Slow Frequency Hopping Assisted MC DS-CDMA using Large Area Synchronised Spreading Sequences

The family of Multi-Carrier Direct-Sequence CDMA (MC DS- CDMA) systems exhibits numerous attractive properties, which render them attractive candidates for next-generation wireless communications. We demonstrate that spreading codes exhibiting a so-called interference-free window (IFW) are capable of outperforming classic spreading codes, when the interfering multi-user and multipath components arrive within this IFW. The best possible quasi-synchronous timing of the spreading sequences has to be adjusted with the aid of accurate adaptive timing advance control, which has to be significantly more accurate than that used in the lower-bit-rate second-generation GSM system. Fortunately, the IFW duration may be extended with the advent of multi-carrier DS-CDMA proportionately to the number of subcarriers. Hence the resultant MC DS-CDMA system is capable of exhibiting a near-single-user performance without employing a multi-user detector. A deficiency of the resultant system is that the number of spreading codes exhibiting a certain IFW is limited and so is the IFW duration. This contribution sets out to mitigate the above-mentioned shortcomings so that when the users' delays are in the range of the IFW, we separate them with the aid of the unique, user-specific LAS spreading codes. By contrast, when the users roam at a high distance from the base-station and hence their received signal arrive outside the range of the IFW, we separate them using their unique frequency hopping patterns

Downlink Space–Time Spreading Using Interference Rejection Codes

In this paper, the authors will investigate the performance of a loosely synchronized (LS) code-based space–time spreading (STS) scheme in comparison to that of classic Walsh code and pseudonoise code-based STS when communicating over dispersive Nakagami-m multipath channels. Closed-form formulas are derived for characterizing the bit-error-rate performance as a function of the number of resolvable paths L and the number of users K. Our numerical results suggest that the employment of LS code-based STS scheme is beneficial in a low-user-load and low-dispersion channel scenario, where a near-single-user performance can be achieved without a multiuser detector. Index Terms—Code-division multiple access (CDMA), Gaussian approximation, interference-free window (IFW), large area synchronized (LAS) codes, loosely synchronized (LS) codes, Nakagami-m fading

Multiuser Detection Assisted Time- and Frequency-Domain Spread Multicarrier Code-Division Multiple-Access

In this contribution, we study a reduced-complexity multiuser detection aided multicarrier direct-sequence code-division multiple-access (MC DS-CDMA) scheme, which employs both time (T)-domain and frequency (F)-domain spreading. We investigate the achievable detection performance in the context of synchronous TF-domain spread MC DS-CDMA when communicating over an additive white Gaussian noise (AWGN) channel. Five detection schemes are investigated, which include the single-user correlation based detector, the joint TF-domain decorrelating multiuser detector (MUD), the joint TF-domain MMSEMUD, the separate TF-domain decorrelating/MMSE MUD, and the separate TF-domain MMSE/decorrelating MUD. Our simulation results show that the separate TF-domain MUD schemes are capable of achieving a similar bit error rate (BER) performance to that of the significantly more complex joint TF-domain MUD schemes. Index Terms—Code-division multiple-access (CDMA), decorrelating, frequency-domain spreading, joint detection, minimum mean square error (MMSE), multicarrier (MC), multiuser detection, separate detection, time-domain spreading

A Space-Time Spreading Assisted Multicarrier DS-CDMA System using OVSF Codes Employing Adaptive Mode Switching Thresholds and Adaptive Modulation

The Concept of Space-Time Spreading (STS) assisted, Adaptive Quadrature Amplitude Modulation (AQAM) aidedMC DS-CDMAis introduced. The AQAMmode-switching thresholds are determined using an on-line real-time Bit-Error-Ratio (BER) based learning procedure. Four different schemes were studied, designed for maintaining a given target BER of 10?2, 10?3, 10?4 and 10?5 both with and without turbo channel coding. The effect of using different number of STS antennas ranging from1 to 8 was also characterized in terms of the achievable effective throughput, characterising the associated system design trade-offs

LAS-CDMA using Various Time Domain Chip-Waveforms

LAS CDMA exhibits a significantly better performance than that of classic random code based DS-CDMA, when operating in a quasi-synchronous scenario. Classic frequency-domain raised cosine Nyquist filtering is known to show the best possible performance, but its complexity may be excessive in highchip-rate systems. Hence in these systems often low-complexity time-domain waveform shaping is considered. Motivated by this fact, the achievable performance of LAS-CDMA is investigated in conjunction with three different time-limited chipwaveforms, which exhibit an infinite bandwidth. The raised cosine time-domain waveform based DS-CDMA system is shown to achieve the best performance in the context of a strictly band-limited system, because its frequency-domain spectral side-lobes are relatively low

On the Uplink Performance of Asynchronous LAS-CDMA

In this paper closed-form formulae are derived for characterizing the BER performance of Large Area Synchronous CDMA (LAS-CDMA) as a function of both the number of resolvable paths Lp and the maximum delay difference τmax, as well as the number of users K, when communicating over a Nakagami-m fading channel. Moreover, we comparatively studies the performance of LAS-CDMA and the traditional random code based DS-CDMA

Coding against Spreading Gain Optimization of Nonbinary BCH Coded CDMA System

The joint analytical optimisation of the spreading gain and coding gain of nonbinary BCH coded CDMA communication systems is considered in both single-cell and multi-cell scenarios. Furthermore, two types of detectors were employed, namely the minimum mean square error multiuser detector and the classic single-user matched filter detector. It is shown that the optimum coding rate varied over a wide range

Subject-specific finite element modelling of the human hand complex : muscle-driven simulations and experimental validation

This paper aims to develop and validate a subject-specific framework for modelling the human hand. This was achieved by combining medical image-based finite element modelling, individualized muscle force and kinematic measurements. Firstly, a subject-specific human hand finite element (FE) model was developed. The geometries of the phalanges, carpal bones, wrist bones, ligaments, tendons, subcutaneous tissue and skin were all included. The material properties were derived from in-vivo and in-vitro experiment results available in the literature. The boundary and loading conditions were defined based on the kinematic data and muscle forces of a specific subject captured from the in-vivo grasping tests. The predicted contact pressure and contact area were in good agreement with the in-vivo test results of the same subject, with the relative errors for the contact pressures all being below 20%. Finally, sensitivity analysis was performed to investigate the effects of important modelling parameters on the predictions. The results showed that contact pressure and area were sensitive to the material properties and muscle forces. This FE human hand model can be used to make a detailed and quantitative evaluation into biomechanical and neurophysiological aspects of human hand contact during daily perception and manipulation. The findings can be applied to the design of the bionic hands or neuro-prosthetics in the future