The presented sampled-current memory cell demonstrates class AB operation where the bipolar input current magnitude may exceed twice the quiescent bias current even though full cascode regulation is maintained. Calculation of the necessary safety margin to accommodate process tolerances is shown to be simplified compared with the standard regulated cascode cell

Bratt, Adrian

Dorey, A. P.

Olbrich, T.

English

Lancaster E-Prints

0 IEE 1994 Electronics Letters Online No: 19941242 N. Tan, B. Jonsson and S. Eriksson (Dept. of Electrical Engineering, Linkoping University, S-581 82 Linkoping. Sweden) 19 August I994 References 1 CANDY, J.c., and TEMES. G.C. (Ed.): ‘Oversampling delta-signma data converters: Theory, design and simulation’ (IEEE Press, 1992) 2 TOUMAZOU, c., HUGHES, J.B., and BAITERSBY, N.C. (Ed.): ‘Switched- currents: an analogue technique for digital technology’ (Peter Peregrinus Ltd., 1993) 3 DAUBERT. s.J., and VALLANCOURT, D.: ‘A transistor-only current- mode L A  modulator’, IEEE J. Solid-State Circuits, 1992, SC-27, pp. 821-830 4 CRAWLEY. P.J., and ROBERTS, G.w.: ‘Switched-current sigma-delta modulation for AID conversion’. Proc. IEEE Int. Symp. on Circuits and Systems, May 1992, pp. 132lL1323 5 TOUMAZOU. c., and SAETHER, G.: ‘Switched-current circuits and systems’. Proc. IEEE Int. Symp. on Circuits and Systems, May 1994, Vol. Tutorials, pp. 459486 6 TAN. N., and ERIKSSON. s.: ‘A fully differential switched-current delta-sigma modulator using a single 3.3-V power-supply voltage’. Proc. IEEE Int. Symp. on Circuits and Systems, May 1994, Vol. 5,  pp. 48S588 7 BOSER. B.E., and WOOLEY. B.A.: ‘The design of sigma-delta modulation analog-to-digital converters’, IEEE J.  Solid-State Circuits, 1988, SC-23, pp. 1298-1308 SINK P.M., and ROBERTS, G.W.: ‘A comparison of first and second generation switched-current cells’. Proc. IEEE Int. Symp. Circuits and Systems, May 1994, Vol. 5,  pp. 301-304 9 JONSSDN. B., and ERIKSSON, s.: ‘A new clock-feedthrough compensation scheme for switched-current circuits’, Electron. Lett., 1993. 29, pp. 1446-1447 8 Class AB regulated cascode current memory cell A.H. Bratt, T. Olbrich and A.P. Dorey Indering terms: Switched-current circuits. Memories The regulated cascode cell [5] shown in Fig. 2 has been used as a memory cell and offers a large output resistance of approxi- mately Sm2Smr (1) gds i  g d s z g d s s  which is typically lOGR if all the transistors operate in saturation mode. P1 MI C a -  U b (0 Fig. 1 Early current memory cells The presented sampled-current memory cell demonstrates class AB operation where the bipolar input current magnitude may exceed twice the quiescent bias current even though full cascode regulation is maintained. Calculation of the necessary safety margin to accommodate process tolerances is shown to be simplified compared with the standard regulated cascode cell. C pldMz Introduction: Switched current (SI) signal processing has recently come of age and several interesting designs have emerged for both the basic building blocks [ I ]  and more complex designs [2]. The growth of SI techniques looks set to increase still further because the technological requirements are modest [3], requiring only a sin- gle polysilicon layer, and are thus ideally suited to producing ana- logue circuits on the periphery of digital core chips. Fundamental to almost any SI design is the memory cell, a number of which are shown in Fig. I .  The simple cell shown in Fig. l a  suffers badly from channel length modulation 141 which gives a poor output impedance of approximately l/ga (typically The cascoded cell of Fig. Ib improves the output resistance by approximately a factor of IO0 but the penalty paid is that the min- imum voltage at  the 110 node is at  least two threshold voltages plus the body effect of transistor M2, approximately 2.2V in total for nFET threshold voltages of 0.9V. Fig. 2 Regulated casrode current memory cell To obtain a sufficient voltage range at  the i/o node it is neces- sary to run M3 in the linear region of operation so that its drain- source voltage may be reduced to around 0.5 V. Under all input conditions and full process tolerance, the range of allowable aspect ratios for M I  is given by the following two equations: I M A X  ~~-sLoi~~((vmh,Ax-  ) - J ’ D s / ~ ) ~ D s ~ . , ~  500kR for a drain current of 1OOpA). .AMIN > ( 2 )  and I M I N  A M A X  < The final circuit of Fig. 1 shows