Polyethylene Terephthalate Wastes as a Partial Replacement for Fine Aggregates in Concrete Mix, Case of Jimma Town, South West Ethiopia

In this research Concrete mix designs were prepared according to the DOE method and a total of 6 mixes with 72 samples prepared to consist of concrete grade C-25. The test samples were produced with the percentage of substitution for the fine aggregate by 1, 2, 3, 4, and 5% of PET plastic waste aggregate. Moreover, a control mix without replacement for the fine aggregate was used to have a relative analysis. The prepared samples consist of concrete cubes, cylinders, and beams. Furthermore, laboratory experiments were carried out for the prepared concrete test samples. The lists of experiments conducted were; material property, slump, unit weight, compressive strength, splitting tensile strength, and flexural strength tests. The test results were analyzed and compared with the respective conventional concrete characteristics and show that there was a slight increase in compressive strength of the concrete up to 3% replacement and reduction in compressive strength increases beyond 3% replacement due to the replacement of PET aggregates. Also like compressive strength there was an increase of tensile strength recorded with increasing PET bottle aggregate content up to 3% replacement. But more than 3% substitution of fine aggregate with PET bottle fiber results in a reduction in tensile strength, flexural strength. This test result shows that as it is possible to use PET bottles in concrete production as a partial substitution for fine aggregates not more than 3% replacement

Global injury morbidity and mortality from 1990 to 2017 : results from the Global Burden of Disease Study 2017

Correction:Background Past research in population health trends has shown that injuries form a substantial burden of population health loss. Regular updates to injury burden assessments are critical. We report Global Burden of Disease (GBD) 2017 Study estimates on morbidity and mortality for all injuries. Methods We reviewed results for injuries from the GBD 2017 study. GBD 2017 measured injury-specific mortality and years of life lost (YLLs) using the Cause of Death Ensemble model. To measure non-fatal injuries, GBD 2017 modelled injury-specific incidence and converted this to prevalence and years lived with disability (YLDs). YLLs and YLDs were summed to calculate disability-adjusted life years (DALYs). Findings In 1990, there were 4 260 493 (4 085 700 to 4 396 138) injury deaths, which increased to 4 484 722 (4 332 010 to 4 585 554) deaths in 2017, while age-standardised mortality decreased from 1079 (1073 to 1086) to 738 (730 to 745) per 100 000. In 1990, there were 354 064 302 (95% uncertainty interval: 338 174 876 to 371 610 802) new cases of injury globally, which increased to 520 710 288 (493 430 247 to 547 988 635) new cases in 2017. During this time, age-standardised incidence decreased non-significantly from 6824 (6534 to 7147) to 6763 (6412 to 7118) per 100 000. Between 1990 and 2017, age-standardised DALYs decreased from 4947 (4655 to 5233) per 100 000 to 3267 (3058 to 3505). Interpretation Injuries are an important cause of health loss globally, though mortality has declined between 1990 and 2017. Future research in injury burden should focus on prevention in high-burden populations, improving data collection and ensuring access to medical care.Peer reviewe

Global burden of 369 diseases and injuries in 204 countries and territories, 1990–2019: a systematic analysis for the Global Burden of Disease Study 2019

