Kant, Yogesh

IACS Institutional Repository

Indian J, Phys. 73B (5), 725-729 (1999) lo iEU P  Ban international journalD e te r m in a t io n  o f  su r fa c e  te m p e r a tu r e  o v e r  p a r t ia lly  v e g e ta te d  h e te r o g e n e o u s  a r e a s  u s in g  sa te llite  d a taYogesh Kant and K V S BadarinathNational Remote Sensing Agency, (Department of Space, Government of India), Balanagar, Hyderabad-500 037. IndiaReceived 19 February 199H. accepted 16 June 1999Abstract . In the studies related to land surface processes, satellite data provides, important inputs for estimating regional surface emissivity and surface temperature The paper describes the capability of satellite data m determining the surface emssivity over heterogeneous areas by taking normalized difference vegetation index (NDVI) as modulating paiametcr at pixel resolution The methodology is based on the calculation of fraction vegetation cover per pixel taking NDVI, of the pure pixels as input The basic concept of traction of vegetation cover is used for the determination of surface emissivity and temperature The estimated emissivity values over the region had been found to be between 0.93 to 0 95 for soil, podu areas, 0.96 for scrub land, 0 97 to 0.985 for forest area (dry deciduous), 0.99 for shadow areas The calculated surface temperature values arc m the range of 10 to 32“ C and found to be in conformity with the climatological data over the region The study reveals the potential use of NDVI as a modulating parameter in the land surface temperature estimation from satellite data.Keywords : Satellite data, Emissivity, Surface temperature PACS Nos. 95 75. Mn, 95 75. Rs, 95 75. PqThe physical surface temperature is important because it is one of the key factors determining the exchange of energy and matter between the Earth’s surface and the atmosphere. It is therefore an important measurement in energy-balance applications and can be especially useful when determined by thermal infrared (TIR) remote sensing 11,2]. The radiation emitted from a surface at a given wavelength in the thermal infrared (8-14 pm) is a function of its temperature and emissivity. Satellite data acts as an effective tool in evaluation of such measurements at local, regional or global basis. In the direct estimation of surface temperature from satellite data, the main limitation has been on measuring the variable emissivity (which is defined as the ratio of the emitted radiation at a given temperature to the blackbody radiation at the same temperature) of the land surface. For heterogeneous areas where the vegetation cover may vary in proportion, the problem of estimating emissivity from satellite creates problem.©19991ACS726 Yogesh Kant and K V S BadarinathTherefore, the use of an operational and mathematically simple model in such studies is of paramount importance. There is need for some methodology to estimate surface emissi vity for partial vegetation cover on a pixel scale through satellite data. In an attempt to solve this, a vegetation sensitive index such as NDVI may be used to estimate emissivity at pixel level. In the present study, NDVI has been taken as a vegetation parameter to find surface emissivity and using it in inverse Planck’s law to estimate surface temperature.Landsat TM data of 19th December 1995 (Figure 1) with path/row 142/48 of parts of East Godavari district in digital form has been used in the present study for estimation of emissivity and the corresponding thermal band (Figure 2) for the generation of surface temperature.The present method is based on the methodology suggested by Valor & Caselles, 1996. The assumptions considered in the model are [3] :(i) assuming that the ground surface is a heterogeneous as much in temperature as in emissivity and rough system.(ii) not considering the shadow influence(iii) neglecting double scattering process between the different parts of the heterogeneous and rough system, which is equivalent to making an error of about 0.1 °C.