an opamp regulated memory KF AST ( ( VGS.wrh~ - ~ ’ T F ,  5~ ) v D S / 2 )  T.bS,w cell. This circuit looks superficially attractive but contains a number of problems which make its implementation unattractive. where the symbols have their usual meanings, I,,,,,v,,,, is the input Assuring stability of the opamp leads to a bandwidth for the current plus the bias current, A is the aspect ratio (W/L)  of M1 whole circuit very much less than that for either of the two previ- and VDs,, is assumed to be constant. These bounding functions ous circuits. The additional complexity is also problematic for cir- are clearly a function of both fast and slow process parameters cuits with a large number of memory cells. which tends to  lead to extreme values of A,,N and A,,, especially ELECTRONICS LE77ERS 27th October 7994 Vol. 30 No. 22 1821 (3) Authorized licensed use limited to: Lancaster University Library. Downloaded on December 5, 2008 at 09:40 from IEEE Xplore.  Restrictions apply.on a digital process not optimised for high precision analogue work. Slow Typical Fast Fig. 3 Class AB current memory re/ /  100.0002 99.9987 16.0 100.0013 99.9985 15.1 100.0027 99.9941 13.5 Class A B  current-memory cell: The push-pull regulated cascode cell shown in Fig. 3 allows alteration of the bias current produced by the upper regulated cascode. It has the very desirable feature that as the current through M1 increases, the bias current supplied by M4 decreases. The input current range is therefore increased to the extent that class AB operation is easily possible. The current provided by the upper and lower regulated cells is given approximately by I P  = 1I.w41 = ~ P ~ ~ ~ ( ( ~ . , s P - ~ , P ) - ~ ’ D S P / ~ ) ~ D S P  (41 1.v = I J r l  = ~ - ~ A N ( ( E ~ S , ~ - ~ . ~ . . ~ ) - ~ D S ~ / ~ ) I / D S . ~  (5) and their difference is the input or output current. Assuming that K p A p  = K,A,.,, = VrJ. VDsp = V,, the difference between the currents may be written as AI = I p - 1 ~  Y I < 7 A ( 1 / G ~ p - v ~ ~ ~ ) b ’ ~ ~  (6) The quiescent bias current, I,, is the current through M ,  (or Ms) with zero inpuuoutput current to the cell as a whole and may be written as 10 = 1.v = IiA((lhS.vO-v,)-vDs.,,1/2)l.~snnl (7) where V,s,v, is the quiescent gate-source voltage of M1. Thus the total input current range is written as FET Process nMOS Slow Fast Typical Fast Typical PMOS Slow K V T  W V ‘  V 24 1 .o 35 0.x 48 0.6 9 1 .0 12 0.8 18 0.6 This represents a lower limit to the achievable input current range. With typical or fast process parameters the input current range is greater although I,  is also greater. One great advantage of this circuit is that input current range is defined almost solely by the slow parameter set. The aspect ratios of transistors M1 and M2 may be more accurately defined as a result, and the spread of aspect ratios necessary to accommodate process variations is reduced. Table 2 Input current range simulation results 1 Sl:; 1 94.5 1 201.1 1 -205.2 1 Typical 135.2 238.7 -224.7 111.6 216.4 -235.6 Performance: Table 2 shows the input current limits of the class AB regulated cascode cell in the limit that the IO node voltage is constrained to 1.5 < V,, < 3.5. Table 3 Sample and output simulation results References TOUMALOU, c., LIDGEY, F.J., and HAIGH, D.G.: ‘Analogue IC design: the current-mode approach’ (Peter Peregrinus, 1990), p. 224 BATTERSBY, N.c., and TOUMAZOU, c.: ‘A high frequency fifth order switched current bilinear elliptic lowpass filters’, IEEE J. Solid Slate Circuits,, SC-29, (6) ,  pp. 737-740 TOUMAZOU, c.. HUGHES, J.B., and BATTERSBY. N.c.: ‘Switched- currents: an analogue technique for digital technology’ (Peter Peregrinus, London, 1993), p. 577 ALLEN, P.E., and HOLBERC, D.R.: ‘CMOS analog circuit design’ (HRW, New York, 1987), p. 101 TOUMALOU, c., HUGHES, J.B., and PATTULLO. D.M.: ‘Regulated cascode switched-current memory cell’, IEEE J. Solid State Circuits,, 26, ( 5 ) ,  pp. 303-305 1822 ELECTRONICS LETTERS 27th October 1994 Vol. 30 No. 22 Authorized licensed use limited to: Lancaster University Library. Downloaded on December 5, 2008 at 09:40 from IEEE Xplore.  Restrictions apply.

Analogue IC design: the current-mode approach’ (Peter Peregrinus,

Class AB cascode current memory cell.

http://eprints.lancs.ac.uk/20516/1/20516.pdf

Class AB cascode current memory cell.

Abstract

Similar works

Full text

Available Versions

Lancaster E-Prints