Background: In an era of shifting global agendas and expanded emphasis on non-communicable diseases and injuries along with communicable diseases, sound evidence on trends by cause at the national level is essential. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) provides a systematic scientific assessment of published, publicly available, and contributed data on incidence, prevalence, and mortality for a mutually exclusive and collectively exhaustive list of diseases and injuries. Methods: GBD estimates incidence, prevalence, mortality, years of life lost (YLLs), years lived with disability (YLDs), and disability-adjusted life-years (DALYs) due to 369 diseases and injuries, for two sexes, and for 204 countries and territories. Input data were extracted from censuses, household surveys, civil registration and vital statistics, disease registries, health service use, air pollution monitors, satellite imaging, disease notifications, and other sources. Cause-specific death rates and cause fractions were calculated using the Cause of Death Ensemble model and spatiotemporal Gaussian process regression. Cause-specific deaths were adjusted to match the total all-cause deaths calculated as part of the GBD population, fertility, and mortality estimates. Deaths were multiplied by standard life expectancy at each age to calculate YLLs. A Bayesian meta-regression modelling tool, DisMod-MR 2.1, was used to ensure consistency between incidence, prevalence, remission, excess mortality, and cause-specific mortality for most causes. Prevalence estimates were multiplied by disability weights for mutually exclusive sequelae of diseases and injuries to calculate YLDs. We considered results in the context of the Socio-demographic Index (SDI), a composite indicator of income per capita, years of schooling, and fertility rate in females younger than 25 years. Uncertainty intervals (UIs) were generated for every metric using the 25th and 975th ordered 1000 draw values of the posterior distribution. Findings: Global health has steadily improved over the past 30 years as measured by age-standardised DALY rates. After taking into account population growth and ageing, the absolute number of DALYs has remained stable. Since 2010, the pace of decline in global age-standardised DALY rates has accelerated in age groups younger than 50 years compared with the 1990–2010 time period, with the greatest annualised rate of decline occurring in the 0–9-year age group. Six infectious diseases were among the top ten causes of DALYs in children younger than 10 years in 2019: lower respiratory infections (ranked second), diarrhoeal diseases (third), malaria (fifth), meningitis (sixth), whooping cough (ninth), and sexually transmitted infections (which, in this age group, is fully accounted for by congenital syphilis; ranked tenth). In adolescents aged 10–24 years, three injury causes were among the top causes of DALYs: road injuries (ranked first), self-harm (third), and interpersonal violence (fifth). Five of the causes that were in the top ten for ages 10–24 years were also in the top ten in the 25–49-year age group: road injuries (ranked first), HIV/AIDS (second), low back pain (fourth), headache disorders (fifth), and depressive disorders (sixth). In 2019, ischaemic heart disease and stroke were the top-ranked causes of DALYs in both the 50–74-year and 75-years-and-older age groups. Since 1990, there has been a marked shift towards a greater proportion of burden due to YLDs from non-communicable diseases and injuries. In 2019, there were 11 countries where non-communicable disease and injury YLDs constituted more than half of all disease burden. Decreases in age-standardised DALY rates have accelerated over the past decade in countries at the lower end of the SDI range, while improvements have started to stagnate or even reverse in countries with higher SDI. Interpretation: As disability becomes an increasingly large component of disease burden and a larger component of health expenditure, greater research and developm nt investment is needed to identify new, more effective intervention strategies. With a rapidly ageing global population, the demands on health services to deal with disabling outcomes, which increase with age, will require policy makers to anticipate these changes. The mix of universal and more geographically specific influences on health reinforces the need for regular reporting on population health in detail and by underlying cause to help decision makers to identify success stories of disease control to emulate, as well as opportunities to improve. Funding: Bill & Melinda Gates Foundation. © 2020 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 licens

Global, regional, and national burden of disorders affecting the nervous system, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BackgroundDisorders affecting the nervous system are diverse and include neurodevelopmental disorders, late-life neurodegeneration, and newly emergent conditions, such as cognitive impairment following COVID-19. Previous publications from the Global Burden of Disease, Injuries, and Risk Factor Study estimated the burden of 15 neurological conditions in 2015 and 2016, but these analyses did not include neurodevelopmental disorders, as defined by the International Classification of Diseases (ICD)-11, or a subset of cases of congenital, neonatal, and infectious conditions that cause neurological damage. Here, we estimate nervous system health loss caused by 37 unique conditions and their associated risk factors globally, regionally, and nationally from 1990 to 2021.MethodsWe estimated mortality, prevalence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs), with corresponding 95% uncertainty intervals (UIs), by age and sex in 204 countries and territories, from 1990 to 2021. We included morbidity and deaths due to neurological conditions, for which health loss is directly due to damage to the CNS or peripheral nervous system. We also isolated neurological health loss from conditions for which nervous system morbidity is a consequence, but not the primary feature, including a subset of congenital conditions (ie, chromosomal anomalies and congenital birth defects), neonatal conditions (ie, jaundice, preterm birth, and sepsis), infectious diseases (ie, COVID-19, cystic echinococcosis, malaria, syphilis, and Zika virus disease), and diabetic neuropathy. By conducting a sequela-level analysis of the health outcomes for these conditions, only cases where nervous system damage occurred were included, and YLDs were recalculated to isolate the non-fatal burden directly attributable to nervous system health loss. A comorbidity correction was used to calculate total prevalence of all conditions that affect the nervous system combined.FindingsGlobally, the 37 conditions affecting the nervous system were collectively ranked as the leading group cause of DALYs in 2021 (443 million, 95% UI 378–521), affecting 3·40 billion (3·20–3·62) individuals (43·1%, 40·5–45·9 of the global population); global DALY counts attributed to these conditions increased by 18·2% (8·7–26·7) between 1990 and 2021. Age-standardised rates of deaths per 100 000 people attributed to these conditions decreased from 1990 to 2021 by 33·6% (27·6–38·8), and age-standardised rates of DALYs attributed to these conditions decreased by 27·0% (21·5–32·4). Age-standardised prevalence was almost stable, with a change of 1·5% (0·7–2·4). The ten conditions with the highest age-standardised DALYs in 2021 were stroke, neonatal encephalopathy, migraine, Alzheimer's disease and other dementias, diabetic neuropathy, meningitis, epilepsy, neurological complications due to preterm birth, autism spectrum disorder, and nervous system cancer.InterpretationAs the leading cause of overall disease burden in the world, with increasing global DALY counts, effective prevention, treatment, and rehabilitation strategies for disorders affecting the nervous system are needed