(iv) assuming the surface to be flat.Several vegetation indices can be used to enhance spectral vegetation characteristics from the visible and near-infrared regions of the electromagnetic spectrum [4,5]. NDVI is the most commonly used vegetation index and is given as [5, 6].NDVI = (p2 - p , ) / ( p 2 + p , )  (1)where, p2 and p, are reflectance measured in NIR and red wavelength hand.Landsat Thematic Mapper (TM) provides 30 m spatial resolution data in six spectral bands in 0.45 -  2.35 |im and 120 m spatial resolution data in 10.4 -  12.5 (im thermal 1R band.A mixed pixel is assumed to be equal to size of the IFOV of TM which is partially occupied by a vegetation cover Py and rest by a soil proportion ( 1-Pr). Then for such a pixel the NDVI value as a first approximation is given as/ = ivPv + i*(l-P v), (2)where ty and ^ are respectively the NDVI values of pure vegetation and soil pixels. A mixed pixel reflectance isPn Pnv Pv Png ^ ~ ) » (3)where n = 1 for red and n = 2 for near IR.Substituting eq. (3) in to eq. (1), the NDVI of mixed surface becomesi - [ f t ( P 2v -  Pw )+  (1 "  f t ) ( P 2* ~ Pn  )]/ [ f t ( P 2v + Piv) + (I -  f t  XP2* + P i , )] • (4)Determination of surface temperature etcPlate IFigure 3. Classified image of study area showing different land use/land cover categories.Determination o f  surface temperature etc Thus a better way to relate the NDVI to the vegetation cover is727i - i vPv + iK(\ -  Pv) + d i , (5)where di is the correcting factor obtained by subtracting eq. (2) from eq. (4).The NDVI values of pure vegetation and bare soil pixels obtained from the reflectances in red and NIR channels are utilized for calculating proportion of vegetation cover using the relation [7]Pv = (1- ! ' / / „) / [ ( I - / / /v)], (6)£ = (P2i Piv)! (Ply• *“ P\f>), where p2v, p h are reflectances in red and NIR region for purevegetation pixels respectively. p2^  , p ^ are respectively the rellectances in NIR and red region for pure soil pixels. The radiance at the sensor level is the average radiance of the component classes in a pixel and in Landsat TM with 30m spatial resolution, the problem of mixed pixels is minimum.Finally, the relationship between emissivity and NDVI of a given surface is (7]e = a i  + b (7)where a = (£v -£ „ )/(« „ -» * ) and /? = [ex(;„ + d i ) - ? v(iK + /)]/(/, +if,) + Ae .For a given area the ‘a’ coefficient is constant, while coefficient V  changes from pixel to pixel with the vegetation cover (which produces the variation of the di term) and With the surface structure (which produces the variation of de term).The error in emissivity per pixel is given as 17]Ae = 4  < d e > P v{ \ -  Pv) , (8)where <de> is mean weighted value taking into account the different vegetation in the area, their struct .re and their proportions in it. The maximum value of de is given by <de> and with a separation between boxes varying with P ..In order to determine the surface temperature, the digital number of thermal channel (B6) have been converted into radiance values using the relationLx = a D N  + l3, (9)where a =  gain, /3= offset values 18].Surface temperature values per pixel have been calculated by using inverse Planck’s equation.Ts = C2 /Aln[(eC,A-5 / nLk) + 1], (10)where C, = 3.742 x 1 O''6 W m2, C2 = 0.0144 mK. A = wavelength in m, e= emissivity LK -  spectral radiance.In the present study. Rampa Revenue division of East Godavari district- Andhra Pradesh728 Yogesh Kant and K V S  Badarinathhas been taken for determining cmissivity and surface temperature. The major land use/land cover classes include built-up areas, plantations of teak and pine, crop lands, water bodies and forests which are predominantly of dry deciduous type. The general elevation of the district varies from 300 to 1500 m and has a coastline of 144 kms. The major soil types include alluvial, red soils, sandy loams and sandy clays.Surface temperature estimation requires information on surface cmissivity at pixel level. The determination of emissivity by means of the present methodology requires the use of satellite data together with some emissivity values of vegetation types from literature, which are necessary in order to map the effective surface emissivity. In the absence of emissivity values over the area, the mean value of 0.914 for bare soils and 0.986 for vegetation emissivity in 8-14 Jim region has been taken [9]. In the calculation of mean weighted value of the study area taken, three main vegetation structures have been considered in 8-14 |im region. The Maximum likelihood classified image of the study area depicting the land use/land cover is shown in Figure 3. The different features like forest, podu areas, scrub land were identified from the image and the corresponding cmissivity values have been taken from literature for calculating <de>, which has been estimated as 0.015. The error in emissivity values for each pixel has been calculated using eq. (8) by considering the proportion of vegetation cover in that pixel. The estimation of proportion of vegetation cover is done from NDVI which needs reflectances of pure pixels of vegetation and bare soils in NIR and red channels. The maximum and minimum NDVI values obtained from the existing image is 0.60 and 0.11 respectively. The values ol proportion vegetation cover has been found maximum