We present a mixed reality application (HoloFEM) for the Microsoft HoloLens.
The application lets a user define and solve a physical problem governed by
Poisson's equation with the surrounding real world geometry as input data.
Holograms are used to visualise both the problem and the solution. The finite
element method is used to solve Poisson's equation. Solving and visualising
partial differential equations in mixed reality could have potential usage in
areas such as building planning and safety engineering.Comment: 2 pages, 9 figure

Logg, Anders

Lundholm, Carl

Nordaas, Magne

English

arXiv

We present a mixed reality application (HoloFEM) for the Microsoft HoloLens. The application lets a user define and solve a physical problem governed by Poisson\u27s equation with the surrounding real world geometry as input data. Holograms are used to visualise both the problem and the solution. The finite element method is used to solve Poisson\u27s equation. Solving and visualising partial differential equations in mixed reality could have potential usage in areas such as building planning and safety engineering

Chalmers Research

Solving Poisson’s Equation on the Microsoft HoloLens

We present a mixed reality application (HoloFEM) for the Microsoft HoloLens. The application lets a user define and solve a physical problem governed by Poisson's equation with the surrounding real world geometry as input data. Holograms are used to visualise both the problem and the solution. The finite element method is used to solve Poisson's equation. Solving and visualising partial differential equations in mixed reality could have potential usage in areas such as building planning and safety engineering

