Tin Oxide Electron Transport Layers for Air-/Solution-Processed Conventional Organic Solar Cells

Abstract

Commercialization of organic solar cells (OSC) is imminent. Interlayers between the photoactive film and the electrodes are critical for high device efficiency and stability. Here, the applicability of SnO2 nanoparticles (SnO2 NPs) as the electron transport layer (ETL) in conventional OSCs is evaluated. A commercial SnO2 NPs solution in butanol is mixed with ethanol (EtOH) as a processing co-solvent to improve film formation for spin and slot-die coating deposition procedures. When processed with 200% v/v EtOH, the SnO2 NPs film presents uniform film quality and low photoactive layer degradation. The optimized SnO2 NPs ink is coated, in air, on top of two polymer:fullerene-based systems and a nonfullerene system, to form an efficient ETL film. In every case, addition of SnO2 NPs film significantly enhances photovoltaic performance, from 3.4 and 3.7% without the ETL to 6.0 and 5.7% when coated on top of PBDB-T:PC61BM and PPDT2FBT:PC61BM, respectively, and from 3.7 to 7.1% when applied on top of the PTQ10:IDIC system. Flexible, all slot-die-coated devices, in air, are also fabricated and tested, demonstrating the versatility of the SnO2 NPs ink for efficient ETL formation on top of organic photoactive layers, processed under ambient condition, ideal for practical large-scale production of OSCs