Optimization of oil extraction process from blended sludge and algae for biodiesel production

Sewage sludge is one of the most polluting wastes that affect the environment, which contains organic and inorganic pollutants released into the surroundings. Using non-renewable energy for the engine also releases large amounts of pollutants results from combustion products was other issues to the environment. The decline of non-renewable energy sources, such as natural gas, fossil fuel, and petroleum made the world increase the production of alternative fuels like waste-derived fuels. Recently, biodiesel production developed from edible oil to cover the depilation of non-renewable energy supply. But it has also become a significant challenge for food security. Therefore, finding other potential opportunities for lipid extraction is crucial. Algae and sludge conversion presented by recent studies seem to be a promising method. The paper presents the extraction and optimization of lipids from blended sludge and algae for biodiesel production. The procedure of the study was a characterization of algal and sludge wastes, the extraction of the lipid component by Soxhlet extraction, and the parameters optimization for maximum oil yield obtain. Temperature, extraction time, and solvents were the basic factor affect oil extraction yield. In the optimization 80 temperature, 6hrs time and hexane solvent results in 61% oil extraction yield which maximum point. Algae and wastewater sludge high potential of lipid and can be substitute edible oil supplies for biodiesel production

Water purification improvement using moringa oleifera seed extract pastes for coagulation follow scoria filtration

Currently, millions of people are exposed to dangerous levels of chemical and biological water pollution in drinking water due to source contamination. The rising of populations and industrialization or agricultural wastewaters were causes of water contaminations. The aim of this study was to design, develop and performance evaluation of point of use drinking water purification technology using MoringaOleifera seed coupled followed by scoria coag-filtration media. Experimental laboratory based aquas solution of contaminated water was prepared for evaluations. Moringa Oleifera seed coagulation/flocculation and sedimentation tests were carried out using jar test with the batch experiment. The potential treatment of the sequential ordered unit process stages were evaluated by the determination of physicochemical parameters of the water; such as turbidity, Color, PO4−3, Fe+3 and F−concentration. The factor that affects the purification where coagulant doses, pH, and contact time. Based on this, the physicochemical parameter analysis indicated that turbidity from (150-8NTU), PO4−3 (20–5.95 mg/L), Fe+3 (7–2.93 mg/L) and F− (9–2.83 mg/L), Moringa Oleifera seed dose (10–40 mL/L) extract paste. The maximum pollutant removal efficiency was achieved at 35 mL/L of Moringa Oleifera seed extractdose, within 6.5–7.5 pH range. Then VSco filtration was conducted after jar test under small column experiment as a function of contact time (0, 2, 4 h s). The VSco removal capacity showed that the removal of turbidityfrom (8–2.54NTU), PO4−3 (5.95–1.07 mg/L), Fe+3 (2.93–0.43 mg/L) and F− (2.83–1.94 mg/L) were achieved after 4hr detention time. The percent removal of turbidity, PO4−3, Fe+3 and F− increases remarkably with increasing of their initial concentration. At an initial concentration of turbidity (150NTU), PO4−3 (20 mg/L), Fe+3 (7 mg/L) and F−(9 mg/L), the removal efficiency were 98%, 84%, 85% and 60% respectively. Therefore, we recommend Moringa Oleifera seed –Vscoas an economic, efficient and simple Point of Use drinking water treatment technology

Chromium removal from tannery effluents by adsorption process via activated carbon chat stems (Catha edulis) using response surface methodology

Abstract Objective In tannery processing, water consumption is high, which generates wastewater as a by-product and numerous pollutants such as chromium heavy metals that make adverse effects of water bodies and the surrounding environment. This study analyzed, chromium (VI) removal from wastewater through activated carbon chat stem was investigated. Adsorption is a common treatment method via activated carbon due to its cost-effective, profitable, and removal efficiency of these heavy metals. Results The proximate analysis of moisture content of chat stem has 6%, activated carbon ash content of 17.35%, volatile materials of 20.12%, and fixed carbon contents of 56.53%, which are well-matched the standards quality of activated carbon. As the process parameter varies, the increment of the chromium removal efficiency was from 62.5 to 97.03%. The maximum adsorption efficiency was observed at 30 g/L dosage of the adsorbent, at pH 4, and contact time at 180 min of activated carbon from chat stem waste was found 97.03%. FTIR was used to characterize the surface of the chat stem before and after adsorption. Langmuir and Freundlich are used for short contact time’s adsorption isotherm 0.9839 and 0.9995 respectively, which conformed, no visible change in the corrosion state

