Hilton, Geoffrey S

Lewis, R

Mellios, Evangelos

Pelham, Timothy G

Railton, Christopher J

A comparison of Finite Difference Time Domain (FDTD) methods, for conformal antenna array modelling. This study includes the measurement of Dual Feed Dual Circular Patch Antenna elements mounted in the Variable Geometry ConformalAntenna Array Test Rig. These measurements together with predictions from the Bristol FDTD Model, allows a comparison of antenna array measurements with model predictions over a range of conformal curvatures, with an aim to reducing technical risks in conformal antenna array design

Explore Bristol Research

                          Pelham, T. G., Hilton, G. S., Mellios, E., Railton, C. J., & Lewis, R. (2016).Conformal Antenna Array Modelling, FDTD Predictions and Measurementsfor Dual Circular Patch in Variable Geometry Conformal Antenna Array TestRig. In 2016 10th European Conference on Antennas and Propagation(EuCAP 2016) : Proceedings of a meeting held 10-15 April 2016 at Davos,Switzerland. [7481683] Institute of Electrical and Electronics Engineers(IEEE). DOI: 10.1109/EuCAP.2016.7481683Peer reviewed versionLink to published version (if available):10.1109/EuCAP.2016.7481683Link to publication record in Explore Bristol ResearchPDF-documentThis is the author accepted manuscript (AAM). The final published version (version of record) is available onlinevia IEEE at http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7481683. Please refer to any applicableterms of use of the publisher.University of Bristol - Explore Bristol ResearchGeneral rightsThis document is made available in accordance with publisher policies. Please cite only the publishedversion using the reference above. Full terms of use are available:http://www.bristol.ac.uk/pure/about/ebr-terms.htmlConformal Antenna Array Modelling, FDTDPredictions and Measurements for Dual CircularPatch in Variable Geometry Conformal AntennaArray Test RigT.G. Pelham1, G. Hilton2, E. Mellios2, C. Railton2 R. Lewis31Centre for Doctoral Training in Communications, University of Bristol, Bristol, UK2Department of Electrical Engineering, University of Bristol, Bristol, UK3BAE Systems, Advanced Technology Center, Great Baddow, UKAbstract—A comparison of Finite Difference Time Domain(FDTD) methods, for conformal antenna array modelling. Thisstudy includes the measurement of Dual Feed Dual CircularPatch Antenna elements mounted in the Variable Geometry Con-formal Antenna Array Test Rig. These measurements togetherwith predictions from the Bristol FDTD Model, allows a com-parison of antenna array measurements with model predictionsover a range of conformal curvatures, with an aim to reducingtechnical risks in conformal antenna array design.Index Terms—antenna, propagation, FDTD,, Circular Patch,measurement.I. INTRODUCTIONPhased Antenna Arrays have a wide range of applications,aerospace & defence, communications, and medical imaging.Conformal Antenna Arrays in particular support the samewide range of applications while reducing the requirementson the supporting structure. In the aerospace sector ConformalAntenna Arrays may be chosen to eliminate the drag from theradome required for a planar antenna array or mechanicallysteered reflector [2], while in the communications sector, aconformal array capable of wide angle beam steering wouldallow a low profile Base Station installation on the corner of abuilding. A low cost, modular conformal antenna array designcould provide greater functionality in these environments, alarger coverage area and multiple beams for high throughputcommunications standards such as the emerging 5G standard.While in the aerospace combined sensors and communicationsarena, a low cost conformal antenna array would offer anenlarged field of regard and reduced airframe drag.However, the conventional design process for a conformalantenna array is to specify a planar antenna array of approxi-mately the right specifications, and then to warp the aperture tofit the conformance required. This method involves increasedtechnical risk, as the qualitative design decisions requiredcan promote repeated design reviews to ensure that the arraymeets is performance specifications. This study proposes thatgiven the development of sophisticated Finite Difference TimeDomain (FDTD) modelling tools, it is now possible to design aFig. 1. Dual Patch Element in Variable Geometry Test Rigconformal array directly for a set of requirements, based on thesurface geometry available. Dependant upon the frequency andgeometry of interest the difference between a true ‘conformal’array of conformal antenna elements such as presented by Liuet al [3], and Schippers et al [2], and a conformal array ofmodular ‘facets’ may become increasingly irrelevant.II. VARIABLE GEOMETRY CONFORMAL ARRAY TEST RIGA. Variable Geometry Conformal Antenna Array Test RigThe Variable Geometry Conformal Array Test Rig (Figure2), was designed to allow consistent testing of a range ofantenna elements at a range of inter-element angles, whilemaintaining a consistent inter-element