Bak, S. N.

Bentzen, Thomas Ruby

Jensen, J. C.

Madsen, S.

Rasmussen, Michael R.

Ratkovich, Nicolas Rios

English

    Aalborg UniversitetNumerical Modelling of Non-Newtonian Fluid in a Rotational Cross-Flow MBRBentzen, Thomas Ruby; Ratkovich, Nicolas Rios; Rasmussen, Michael R.; Madsen, S.;Jensen, J. C.; Bak, S. N.Publication date:2011Document VersionPublisher's PDF, also known as Version of recordLink to publication from Aalborg UniversityCitation for published version (APA):Bentzen, T. R., Ratkovich, N. R., Rasmussen, M. R., Madsen, S., Jensen, J. C., & Bak, S. N. (2011). NumericalModelling of Non-Newtonian Fluid in a Rotational Cross-Flow MBR. Poster presented at 6th IWA SpecialistConference on Membrane Technology for Water and Wastewater Treatment, Aachen, Germany.General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright ownersand it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.            ? Users may download and print one copy of any publication from the public portal for the purpose of private study or research.            ? You may not further distribute the material or use it for any profit-making activity or commercial gain            ? You may freely distribute the URL identifying the publication in the public portal ?Take down policyIf you believe that this document breaches copyright please contact us at vbn@aub.aau.dk providing details, and we will remove access tothe work immediately and investigate your claim.Downloaded from vbn.aau.dk on: November 29, 20206th IWA Specialist Conference on Membrane Technology - 4-7 October 2011, Aachen, GermanyNumerical modelling of non-Newtonian fluid in a rotational cross-flow MBRT. R. Bentzen1, N. Ratkovich1, M. R. Rasmussen1, S. Madsen2, J. C. Jensen2 and S. N. Bak21Aalborg University, Department of Civil Engineering, Sohngaardsholmsvej 57, DK-9000 Aalborg, Denmark. (E-mail: trb@civil.aau.dk; nr@civial.aau.dk; mr@civial.aau.dk)  2Grundfos BioBooster A/S, Poul Due Jensens Vej 7, DK-8850 Bjerringbro, Denmark.  (E-mail: steffenmadsen@grundfos.com; jecjensen@grundfos.com; snbak@grundfos.com)  Introduction & Objectives• Fouling is the main bottleneck of the widespread of MBR systems.• Process hydrodynamics can decrease and/or control fouling.• by increasing liquid cross-flow velocity.• Rotational cross-flow (RCF) MBR (Grundfos BioBooster®) (Fig. 1)• Rotating impellers between filtration and aeration membrane discs preventfouling.• It operates up to 5 times higher sludge concentration than in conventional MBRsystems (TSS up to 50 g⋅l-1).• Impellers ensures low viscosity in the reactor biomass due to the non-Newtonian behaviour of activated sludge.• ↓ energy consumption and ↑ flux.BackgroundViscosity of non-Newtonian (NN) liquids• Shear stress () can be related to shear rate ( )according to a power-law relationship.• where  is the flow consistency index (Pa⋅sn) and is the flow behaviour index (-).Wall shear stress in rotating systems• Impellers generate scouring effect.• ↑ in shear stress prevent particles to attach tomembrane surface due to larger tangential velocities.MethodologyTangential velocity measurements• RCF MBR operates between 50 to 350 rpm (Fig. 2).• Experimental tangential velocity measured at 59, 119 and 177 rpm with water• Measured with Laser Doppler Anemometry (LDA) (Fig. 3)• LDA is an optical technique to measure velocity field in transparent media andcannot be used with activated sludge.CFD model (Fig. 4)• Star CCM+V6.02• Single phase and rigid body motion• Laminar and k- SSTResults and discussionTangential velocity measurements• A good agreement between the experimentalmeasurements and the CFD simulation results, withan error up to 8 % (Fig. 5).Wall shear stress (Fig. 6)• It was inferred from CFD simulation that values of theshear stress were accurate (Fig. 7).• The velocity factor () for the RCF MBR was found tobe 0.795 ± 0.002 (R2 = 0.957), which is within thelimits of k for impeller with vanes (0.35 to 0.85).• CFD model was modified to account for NNbehaviour for 3 different TSS concentrations (30, 40and 50 g⋅l-1) and 4 rotational speeds (50, 150, 250 and350 rpm).•  was found to be 0.525 ± 0.008 (R2 = 0.946), that canbe used for the different angular velocities and TSSconcentrations.Area-weighted average shear stress (Fig. 8)• An empirical relationship, to determine the area-weighted average shear stress in function of angularvelocity (in rpm) andTSS was developed:τ  m	γ m  0.001	exp 2	TSS.n  1  0.23	TSS.Newtonian Non-NewtonianReynolds number  !" #	$	%&' !" #	 $	% &()%)Shear stress• Laminar ( !" * 2 ⋅ 10,) -_/0-  0.77	#	2 &⁄ 	 	$  &⁄ 	% -_/0-_44  56 0 		 ∝)(& 	 	$ )	%)	$ &()	%()	#))8• Turbulent ( !" 9 2 ⋅ 10,) -_:;"  0.0296	#	2 ,⁄ 	 	$ > ,⁄ 	%? ,⁄ -Area-weighted average shear stress• Laminar ( !" * 2 ⋅ 10,) -_/0-  0.5133	#	2 &⁄ 	 	$  &⁄ 	 -   A) -&   A)& -_/0-_44 56 0 	 1 B  	∝)(& 	$)8)	#)8)	8)	2 B 1  A)&   -&	  A)&	 &)88) 	 -&	 &)88)• Turbulent ( !" 9 2 ⋅ 10,) -_:;"  0.0164	#	2 ,⁄ 	 	$ > ,⁄ 	 -? ,⁄  D? ,⁄ -&   D&-* where 2 is kinematic viscosity (2  ' #⁄ ),  is velocity factor and 5′F0G and  are dimensionless velocities in the tangential direction.Figure 1. RCF MBR MBR Grundfos BioBoosterFigure 2. Experimental RCF Figure 3. LDAFigure 4.Real and virtual representation of impeller and membrane.40 g/l30 g/l 50 g/lFigure 5. Tangential velocity vs. radius for 3 impeller velocities (59,119 and 177 rpm).Figure 6. Wall shear stress contours for 250 rpmFigure 7. Shear stress vs. radius for three different TSSconcentrations (30, 40 and 50 g⋅l-1) at an angular velocity of 250 rpm.Figure 8. Area-weighted average shear stress vs. radius for three differentTSS concentrations (30, 40 and 50 g⋅l-1) at an angular velocity of 250 rpm.̅  0.369	IJ	IB 0.013	KLL&  2.873Conclusions• A proper validation of the CFD model was made in terms of tangential velocitymeasurements using a LDA system with water.• RCF MBR operates with AS and LDA measurements cannot be made.• CFD model was modified to account for the viscosity of AS.• Local shear stress at any place of the membrane surface and area-weighted averageshear stress was determined.• An empirical relationship was made, to determine the area-weighted average shearstress in function of the angular velocity (in rpm) and theTSS.

Numerical Modelling of Non-Newtonian Fluid in a Rotational Cross-Flow MBR

https://vbn.aau.dk/ws/files/52959611/Numerical_Modelling_of_Non_Newtonian_Fluid_in_a_Rotational_Cross_Flow_MBR.pdf

Numerical Modelling of Non-Newtonian Fluid in a Rotational Cross-Flow MBR

Abstract

Similar works

Full text

Available Versions

VBN