Cai, Rui

Jin, Tan

Lu, Ange

Qu, Meina

Xie, Guizhi

English

Potassium dihydrogen phosphate (KDP) is a non-linear material used in various opto-electronic applications including Q-switches, high-speed photography shutters, frequency harmonic generation lens and Pockels cells in the Inertial Confinement Fusion (ICF) devices. KDP belongs to the most difficult-to-cut material, due to its delicate and unique characteristics including the combination of softness with brittleness, anisotropic performances, tendency for deliquescence and sensitivity to temperature change. Single point diamond turning (SPDT) is considered to be the ideal method for machining KDP components. However, the process efficiency is rather low and often accompanied with severe tool wear issues. This paper studies the feasibility using grinding method to remove the surface material of KDP components with high process efficiency and low damage, fulfilling the task of re-aligning the surface orientation to the crystalline axis. The grinding tests were carried out on a common CNC grinder, using resin bonded diamond grinding wheel, whilst the diamond abrasives are coated with Ni-P alloy. The direction of precision grinding was determined by studying the anisotropy of KDP, including its elastic modulus E, Vickers hardness HV and fracture toughness KIC, to reduce the influence of material anisotropy on machining quality. The grinding process parameters were preliminarily determined based on the experimental results investigating the effects of peripheral speed of the grinding wheel, worktable feed rate and grinding depth on the ground surface roughness. The surface defects, surface morphology and sub-surface damage under different process parameters were investigated. Surface roughness Ra ≤ 0.3 μm and sub-surface damage depth SSD ≤ 6 μm were obtained. The machining efficiency can be improved by nearly ten times using the proposed precision grinding method, producing nearly the same surface quality (Ra ≤ 0.2 μm, SSD ≤ 6 μm) as that in the axis fixing phase in SPDT

Coventry University Pure Portal

Realization of High Efficiency and Low Damage Machining of Anisotropic KDP Crystal by Grinding

https://pure.coventry.ac.uk/ws/files/21591284/Binder1.pdf

Realization of High Efficiency and Low Damage Machining of Anisotropic KDP Crystal by Grinding

Abstract

Similar works

Full text

Available Versions

Coventry University Pure Portal