over the forest area and minimum over shadow area. Emissivity map generated from TM data is shown in Figure 4. Since the satellite data corresponds to December month, which is typically winter season in the region, most of the areas are having moist conditions leading to slightly higher cmissivity values compared with dry conditions. However, for validation of surface emissivity and surface temperature extensive field survey has to be undertaken using infrared thermometer. In the absence, the validation for emissivity is done by comparing the derived values with the already literature suggested values over certain features and for surface temperature the values have been compared with the climatological data of the area. The emissivity values derived from the present method have been compared with the literature values in the 8-14 Jim over certain known features |7] and are found to be in reasonable agreement with an error of less than 1 %. The average surface temperature estimated from cq. (10) is shown in Figure 5. The surface temperature observed to be in the range of 10 to 32°C with minimum over shady areas. The derived surface temperature values have also been compared with the soil temperature (27.2" C) over the region obtained from Indian Meteorological Department corresponding to satellite date of pass. The surface temperature obtained from the methodology over scrubs areas are found to be in the range of 29-32°C. Thus satellite derived surface temperature values are found to be in reasonable agreement over the region. The difference between the surface temperature and air temperature i.e., (T -TJ  during the afternoon satellite overpass is much greater for the semi-arid region -  10 to 30°C, than for the vegetated region ~ 0 to 5° C [ 10], The methodology adopted in the present study suggests that NDVI would be used as a modulating parameter for estimating surface emissivity and surface temperature.The results of the study indicates that over heterogeneous areas, estimation of surface emissivity in feasible by taking the percentage vegetation cover of each pixel into account. The surface temperature estimated from the knowledge of emissivity of each pixel has been found to be in good agreement with observed values in the region. The error in the emissivity valuesDetermination of surface temperature etcPlate IIFigure  4. Emissivity image of study area generated from proportion of vegetation cover and NDVIFigure 5. Surface temperature image generated from emissivity and thermal band.729calculated from satellite data per pixel may be due to error in standard emissivity values taken lor the vegetation features in the term 7/f over the study area and the lack of knowledge of atmospheric conditions. The knowledge of correct value of emissivity values could lead to less error. The information obtained from the retrieval of emissivity directly from spectral measurements in visible and infra red bands ol satellite data could be used to estimate land surface temperature at regional scale using thermal IR data.AcknowledgmentsThe authors express their sincere gratitude to Dr. D. P. Rao, Director, N.R.S.A. for constant encouragement during the course of the study. Yogesh Kant expresses his gratitude to ISRO- GBP for awarding Fellowship to carry out the study. The authors arc grateful to IMD, Pune for the help in providing meteorological data.R e f e r e n c e s[ 1 ] J C Price Water Resources Research 16 787 (1980)12J B Seguin and B ltier hit J Remote Sensing 4 371 (1983)[31 V Caselles and J A Sohnno Remote Sensing of Envuonment. Vol 29 p 135 (1989)141 J W Rouse, R H Haas, J A Schell, D W Deenng and J C Harlan NASA/GSFC Type-111. Final Report. (Grecnhelt, MD) (1974)| S] R J Kauth and G S Thomas Pio(eeeding\ of the 2ml Symposium on Mat fane Processing of Remote Sensed Data (1976)[6] C J Tucker Remote Sensing of hnvuonment Vol 8 p 127 (1979)[7] E Valor and V Caselles Remote Sensing of Environment Vol 57 pi67 (1996)[81 B L Markham and J L Barker Landsat Usei Notes. EOSA'l (Lanharn, MD) (1986)[9] W H Carnahan and R C Larson Remote Sensing of Environment Vol 33 p 65 (1990)[10) L L Stowe, C G Wcllemeyer, T F Eek, HYM  Yeh J Climate! p 44S (1988)Determination of surface temperature etc

Determination of Surface Temperature Over Partially Vegetated Heterogeneous Areas Using Satellite Data

http://arxiv.iacs.res.in:8080/jspui/bitstream/10821/5765/1/Determination%20of%20Surface%20Temperature%20Over_By%20Yogesh%20Kant.pdf

Determination of Surface Temperature Over Partially Vegetated Heterogeneous Areas Using Satellite Data

Abstract

Similar works

Full text

Available Versions

IACS Institutional Repository