 2003 superoutburst. The change rate of the superhump period was positive. During the normal outburst, there are some hint of modulation up to a 0.2-mag amplitude. However, any periodicity was not found. The recurrence cycles of the normal outburst and the superoutburst, and the distance were estimated to be > ~50 d, 270-500 d, and 690(+230, -170) pc, respectively. These recurrence cycles are usual values for an SU UMa-type dwarf nova having this superhump period. The superhump period of VW CrB was the longest among those of the SU UMa stars with positive derivatives of the superhump period. The coverage of our observations was, however, not enough, and the variation of the Psh change rate of VW CrB is still unknown. A superhump regrowth and a brightening were seen near the end of the plateau phase. Measuring the deviation of the start timings of the brightening and the superhump regrowth (>2 days in VW CrB) will be a key to reveal the mechanism of these phenomena.Comment: 7 pages, 8 figures, to appear in PAS

    High Velocity Cloud Complex H: A Satellite of the Milky Way in a Retrograde Orbit?

    Full text link
    Observations with the Green Bank Telescope of 21cm HI emission from the high-velocity cloud Complex H suggest that it is interacting with the Milky Way. A model in which the cloud is a satellite of the Galaxy in an inclined, retrograde circular orbit reproduces both the cloud's average velocity and its velocity gradient with latitude. The model places Complex H at approximately 33 kpc from the Galactic Center on a retrograde orbit inclined about 45 degrees to the Galactic plane. At this location it has an HI mass > 6 10^6 Msun and dimensions of at least 10 by 5 kpc. Some of the diffuse HI associated with the cloud has apparently been decelerated by interaction with Galactic gas. Complex H has similarities to the dwarf irregular galaxy Leo A and to some compact high-velocity clouds, and has an internal structure nearly identical to parts of the Magellanic Stream, with a pressure P/k about 100 cm^{-3} K.Comment: 12 pages includes 4 figures. To be published in Astrophysical Journal Letters, 1 July 200
    • …
    corecore