Antusch, S.

Commin, L.

Heneka, J.

Müller, M.

Rieth, M.

Walter, H.

Weingärtner, T.

English

KITopen

IAM-WPT1 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.20132Component Powder Injection Molding (2C PIM)Activity 4: Material TechnologiesWP12-MAT-01-HHFM-04-04/KIT/PSReporting period: June 2012 – February 2012Principal Investigator: Steffen AntuschPresenter: Michael RiethKIT-IAMContributions: Lorelei Commin, Jochen Heneka, Marcus Müller, Michael Rieth, Heinz Walter, Tobias WeingärtnerIAM-WPT2 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013 Investigation of multi-phase PIM to extend the fabrication process for more complex functional high heat flux parts(1) Implementing of the new 2Component-PIM (2C-PIM) tool (2) Producing of 2C-PIM parts: W tile + W-2La2O3 timble W tile + W-2Y2O3 thimble(3) Modulate of the Heat-treatment process(4) Characterization of the joining zone quality(5) Integration of interlayer within 2C-PIMObjectiveIAM-WPT3 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013(1) Implementing of the new 2C-PIM toolIAM-WPT4 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013S. Antusch et al., Fusion Engineering and Design (2012) submitted.Fully automatic mass production of parts:50 SECONDS for 1 Mockup  (2) Producing of 2C-PIM partsIAM-WPT5 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013(4) CharacterizationJoining without brazingS. Antusch et al., Journal of Nuclear Materials (2012) submitted. High quality of the jointMaterial connection are successfulNo gaps or cracks in the seam of the joining zoneIAM-WPT6 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013Powder Injection Molding   =   tool  Near-net-shape forming process for parts and components Joining technique Material developmentConclusionsIAM-WPT7 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013Outlook Work Programme for 2013Goal 2013: Development of a multiphase PIM tool(1) Development of new Designs for HC + WC Divertor (in close Cooperation withCCFE)(2) Engineering and design of a new multiphase PIM tool(3) Production of parts with the new tool(4) Adaption of the heat-treatment process (in close cooperation with PLANSEE SE)(5) Characterization of mechanical and physical properties (in close cooperation with OXFORD Materials)(6) HHF testing (in close cooperation with FZ Jülich and IPP Garching) and characterization after testingIAM-WPT8 Steffen Antusch – Activity 4 EFDA MAT-HHFM Monitoring Meeting Garching 20. – 22. 02.201310.12.2013Thank you very much!

2Component-powder injection molding (2C-PIM)

https://publikationen.bibliothek.kit.edu/230093994/3816436

2Component-powder injection molding (2C-PIM)

Abstract

Similar works

Full text

Available Versions

KITopen