The present study focuses on the numerical simulation of unsteady cavitating flow around a plane-convex hydrofoil with a semi-cylindrical obstacle, which is based on the cavitationerosion experiment perform at LMH-EPFL using the vortex cavitation generator tunnel. The turbulence model k-¿ SST SAS method, which presents advantages in terms of computational consumption and reproduction of the phenomenon, has been applied in OpenFOAM version 4 to reproduce the unsteady behavior of cavitating flow. Additionally, the Zwart-Gerber-Belamri (ZGB) cavitation model has been applied, based on a previous work where this model was implemented in OpenFOAM. The model is based on Rayleigh Plesset equation, which considers small cavities with changes of void fraction for condensation and vaporization and using empirical calibration numbers based on previous research. Regarding the mesh development, the present work explores two configurations of grid mesh containing hexahedra (hex) and split-hexahedra (split-hex) automatically generated from triangulated surface geometries based on previous numerical studies. The aforementioned method aims to optimize computational demand and phenomenon reproducibility. Results show that the unsteady cavitating flows behavior has been reproduced with good accuracy and shows special details which are important for erosion studies in futures works.Peer ReviewedPostprint (published version
