Wind turbines operate in the atmospheric boundary layer, where they are
exposed to the turbulent atmospheric flows. As the response time of wind
turbine is typically in the range of seconds, they are affected by the small
scale intermittent properties of the turbulent wind. Consequently, basic
features which are known for small-scale homogeneous isotropic turbulence, and
in particular the well-known intermittency problem, have an important impact on
the wind energy conversion process. We report on basic research results
concerning the small-scale intermittent properties of atmospheric flows and
their impact on the wind energy conversion process. The analysis of wind data
shows strongly intermittent statistics of wind fluctuations. To achieve
numerical modeling a data-driven superposition model is proposed. For the
experimental reproduction and adjustment of intermittent flows a so-called
active grid setup is presented. Its ability is shown to generate reproducible
properties of atmospheric flows on the smaller scales of the laboratory
conditions of a wind tunnel. As an application example the response dynamics of
different anemometer types are tested. To achieve a proper understanding of the
impact of intermittent turbulent inflow properties on wind turbines we present
methods of numerical and stochastic modeling, and compare the results to
measurement data. As a summarizing result we find that atmospheric turbulence
imposes its intermittent features on the complete wind energy conversion
process. Intermittent turbulence features are not only present in atmospheric
wind, but are also dominant in the loads on the turbine, i.e. rotor torque and
thrust, and in the electrical power output signal. We conclude that profound
knowledge of turbulent statistics and the application of suitable numerical as
well as experimental methods are necessary to grasp these unique features (...)Comment: Accepted by the Journal of Turbulence on May 17, 201
