7,664 research outputs found
Synthesis, Photochemical, and Redox Properties of Gold(I) and Gold(III) Pincer Complexes Incorporating a 2,2′:6′,2″-Terpyridine Ligand Framework
Reaction of [Au(C6F5)(tht)] (tht = tetrahydrothiophene) with 2,2′:6′,2″-terpyridine (terpy) leads to complex [Au(C6F5)(η1-terpy)] (1). The chemical oxidation of complex (1) with 2 equiv of [N(C6H4Br-4)3](PF6) or using electrosynthetic techniques affords the Au(III) complex [Au(C6F5)(η3-terpy)](PF6)2 (2). The X-ray diffraction study of complex 2 reveals that the terpyridine acts as tridentate chelate ligand, which leads to a slightly distorted square-planar geometry. Complex 1 displays fluorescence in the solid state at 77 K due to a metal (gold) to ligand (terpy) charge transfer transition, whereas complex 2 displays fluorescence in acetonitrile due to excimer or exciplex formation. Time-dependent density functional theory calculations match the experimental absorption spectra of the synthesized complexes. In order to further probe the frontier orbitals of both complexes and study their redox behavior, each compound was separately characterized using cyclic voltammetry. The bulk electrolysis of a solution of complex 1 was analyzed by spectroscopic methods confirming the electrochemical synthesis of complex 2
Electrocarboxylation of chloroacetonitrile by a Cobalt(I) complex of terpyridine
The electrocarboxylation of chloroacetonitrile (NC–CH2–ClRCl) mediated by [CoIIL2]2+ (L = terpyridine) was investigated by cyclic voltammetry. Electrochemical studies under argon atmosphere showed that the monoelectronic reduction of [CoIIL2]2+ yielded a Cobalt(I) complex which after the loss of a terpyridine ligand reacted with chloroacetonitrile. The oxidative addition of chloroacetonitrile on [CoIL]+ gave an alkylCobalt(III) complex [R–CoIIIL]2+ which was reduced into an alkylCobalt(II) complex, highly unstable and decomposed into an alkyl anion and a Cobalt(II) complex. Under carbon dioxide atmosphere, Cobalt(I) complex was shown to be unreactive towards CO2 but CO2 insertion was observed in the alkylCobalt(III) complex [R–CoIIIL] 2+ giving probably a CO2 adduct [R–CoIIIL(CO2)]2+. This adduct presented a strong adsorption at the carbon electrode and was reduced at potential less cathodic than the one of alkylCobalt(III) complex. After reduction, the carboxylate RCO2− (NC–CH2–CO2−) was released and a catalytic bielectronic carboxylation of chloroacetonitrile took place. Controlled potential electrolyses confirmed the catalytic process and gave for cyanoacetic acid faradic yields up to 60% under low overpotential conditions
A novel heteroditopic terpyridine-pincer ligand as building block for mono- and heterometallic Pd(II) and Ru(II) complexes
A palladium-catalyzed Stille coupling reaction was employed as a versatile method for the synthesis of a novel terpyridine-pincer (3, TPBr) bridging ligand, 4'-{4-BrC6H2(CH2NMe2)(2)-3,5}-2,2':6',2 ''-terpyridine. Mononuclear species [PdX(TP)] (X = Br, Cl), [Ru(TPBr)(tpy)](PF6)(2), and [Ru(TPBr)(2)](PF6)(2), synthesized by selective metalation of the NCNBr-pincer moiety or complexation of the terpyridine of the bifunctional ligand TPBr, were used as building blocks for the preparation of heterodi- and trimetallic complexes [Ru(TPPdCl)(tpy)](PF6)(2) (7) and [Ru(TPPdCl)(2)]-(PF6)(2) (8). The molecular structures in the solid state of [PdBr(TP)] (4a) and [Ru(TPBr)(2)](PF6)(2) (6) have been determined by single-crystal X-ray analysis. Electrochemical behavior and photophysical properties of the mono-and heterometallic complexes are described. All the above di- and trimetallic Ru complexes exhibit absorption bands attributable to (MLCT)-M-1 (Ru -> tpy) transitions. For the heteroleptic complexes, the transitions involving the unsubstituted tpy ligand are at a lower energy than the tpy moiety of the TPBr ligand. The absorption bands observed in the electronic spectra for TPBr and [PdCl(TP)] have been assigned with the aid of TD-DFT calculations. All complexes display weak emission both at room temperature and in a butyronitrile glass at 77 K. The considerable red shift of the emission maxima relative to the signal of the reference compound [Ru(tpy)(2)](2+) indicates stabilization of the luminescent (MLCT)-M-3 state. For the mono- and heterometallic complexes, electrochemical and spectroscopic studies (electronic absorption and emission spectra and luminescence lifetimes recorded at room temperature and 77 K in nitrile solvents), together with the information gained from IR spectroelectrochemical studies of the dimetallic complex [Ru(TPPdSCN)(tpy)](PF6)(2), are indicative of charge redistribution through the bridging ligand TPBr. The results are in line with a weak coupling between the {Ru(tpy)(2)} chromophoric unit and the (non)metalated NCN-pincer moiety
Electrical manipulation of spin states in a single electrostatically gated transition-metal complex
We demonstrate an electrically controlled high-spin (S=5/2) to low-spin
(S=1/2) transition in a three-terminal device incorporating a single Mn2+ ion
coordinated by two terpyridine ligands. By adjusting the gate-voltage we reduce
the terpyridine moiety and thereby strengthen the ligand-field on the Mn-atom.
Adding a single electron thus stabilizes the low-spin configuration and the
corresponding sequential tunnelling current is suppressed by spin-blockade.
