In this study, equal channel angular pressing (ECAP) was exploited to refine the grain size of a ZK60 magnesium alloy in multi-processing steps, namely at temperatures of 250˚C, 200˚C and 150˚C, producing an ultrafine-grained (UFG) structure. The microstructural development and texture evolution during ECAP were systemically investigated by electron backscattered diffraction (EBSD) analysis. The microstructure of the ECAP processed alloy was remarkably refined to an average grain size of 600 nm. During ECAP process the original fiber texture of the as-extruded alloy was gradually weakened and eventually replaced by a stronger texture component coinciding with ECAP shear plane. The ECAP processed material showed a proper balance of tensile as well as compression strength and tensile ductility at room temperature. Yield strength of 273 and 253 MPa in tension and compression, respectively, ultimate tensile strength of 298 MPa and fracture elongation of about 30% were obtained in the UFG alloy. A transition from ductile–brittle to ductile fracture consisting of very fine and equiaxed dimples was also found in the ECAP processed material. Compared to the as-received alloy, a combination of grain refinement and texture development in the UFG alloy gave rise to a notable reduction in mechanical asymmetric behavior at room temperature. The superplastic behavior of the as-extruded and ECAP processed alloy was also investigated at 200˚C with strain rate of 1.0×10-3 s-1.
The concurrent effect of grain boundary sliding and favorable basal texture in the UFG alloy led to an achievement of elongation value of about 300% while, under similar testing conditions, the elongation of about 140% was obtained in the as-extruded alloy