spacing.The Test Rig was used in combination with the Dual PatchElements, and the Cavity Slot Elements [1], to investigate theFDTD methodology, and with these results, give confidenceto the investigation of the expanded range of ConformalAntenna Arrays, chosen to contrast the properties of thedifferent antenna types in a conformal array, currently awaitingpublication.Fig. 2. Dual Patch Antenna Elements, rendered transparently to show internaldetailB. Dual Feed Dual Circular Patch ElementsThe Dual Patch antenna element shown in Figure 2, consistsof a driven element, a circular patch mounted on a copperbacked substrate, and separated by an insulator a parasiticcircular patch, of slightly reduced diameter. This stacked plateconstruction provides a higher directivity than might otherwisebe obtained from a conventional patch. The driven elementis fed by two coaxial feeds, separated by 90 degrees, andproviding the dual polarisation functionality. These modularantenna elements were initially presented in a fixed 17 elementfaceted conformal array by Railton et al [4], and have nowbeen re-purposed for use in the Variable Geometry ConformalAntenna Array Test Rig. The Dual Patch Antenna can beenclosed within a volume with a radius a, ka = 4.08. Forclarity the feeds for each element are refereed to via dominantpolarisation and element number, e.g. 3V (Element 3, VerticalFeed).III. SIMULATION AND MEASUREMENT SETUPIn an effort to isolate the far field response of each elementfrom the chamber rotator mount, a large shielding groundplane was placed behind the Variable Geometry Test Rig, asshown in Figure 1, and the modelled environment was limitedto the extent of this ground plane.A. Bristol FDTD ModelBristol FDTD is an EM solver used within the university ofBristol for applications from Optics [6], to Medical Imaging[7]. Based upon the work by Yee et al [5] the model includes avariable FDTD mesh, which allows snapping of mesh lines tomaterial boundaries for a more accurate model. In additionthis program supports rotation of Time Domain Huygenssnapshots, sources, and port templates. which is exploited toimprove the computational efficiency of the model using athree stage modelling process [8].IV. ARRAY PATTERNS AND S PARAMETERSA. Array PatternWhen the array is operated in the Horizontal mode, thereis overall a good agreement between the array antenna patternmeasurements and model predictions, as can be seen in Fig 4,and 6 for the Planar antenna array, and in the polar φ = 0 cutin Fig 13. The Vertical mode however shows less agreement,Fig. 3. Measured Planar Arraypattern in Vertical ModeFig. 4. Measured Planar Arraypattern in Horizontal ModeFig. 5. Modelled Planar Arraypattern in Vertical ModeFig. 6. Modelled Planar Arraypattern in Horizontal Modethe same general array function can be observed, but there isa pronounced beam squint towards φ = −90. Thie effects ofthis are readily visible when comparing the planar 3D polarplots in Fig 3, and 5, and also by observation of the reducedmain beam gain in Fig 13.As the radius of curvature is reduced the normalised patternsshow the expected trend for a conformal aperture of this typewith a reduction in main beam gain, while the pronouncedbeam squint predicted by the FDTD model results in continuedlow main beam gain in the θ = 0 direction for the FDTDmodel Vertical mode pattern. Based upon the inter-elementcoupling, and the comparisons between the measured andmodel data, the origin of the squint can be clearly linkedto the difference in the mutual coupling which is greatestfor Vertical-Vertical cross coupling, as might be expectedfor parallel excitation modes. This effect is reduced with thereduction in the radius of the conformal surface.B. Inter-Element CouplingTo give an accurate understanding of the relationship be-tween the measurements and the EM model predictions, astatistical basis is required for comparison of such a large dataset. Each array angle set measured comprises 100 couplingmeasures, for a total of 600 S parameters from 1 to 9 GHz. Abrief sample has been included here as Figures 7,8,9,10,11,12.But to give a true comparison a statistical measure of sim-ilarity is required. To this end normalised Kullback-Leiblerdivergence has been employed from information theory asthe logarithmic distance between two variables P and Q, asshown in Equation 1, [9]. This measure when normalisedover the datasets of interest gives a comparative measure ofthe difference from zero to one. Zero representing identicaldatasets, and one representing the maximum logarithmic dis-tance calculated. The results of this analysis over the threeFig. 7. Central Element Copolar and Cross Polar Response for Planar ArrayFig. 8. Intra-Element Coupling for Planar ArrayVariable Geometry Array Test Rig Angle Sets examined areshown in Table I.While the results are normalised relative to the largestKullback-Leibler Divergence, there is a slight trend of in-creasing divergence as the inter-element angle is increased.However, when the S11 for each element is examined inisolation there is very little variation between angle sets. Itis also clear from the measurements that for these modularantennas, there is little variation in the S11 as the conformalsurface geometry changes.DKL(P ||Q) =∑iP (i)logP (i)Q(i)(1)Fig. 9. Central Element Copolar and Cross Polar Response for ConformalArray with 5 degree inter element angleFig. 