From low-temperature inelastic cotunneling spectroscopy, we infer the
magnetic excitation spectrum of the molecule and uncover also a strongly
gate-dependent singlet-triplet splitting on the low-spin side. The measured
bias-spectroscopy is shown to be consistent with an exact diagonalization of
the Mn-complex, and an interpretation of the data is given in terms of a
simplified effective model.Comment: Will appear soon in Nanoletter
The d(10) route to dye-sensitized solar cells: step-wise assembly of zinc(II) photosensitizers on TiO2 surfaces
Dye-sensitized solar cells have been assembled using a sequential approach: a TiO2 surface was functionalized with an anchoring ligand, followed by metallation with Zn(OAc)(2) or ZnCl2, and subsequent capping with a chromophore functionalized 2,2`:6`,2 ``-terpyridine; the DSCs exhibit surprisingly good efficiencies confirming the effectiveness of the new strategy for zinc-based DSC fabrication
The surprising lability of bis(2,2’:6’,2’’-terpyridine)- chromium(III) complexes
The complex [Cr(tpy)(O3SCF3)3] (tpy = 2,2′:6′,2′′-terpyridine) is readily made from [Cr(tpy)Cl3] and is a convenient precursor to [Cr(tpy)2][PF6]3 and to [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3 and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3 (4′-(4-tolyl)tpy = 4′-(4-tolyl)-2,2′:6′,2′′-terpyridine; 5,5′′-Me2tpy = 5,5′′-dimethyl-2,2′:6′,2′′-terpyridine); these are the first examples of heteroleptic bis(tpy) chromium(III) complexes. The single crystal structures of 2{[Cr(tpy)2][PF6]3}·5MeCN, [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3·3MeCN and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3·3MeCN have been determined. Each cation contains the expected octahedral {Cr(tpy)2}3+ unit; in all three structures, the need to accommodate three anions per cation and the solvent molecules prevents the formation of a grid-like array of cations that is typical of many lattices containing {M(tpy)2}2+ motifs. Three reversible electrochemical processes are observed for [Cr(tpy)(4′-(4-tolyl)tpy)][PF6]3 and [Cr(tpy)(5,5′′-Me2tpy)][PF6]3, consistent with those documented for [Cr(tpy)2]3+. At pH 6.36, aqueous solutions of [Cr(tpy)2][PF6]3 are stable for at least two months. However, contrary to the expectations of the d3 Cr3+ ion being a kinetically inert metal centre, the tpy ligands in [Cr(tpy)2]3+are labile in the presence of base; absorption and 1H NMR spectroscopies have been used to monitor the effects of adding NaOH to aqueous and CD3OD solutions, respectively, of the homo- and heteroleptic complexes. Ligand dissociation is also observed when [Bu4N]F is added to CD3OD solutions of the complexes, but in aqueous solution, [Cr(tpy)2][PF6]3 is stable in the presence of fluoride ion
Recommended from our members
Near-Infrared and Visible Photoactivation to Uncage Carbon Monoxide from an Aqueous-Soluble PhotoCORM.
Multiphoton excitation allows one to access high energy excited states and perform valuable tasks in biological systems using tissue penetrating near-infrared (NIR) light. Here, we describe new photoactive manganese tricarbonyl complexes incorporating the ligand 4'-p-N,N-bis(2-hydroxyethyl)amino-benzyl-2,2':6',2″-terpyridine (TPYOH), which can serve as an antenna for two photon NIR excitation. Solutions of Mn(CO)3(TPYOH)X (X = Br- or CF3SO3-) complexes are very photoactive toward CO release under visible light excitation (405 nm, 451 nm). The same responses were also triggered by multiphoton excitation at 750 and 800 nm. In this context, we discuss the potential applications of these complexes as visible/NIR light photoactivated carbon monoxide releasing moieties (photoCORMs). We also report the isolation and crystal structures of the TPYOH complexes Mn(TPYOH)Cl2 and [Mn(TPYOH)2](CF3SO3)2, to illustrate a possible photolysis product(s)
A new luminescent Ru(terpy) complex incorporating a 1,2,4-triazole based σ-donor ligand
The mononuclear compound [Ru(terpy)L], where H2L is 2,6-bis(1,2,4-triazol-3-yl)pyridine, shows an emission lifetime of 65 ns, about 300 times longer than that observed for the parent [Ru(terpy)3]2+ complex
Resonant X-ray emission spectroscopy reveals d–d ligand-field states involved in the self-assembly of a square-planar platinum complex
Resonant X-ray Emission Spectroscopy (RXES) is used to characterize the ligand field states of the prototypic self-assembled square-planar complex, [Pt(tpy)Cl]Cl (tpy=2,2′:6′,2′′-terpyridine), and determine the effect of weak metal-metal and π-π interactions on their energy. © 2012 the Owner Societies
Theoretical calculations of an osmium molecular switch
Indexación: Web of Science; Scielo.ABSTRACT
We have investigated the molecular, electronic and optical properties of the [Os(tpy-py)2]2+ complex (tpy-py = 4'-(4-pyridyl)-2,2':6',2"-terpyridine) and its protonated derivative [Os(tpy-pyH)2]4+ through Density Functional Relativistic calculations including Scalar and Spin Orbit corrections. The molecular geometry of the parent complex is not strongly modified by the protonation at the basic nitrogen atoms of the pyridine moieties of the terpyridine ligands in the complex. On the other hand, the optical properties of these complexes can be controlled by a change in the chemical acid-base environment, converting them into suitable materials to act as molecular switches or pH sensor devices.http://ref.scielo.org/54hzc
- …