Signal amplification and noise reduction are crucial for
obtaining low detection limits in biosensors. Here, we
present an electrochemical immunosensor in which the
signal amplification is achieved using p-aminophenol (AP)
redox cycling by hydrazine, and the noise level is reduced
by implementing a low background current. The redox
cycling is obtained in a simple one-electrode, one-enzyme
format. In a sandwich-type heterogeneous immunosensor
for mouse IgG, an alkaline phosphatase label converts
p-aminophenyl phosphate into AP for 10 min. This
generated AP is electrooxidized at an indium tin oxide
(ITO) electrode modified with a partially ferrocenyl-tethered dendrimer (Fc-D). The oxidized product, p-quinone imine (QI), is reduced back to AP by hydrazine,
and then AP is electrooxidized again to QI, resulting in
redox cycling. Moreover, hydrazine protects AP from
oxidation by air, enabling long incubation times. The small
amount of ferrocene in a 0.5% Fc-D-modified ITO electrode, where 0.5% represents the ratio of ferrocene groups
to dendrimer amines, results in a low background current,
and this electrode exhibits high electron-mediating activity
for AP oxidation. Moreover, there is insignificant hydrazine electrooxidation on this electrode, which also results
in a low background current. The detection limit of the
immunosensor using a 0.5% Fc-D-modified electrode is
2 orders of magnitude lower than that of a 20% Fc-D-modified electrode (10 pg/mL vs 1 ng/mL). Furthermore,
the presence of hydrazine reduces the detection limit by
an additional 2 orders of magnitude (100 fg/mL vs 10
pg/mL). These results indicate that the occurrence of
redox cycling combined with a low background current
yields an electrochemical immunosensor with a very low
detection limit (100 fg/mL). Mouse IgG could be detected
at concentrations ranging from 100 fg/mL to 100 μg/mL
(i.e., 9 orders of magnitude) in a single assay