Stabilizing the Nanosurface of LiNiO₂ Electrodes by Varying the Electrolyte Concentration: Correlation with Initial Electrochemical Behaviors for Use in Aqueous Li-Ion Batteries

Abstract

This study attempted to stabilize the nanosurface of LiNiO2 (LNO) electrodes by varying the electrolyte concentration, significantly influencing its initial electrochemical behaviors for use in aqueous lithium-ion batteries. The charge/discharge capacities, reversibility, and cyclability of LNO were improved during initial cycles with an increase in the concentration of lithium bis­(trifluoromethanesulfonyl)­imide (LiTFSI). As determined by the galvanostatic intermittent titration technique, the superior diffusivity of Li+ ions in the LNO electrode is also obtained in the concentrated electrolyte. Nanoscale observation of the LNO surface revealed that its morphology is maintained relatively well in the concentrated electrolyte while it is destroyed in dilute electrolytes after the initial electrochemical cycles. These results are considered to be attributable to the variation of the interface condition in the electrical double layer with an increase in the electrolyte concentration, thus stabilizing the nanosurface of LNO by suppressing the dissolution of Ni ions from the surface. Additionally, in situ X-ray diffraction analysis demonstrated that LNO shows more stable phase transitions and volume changes as the electrolyte concentration increases, indicating that its structural changes in bulk can be directly related to the state of the nanosurface, which has a positive impact on the initial electrochemical behaviors in this system