Analysis of Satellite-to-Satellite Tracking (SST) and altimetry data from GEOS-C

Abstract

Radar altimetry and satellite-to-satellite (SST) range and range rate tracking measurements were used to infer the exterior gravitational field of the earth and the structure of the geoid from GEOS-C metric data. Under the SST analysis, a direct point-by-point estimate of gravity disturbance by means of a recursive filter with backward smoothing was attempted but had to be forsaken because of poor convergence. The adopted representation consists of a more or less uniform grid of discrete masses at a depth of approximately 400 km from the earth's surface. The layer is superimposed on a spherical harmonics model. The procedure for smoothing the altimetry and inferring the fine-structured gravity field over the Atlantic test area is described. The local disturbances are represented by means of a density layer. The altimeter height biases were first estimated by a least squares adjustment at orbital crossover points. After taking out the bias, long wavelength contributions from GEM-6 as well as a calibration correction were subtracted. The residual heights were then represented by a mass distribution beneath the earth's surface