The colloidal transport and deposition are phenomena involved in different engineering problems. In
the environmental engineering field the use of micro- and nano-scale zerovalent iron (M-NZVI) is one
of the most promising technologies for groundwater remediation. Colloid deposition is normally
studied from a micro scale point of view and the results are then implemented in macro scale models
that are used to design field-scale applications.
The single collector efficiency concept predicts particles deposition onto a single grain of a complex
porous medium in terms of probability that an approaching particle would be retained on the solid
grain. Different approaches and models are available in literature to predict it, but most of them fail in
some particular conditions (e.g. low fluid velocity and/or very small or very big particle dimension)
because they predict efficiency values exceeding unity.
By analysing particle fluxes and deposition mechanisms and performing a mass balance on the entire
domain, the traditional definition of efficiency was reformulated and a novel total flux normalized
correlation equation is proposed for predicting single-collector efficiency under a broad range of
parameters. The new equation has been formulated starting from a combination of Eulerian and
Lagrangian numerical COMSOL Multiphysics® simulations, performed under Smoluchowski-Levich
conditions in a geometry which consists of a sphere enveloped by a cylindrical control volume (Figure
1). The normalization of the deposited flux is performed accounting for all of the particles entering
into the control volume through all transport mechanisms (not just the upstream convective flux as
conventionally done) to provide efficiency values lower than one under any possible combination of
transport mechanisms. The particle fluxes onto the collector and through the control volume have been
described mathematically as a summation of terms. In order to guarantee the independence of each
term, the correlation equation is derived through a rigorous hierarchical parameter estimation process,
accounting for single and mutual interacting transport mechanisms.
The new correlation equation provides efficiency values lower than one over a wide range of
parameters (Figure 2) and it is valid both for point and finite-size particles. Moreover the correlation
equation is extended to include porosity dependence and reduced forms are also proposed by
elimination of the less relevant terms without losing the main features of the full equation