A spiraled niobium tin superconductive ribbon

Copper film is vapor-deposited on clean ribbon and sprayed with photosensitive etch-resistant material. Photographic film masks are placed on ribbon and exposed to ultraviolet light. Etchant removes copper and exposure to oxidizing atmosphere forms niobium oxide. Photosensitive material is removed and ribbon is immersed in molten temperatures

Twisted multifilament superconductor

Masking selected portions of a ribbon and forming an intermetallic compound on the unmasked portions by a controlled diffusion reaction produces a twisted filamentary structure. The masking material prohibits the formation of superconductive material on predetermined areas of the substrate

Free-surface phenomena under low- and zero-gravity conditions

An apparatus to measure contact angle was constructed to exploit the proposed internal-corner criterion. If 2 alfa is the internal angle between two intersecting vertical planes and gamma is the contact angle, a meniscus at the corner rises to a finite height if alfa + gamma pi/2 and to an infinite height if alfa + gamma pi/2. The apparatus operates by decreasing the angle alfa from pi/2 until the meniscus height changes abruptly. A number of liquids are tested on glass and plexiglas

Topology of the Galaxy Distribution in the Hubble Deep Fields

We have studied topology of the distribution of the high redshift galaxies identified in the Hubble Deep Field (HDF) North and South. The two-dimensional genus is measured from the projected distributions of the HDF galaxies at angular scales from $3.8''$ to $6.1''$. We have also divided the samples into three redshift slices with roughly equal number of galaxies using photometric redshifts to see possible evolutionary effects on the topology. The genus curve of the HDF North clearly indicates clustering of galaxies over the Poisson distribution while the clustering is somewhat weaker in the HDF South. This clustering is mainly due to the nearer galaxies in the samples. We have also found that the genus curve of galaxies in the HDF is consistent with the Gaussian random phase distribution with no significant redshift dependence.Comment: 14 pages, 4 figures, submitted to Ap

Investigation of Icing Characteristics of Typical Light Airplane Engine Induction Systems

The icing characteristics of two typical light-airplane engine induction systems were investigated using the carburetors and manifolds of engines in the horsepower ranges from 65 to 85 and 165 to 185. The smaller system consisted of a float-type carburetor with an unheated manifold and the larger system consisted of a single-barrel pressure-type carburetor with an oil-jacketed manifold. Carburetor-air temperature and humidity limits of visible and serious Icing were determined for various engine power conditions. Several.methods of achieving ice-free induction systems are discussed along with estimates of surface heating requirements of the various induct ion-system components. A study was also made of the icing characteristics of a typical light-airplane air scoop with an exposed filter and a modified system that provided a normal ram inlet with the filter located in a position to Induce inertia separation of the free water from the charge air. The principle of operation of float-type carburetors is proved to make them inherently more susceptible to icing at the throttle plate than pressure-type carburetors.. The results indicated that proper jacketing and heating of all parts exposed to the fuel spray can satisfactorily reduce or eliminate icing in the float-type carburetor and the manifold. Pressure-type carburetors can be protected from serious Icing by proper location of the fuel-discharge nozzle combined with suitable application of heat to critical parts

Twisted, multifilament Nb3Sn superconductive ribbon

An experimental study of superconductor stabilization has resulted in the successful application of the concepts of filamentary structure and conductor twist to Nb3Sn ribbon. The Nb3Sn is formed in parallel, helical paths, which are continuous around the ribbon. Short lengths (12-18cm) of 1.27 cm wide superconductive ribbon were produced. The filamentary and twist characteristics are incorporated in the ribbon by means of an inert mask formed on the ribbon surface early in the fabrication process. Diffusion reaction of the niobium and tin is prevented at the filament boundaries. Described are the conductor methods of fabrication, and test results obtained. The technology required to adapt the processes for the production of long lengths of ribbon is available

Error Estimates for Measurements of Cosmic Shear

In the very near future, weak lensing surveys will map the projected density of the universe in an unbiased way over large regions of the sky. In order to interpret the results of studies it is helpful to develop an understanding of the errors associated with quantities extracted from the observations. In a generalization of one of our earlier works, we present estimators of the cumulants and cumulant correlators of the weak lensing convergence field, and compute the variance associated with these estimators. By restricting ourselves to so-called compensated filters we are able to derive quite simple expressions for the errors on these estimates. We also separate contributions from cosmic variance, shot noise and intrinsic ellipticity of the source galaxies.Comment: 12 pages, including 5 figures, uses mn.sty. Substantially revised version accepted by MNRA

The flying hot wire and related instrumentation

A flying hot-wire technique is proposed for studies of separated turbulent flow in wind tunnels. The technique avoids the problem of signal rectification in regions of high turbulence level by moving the probe rapidly through the flow on the end of a rotating arm. New problems which arise include control of effects of torque variation on rotor speed, avoidance of interference from the wake of the moving arms, and synchronization of data acquisition with rotation. Solutions for these problems are described. The self-calibrating feature of the technique is illustrated by a sample X-array calibration

Hearing and Echolocation in the Australian Grey Swiftlet, Collocalia Spodiopygia

The frequency sensitivity of hearing in the grey swiftlet, Collocalia spodiopygia, was determined by neuronal recordings from the auditory midbrain (MLD). The most sensitive best frequency response thresholds occurred between 0.8 and 4.7 kHz, with the upper frequency limit near 6 kHz. Spectral analysis of echolocation click pairs revealed energy peaks between 3.0 and 8.0kHz for the foreclick, compared to 4.0-6.0 kHz for the principal click. The relationship between good hearing sensitivity and click energy peaks in the swiftlet extends about an octave higher than it does in the oilbird (Steatornis caripensis)