10. Intra-Element Coupling for Conformal Array with 5 degree interelement angleFig. 11. Central Element Copolar and Cross Polar Response for ConformalArray with 10 degree inter element angleFig. 12. Intra-Element Coupling for Conformal Array with 10 degree interelement angleFig. 13. Polar Plot of normalised Array Directivity for the Planar ArrayFig. 14. Polar Plot of normalised Array Directivity for Conformal Arraywith 5 degree inter element angleFig. 15. Polar Plot of normalised Array Directivity for Conformal Arraywith 10 degree inter element angleInter-Element Angle 0d 5d 10dBristol FDTD 0.3953 0.4775 0.4991TABLE IMEAN NORMALISED KULLBACK-LEIBLER DIVERGENCE FOR ALL SPARAMETERSInter-Element Angle 0d 5d 10dBristol FDTD 0.0712 0.0728 0.0629TABLE IIMEAN NORMALISED KULLBACK-LEIBLER DIVERGENCE FOR SELFRESONANCE S PARAMETERSV. CONCLUSIONWhen designing conformal antenna arrays, the variation inantenna element S parameters as the elements are warped tofit the surface geometry required introduces a great deal ofuncertainty. One consequence of this research is to proposethat unless the wavelength of interest is large compared tothe radius of curvature required, it is highly advantageous toemploy a modular antenna element design philosophy, usinga faceted conformal array. The low variation observed in theS parameters of the Dual Patch antenna array for differentinter-element angles supports this.However, the FDTD model, while producing good agree-ment in the Horizontal mode, predicted higher levels of cross-coupling than measured for this array, and this had an obviouseffect on the antenna array pattern results. It is thought thatthis may be due to the lossless nature of the model used forthis study, that perhaps the introduction of appropriate losstangents for the materials used would yield increased fidelity.REFERENCES[1] T. Pelham, G. Hilton, R. Lewis, and C. Railton, “Variable geometry con-formal antenna array for element comparison,” in Vehicular TechnologyConference (VTC Spring), 2015 IEEE 81st, May 2015, pp. 1–5.[2] H. Schippers, J. Verpoorte, P. Jorna, A. Hulzinga, A. Meijerink, C. Roelof-fzen, R. Heideman, A. Leinse, and M. Wintels, “Conformal phasedarray with beam forming for airborne satellite communication,” in SmartAntennas, 2008. WSA 2008. International ITG Workshop on, Feb 2008,pp. 343–350.[3] M. Liu, Q. Wu, and Z.-R. Feng, “A millimeter-wave 4x4 conical con-formal and dual-band microstrip array,” in Microwave Conference, 2008.APMC 2008. Asia-Pacific, Dec 2008, pp. 1–4.[4] C. Railton, D. Paul, and I. Craddock, “Analysis of a 17 element con-formal array of stacked circular patch elements using an enhanced fdtdapproach,” Microwaves, Antennas and Propagation, IEE Proceedings,vol. 150, no. 3, pp. 153–158, June 2003.[5] K. Yee, “Numerical solution of initial boundary value problems involvingmaxwell’s equations in isotropic media,” Antennas and Propagation,IEEE Transactions on, vol. 14, no. 3, pp. 302–307, May 1966.[6] J. Rarity, Y.-L. Ho, R. Gibson, C. Hu, M. Cryan, I. Craddock, C. Railton,D. Sanvitto, A. Darei, M. Hopkinson, J. Timpson, A. Fox, and M. Skol-nick, “Experiments versus modelling in quantum dot pillar microcavities,”in Transparent Optical Networks, 2006 International Conference on,vol. 1, June 2006, pp. 67–70.[7] C. Christodoulou, C. J. Railton, M. Klemm, D. Gibbins, and I. J.Craddock, “Analysis of a uwb hemispherical antenna array in fdtd witha time domain huygens method,” Antennas and Propagation, IEEETransactions on, vol. 60, no. 11, pp. 5251–5258, Nov 2012.[8] T. G. Pelham, G. Hilton, C. Railton, and R. Lewis, “Fdtd modelperformance analysis for a cavity slot antenna array in a variable geometryconformal test rig,” in Antennas and Propagation USNC/URSI NationalRadio Science Meeting, 2015 IEEE International Symposium on, July2015, pp. 1836–1837.[9] S. Kullback and R. A. Leibler, “On information and sufficiency,” Ann.Math. Statist., vol. 22, no. 1, pp. 79–86, 03 1951. [Online]. Available:http://dx.doi.org/10.1214/aoms/1177729694

Conformal Antenna Array Modelling, FDTD Predictions and Measurements for Dual Circular Patch in Variable Geometry Conformal Antenna Array Test Rig

T.G. Pelham

G. Hilton

E. Mellios

C. Railton

R. Lewis

Crossref

Conformal antenna array modelling, FDTD predictions and measurements for Dual Circular Patch in Variable Geometry Conformal Antenna Array Test Rig

https://research-information.bristol.ac.uk/files/67057218/Timothy_Pelham_Conformal_Antenna_Array_Modelling.pdf

Conformal Antenna Array Modelling, FDTD Predictions and Measurements for Dual Circular Patch in Variable Geometry Conformal Antenna Array Test Rig

Abstract

Similar works

Full text

Available Versions

Explore Bristol Research

Crossref