88,844 research outputs found

    Wideband Channel Estimation and Prediction in Single-Carrier Wireless Systems

    No full text
    Abstract—In this contribution wideband channel estimation and prediction designed for single-carrier wideband wireless communications systems are investigated. Specifically, the single-carrier wideband pilot signal received by the receiver is first converted to the frequency-domain. Then, the envelope of the channel transfer function (CTF) is estimated in the frequency-domain, in order to reduce the effects of background noise on the channel prediction step to be invoked. Finally, channel prediction is carried out based on the estimated CTF in the frequency-domain, where a Kalman filter assisted long-range channel prediction algorithm is employed. Our simulation results show that for a reasonable signal-to-noise ratio (SNR) value the proposed frequency-domain based wideband channel estimator is capable of efficiently mitigating the effects of the background noise, hence enhancing the performance of wideband channel prediction

    A reconfigurable wideband and multiband antenna using dual-patch elements for compact wireless devices

    Get PDF
    This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2012 IEEEA reconfigurable wideband and multiband C-Slot patch antenna with dual-patch elements is proposed and studied. It occupies a compact volume of 50 × 50 × 1.57 (3925 mm3), including the ground plane. The antenna can operate in two dual-band modes and a wideband mode from 5 to 7 GHz. Two parallel C-Slots on the patch elements are employed to perturb the surface current paths for excitation of the dual-band and the wideband modes. Two switches, implemented using PIN diodes, are placed on the connecting lines of a simple feed network to the patch elements. Dual-band modes are achieved by switching “ON” either one of the two patch elements, while the wideband mode with an impedance bandwidth of 33.52% is obtained by switching “ON” both patch elements. The frequencies in the dual-band modes can be independently controlled using positions and dimensions of the C-Slots without affecting the wideband mode. The advantage of the proposed antenna is that two dual-band operations and one wideband operation can be achieved using the same dimensions. This overcomes the need for increasing the surface area normally incurred when designing wideband patch antennas. Simulation results are validated experimentally through prototypes. The measured radiation patterns and peak gains show stable responses and are in good agreements. Coupling between the two patch elements plays a major role for achieving the wide bandwidth and the effects of mutual coupling between the patch elements are also studied

    A novel Multi-permittivity Cylindrical Dielectric Resonator Antenna for Wideband Applications

    Get PDF
    In this paper, a novel multi-permittivity cylindrical dielectric resonator antenna for wideband application is presented. The multi-permittivity cylinder is formed by combining two different permittivity material sectors in such a way that each sector (with constant permittivity) is 90 degree apart. A direct microstrip line coupling terminated with T-stub at the open end is used to excite the multi-permittivity cylindrical dielectric resonator. The angular position of the multi sector dielectric resonator with respect to the longitudinal axis of the microstrip line and length of the additional strip at the open end of the feeding circuit is key parameters for wideband operation of the antenna. By optimizing all parameters of the proposed antenna, wideband impedance bandwidth of 56% (12.1 GHz - 21.65 GHz) is achieved. The average gain of the antenna throughout the bandwidth is 5.9 dB with good radiation properties in both E-plane and H-plane. A well matched simulation and experimental results show that the antenna is suitable for wideband applications

    On the Non-Coherent Wideband Multipath Fading Relay Channel

    Full text link
    We investigate the multipath fading relay channel in the limit of a large bandwidth, and in the non-coherent setting, where the channel state is unknown to all terminals, including the relay and the destination. We propose a hypergraph model of the wideband multipath fading relay channel, and show that its min-cut is achieved by a non-coherent peaky frequency binning scheme. The so-obtained lower bound on the capacity of the wideband multipath fading relay channel turns out to coincide with the block-Markov lower bound on the capacity of the wideband frequency-division Gaussian (FD-AWGN) relay channel. In certain cases, this achievable rate also meets the cut-set upper-bound, and thus reaches the capacity of the non-coherent wideband multipath fading relay channel.Comment: 8 pages, 4 figures, longer version (including proof) of the paper in Proc. of IEEE ISIT 201
    • …
    corecore