Chalmers Publication Library

Solving Poisson’s Equation on the Microsoft HoloLensAnders LoggChalmers University of TechnologyCarl LundholmChalmers University of TechnologyMagne NordaasChalmers University of TechnologyABSTRACTWe present a mixed reality application (HoloFEM) for the MicrosoftHoloLens. The application lets a user define and solve a physicalproblem governed by Poisson’s equation with the surrounding realworld geometry as input data. Holograms are used to visualise boththe problem and the solution. The finite element method is used tosolve Poisson’s equation. Solving and visualising partial differentialequations in mixed reality could have potential usage in areas suchas building planning and safety engineering.CCS CONCEPTS•Human-centered computing→Mixed / augmented reality;•Applied computing→Mathematics and statistics; •Mathemat-ics of computing→Mathematical software; Partial differentialequations;KEYWORDSHoloLens, Poisson’s equation, finite element method, FEniCSACM Reference Format:Anders Logg, Carl Lundholm, and Magne Nordaas. 2017. Solving Poisson’sEquation on the Microsoft HoloLens. In Proceedings of VRST ’17 . ACM, NewYork, NY, USA, 2 pages. https://doi.org/10.1145/3139131.31417771 INTRODUCTIONWe develop an application, called HoloFEM, for solving Poisson’sequation with the finite element method (FEM) using Microsoft’smixed reality glasses HoloLens [Microsoft 2017]. The aim is to setup and solve a partial differential equation (PDE) in the real worldgeometry surrounding the HoloLens user, and then visualise thecomputed solution on top of the real surroundings in mixed reality.Partial differential equations are used to model many physicalprocesses, such as fluid flow, heat transport and electromagneticfields to name a few. We consider here the Poisson equation, whichserves a prototypical example of a PDE. This equation modelssteady-state diffusion and electrostatic potential. The Poisson prob-lem is mathematically formulated as: Find the solution u : Ω → Rsuch that {−∆u = f in Ω,u = д on ∂Ω, (1)where Ω ⊂ R3 is the solution domain, ∆ is the Laplace operator, fis a given source, д is a given boundary value of the solution, and∂Ω is the boundary of Ω.Permission to make digital or hard copies of part or all of this work for personal orclassroom use is granted without fee provided that copies are not made or distributedfor profit or commercial advantage and that copies bear this notice and the full citationon the first page. Copyrights for third-party components of this work must be honored.For all other uses, contact the owner/author(s).VRST ’17, November 8–10, 2017, Gothenburg, Sweden© 2017 Copyright held by the owner/author(s).ACM ISBN 978-1-4503-5548-3/17/11.https://doi.org/10.1145/3139131.3141777Since various PDEs often show up in modelling and engineeringproblems, there could be a potential use for mixed reality PDE-solving software that allows a user to define a problem, compute asolution, and study it on the spot. Say for example that we wouldlike to know how a dangerous substance spreads in a room aftera leak has sprung. The heat equation could be used as a simplisticmodel for describing this situation, potentially making applicationslike HoloFEM useful in building planning and safety engineering.Augmented, mixed, and virtual reality are already used in engi-neering, architecture, and design, see for example [Bendinger 2004;Heuveline et al. 2011], but to our knowledge there is currently noother mixed reality PDE-solving software.2 TECHNICAL DESCRIPTIONThe workflow of the application HoloFEM has three main stages.The first one is the meshing stage, where a computational mesh isgenerated from the environment. This is followed by the simulationstage, where the mathematical problem is formulated and solved.Finally, the solution is visualised in the last stage.2.1 MeshingThe Microsoft HoloLens can scan the user’s surroundings and ex-tract a discrete representation of the geometry, in the form of asurface mesh. This mesh is not adequate for numerical computa-tions – firstly, it is a surface mesh, while we need a volume meshto solve (1), and secondly, the mesh quality is rather poor.Instead, the main planes are extracted from the surface mesh.These will represent the walls, the floor and the ceiling of the roomin which the user is located. From this geometric representation,the computational volume mesh is constructed. The procedure sofar is summarised in Figure 1. The steps in the mesh generation areshown in Figure 2.Surroundings SurfacemeshPlanesSpace(polygon + height)VolumemeshHoloLens HoloToolkit HoloFEMGeometry pipelineFigure 1: The geometry pipeline shows the steps in goingfrom a spatial scan of the surroundings to a volume mesh.Convex hullof polygonInitialcrude triangulationLocalDelaunaytriangulationLocalStrang-Perssonsmoothing3D-LayeringMeshing pipelineIterateFigure 2: Themeshing pipeline demonstrates the generationof a volume mesh from a space, i.e., the last arrow in thegeometry pipeline.VRST ’17, November 8–10, 2017, Gothenburg, Sweden Anders Logg, Carl Lundholm, and Magne Nordaas2.2 SimulationThe user may configure the problem parameters by placing pointsources in the surroundings and setting boundary conditions onthe walls, floor, and ceiling of the room. This is done in a similarfashion to how holograms are usually placed with the HoloLens.When the user is satisfied with the problem specification, theproblem is discretised with the finite element method. The FEniCSform compiler [Logg et al. 2012a,b] is used to generate code forthe finite element assembly, see Figure 3. This means that this partof the program can easily be generalised to handle other PDEs.The assembled sparse linear system can be solved with standardtechniques, e.g., preconditioned Krylov subspace methods.Linearsystem ofequationsSolutionSimulation pipelinePDE-problemDiscretevariationalproblemMeshFigure 3: The simulation pipeline outlines how a mesh andPDE-problem are used to obtain a solution with FEM.2.3 VisualisationThe visualisation of the numerical solution takes advantage of themixed reality technology of the HoloLens. Holograms are placed atnodal points of the computational mesh, or at the cell centers, andare superimposed on the real world background. This simplisticapproach suffices for the current prototype. More sophisticatedapproaches could be developed specific to the engineering applica-tions considered.3 DEMO OVERVIEWIn its current state the application HoloFEM works mainly withvoice commands. A user, wearing the HoloLens, starts by saying“Scan room”. This initiates the scanning phase in which the sur-roundings are scanned by looking around the room. During thescanning phase a surface mesh is produced that shows what sur-faces have already been scanned, see the left part of Figure 4. Afterthe scanning phase is completed, the approximative geometricrepresentation of the room (a prism with polygonal base) is auto-matically created. A tetrahedral mesh is then generated with thevoice command “Generate mesh”. In the right part of Figure 4, partsof a space and a volume mesh are displayed.Figure 4: Meshes. Left: Surface mesh (yellow) of the sur-roundings. Right: Space (blue) and generated volume mesh(green).When the mesh has been generated, the user may define addi-tional problem data. The voice command for defining a source is“Create source”. This places a source in front of the user. The voicecommand for defining boundary conditions is “Set boundary value”.This sets the solution to be zero on the wall the user is looking at.In Figure 5, visualised problem data are shown.Figure 5: Problem data represented by holograms. Left:Source (fire ball) placed in room. Right: Zero value bound-ary conditions (ice patches) on wall.Once the desired problem data have been defined it is time tosolve the problem. The voice command for that is “Solve problem”.After the problem has been solved, the solution is automaticallyvisualised. The solution values at the nodal points of the volumemesh are represented by spheres. The size of a sphere is proportionalto the solution value. The spheres are also coloured according to anRGB-scale, where blue represents low values and red high values.See Figure 6 for a visualised solution.Figure 6: Solution represented by spheres. Left: Solutionand tetrahedral mesh used in simulation. Right: Solution to-gether with problem data used in simulation.4 CONCLUSIONSWe have developed an application for solving and visualising a PDEmodel with the Microsoft HoloLens. A user wearing the HoloLenscan scan the surroundings, define a mathematical model and see thenumerical solution superimposed on the real world, all within a mat-ter of seconds. This has potential applications in building planningand safety engineering. Future development includes extension toother PDE models and more sophisticated visualisation.REFERENCESAlberto Bendinger. 2004. New approaches in urban simulation and city planningusing virtual reality tools. In 1º Congreso Internacional Ciudad y Territorio Virtual,Barcelona, 3, 14 y 15 Septiembre 2004. Centre de Política de Sòl i Valoracions, 67–74.Vincent Heuveline, Sebastian Ritterbusch, and Staffan Ronnas. 2011. AugmentedReality for Urban Simulation Visualization. Preprint Series of the EngineeringMathematics and Computing Lab 0, 16 (2011).Anders Logg, Kent-Andre Mardal, and Garth Wells. 2012a. Automated solution ofdifferential equations by the finite element method: The FEniCS book. Vol. 84. SpringerScience & Business Media.Anders Logg, Kristian B Ølgaard, Marie E Rognes, and Garth N Wells. 2012b. FFC: theFEniCS form compiler. Automated Solution of Differential Equations by the FiniteElement Method (2012), 227–238.Microsoft. 2017. Microsoft HoloLens Homepage. (2017). Retrieved September 14, 2017from https://www.microsoft.com/en-us/hololens

Solving Poisson's Equation on the Microsoft HoloLens

Abstract

Similar works

Full text

Available Versions

Chalmers Research

Chalmers Publication Library