BIFLAVONOIDS FROM THE ROOTS OF RHUS RUSPOLII AND EVALUATIONS OF THEIR ANTIOXIDANT ACTIVITIES

Deresa DA, Abdissa Z, Gurmessa GT, et al. BIFLAVONOIDS FROM THE ROOTS OF RHUS RUSPOLII AND EVALUATIONS OF THEIR ANTIOXIDANT ACTIVITIES. Bulletin of the Chemical Society of Ethiopia . 2022;36(3):667-674.Biflavonoids are C-C or C-O-C linked flavonoid dimers with highly restricted presence in plant species. They are extensively reported to possess interesting pharmacological properties. The chromatographic fractionation and purification of CH2Cl2/MeOH (1:1) extract of the root of Rhus ruspolli led to the isolation of a new biflavonoid (1) along with four other known biflavonoids (2-5). The structure of the compounds were identified based on the analysis of NMR spectroscopic and mass spectrometric data and also in comparison with reported literature data. Compounds 2-5 were assayed for their antioxidant activity using DPPH and displayed potent in vitro antioxidant activities. The percentage radical scavenging activities were 78.32, 68.90, 93.22 and 92.00 for compounds 2-5, respectively. The highest activity was observed for compound 4 and 5 with IC50 values of 7.90 and 8.40, respectively, which are even greater than that of ascorbic acid (IC50 9.90). The high antioxidant activity of the compounds could be due to the presence of free hydroxyl groups in the flavonoids. The antioxidant activities of these compounds support the traditional uses of the plant in treatment of wound, ectoparasite and as antibacteria and indicates the potential use of these compounds as drug lead candidates

Optimization of microwave-assisted hydro-distillation essential oil extracted from Rumex Crispus leaves using definitive screening design

Conversion of nonfood natural products to value-added products is an important work, which is going on worldwide. In addition, to obtain a product with better quality, a sufficient separation method is helpful to improve its utilization value by using effective, rapid and environmentally friendly techniques. Thus in this work, the microwave-assisted hydrodistillation (MAHD) process of essential oils from important natural plant Rumex Crispus leaves was investigated. The experimental design and extraction conditions were optimized using a definitive screening design. The yield of essential oils of 4.67 ± 0.02 % was investigated under the optimum conditions; 534.89 W of microwave power, 23.48 min of hydrodistillation time and 4.5 mL/g of the volume of water to plant mass ratio. Under these conditions, the essential oils were analyzed using gas chromatography-mass spectrometry (GC–MS). Results revealed that the essential oil extracted by MAHD possessed high quality as proved by its higher percentage of oxygenated compounds. In addition, α-santol (29.63 %) and β-santol (25.60 %) are the primary components of oxygenated compounds in essential oils. In conclusion, the MAHD was successfully employed to obtain mainly Oxygenated compounds-rich essential oil that may be used in several industrial applications. Subsequently, a definitive screening design may be regarded as an alternative and reliable method for the prediction of experimental parameters. It was concluded that the weeds plant (Rumex Crispus) contains a reliable quantity of oils that is extremely feasible to use and recommended as good feedstock for possible use in industrial applications

Ecofriendly green synthesis and characterization of silver zinc oxide nanocomposite using the aqueous leaf extract of Rumex Crispus: Evaluation of its antimicrobial and antioxidant activity

The hydrothermal approach is used in the current study to create an environmentally friendly silver zinc oxide nanocomposite utilizing an aqueous leaf extract of Rumex Crispus. The photochemical components of Rumex Crispus, a synthetic nanocomposite with antioxidant and antibacterial activity, were also assessed. The Response Surface Methodology of Definitive Screen Design (DSD) was used to examine and optimize the effects of four independent variables on the amount of green synthesized silver zinc oxide nanocomposite in Rumex Crispus extract. According to the experimental findings, the green synthesized silver zinc oxide nanocomposite's maximum 1.89 absorbance intensity was achieved at a reaction temperature of 60 °C, a concentration of silver nitrate salt of 100 mM, a pH value of 11, and a reaction period of 3 h. The synthesized nanocomposite was characterized using Fourier-transform infrared, UV, X-ray, UV–vis, Dynamic Light Scattering, thermogravimetric analysis, and differential thermal analysis to determine its functional group, structure, bandgap energy, size distribution, a mass of loss, and energy gain or loss, respectively. The minimum lethal doses for the gram-positive, gram-negative, and fungal strains were 1.25, 0.625, and 2.5 g ml−1 respectively. The 1-1-diphenyl-2-picryl hydrazyl (DPPH) which was used to measure antioxidant activity is scavenged by Ag–ZnO nanocomposites, and the IC50 value of a Rumex Crispus extract is 29.31 g ml-1 IC50 value is.29.31 μg ml– 1. Their findings show that Rumex Crispus extract-derived synthetic silver zinc oxide nanocomposite is a promising alternative against both Gram-positive and Gram-negative bacterial strains and fungal strains, as well as a prospective choice for antioxidants under the given conditions