Handover management in mobile WiMAX using adaptive cross-layer technique

The protocol type and the base station (BS) technology are the main communication media between the Vehicle to Infrastructure (V2I) communication in vehicular networks. During high speed vehicle movement, the best communication would be with a seamless handover (HO) delay in terms of lower packet loss and throughput. Many studies have focused on how to reduce the HO delay during lower speeds of the vehicle with data link (L2) and network (L3) layers protocol. However, this research studied the Transport Layer (L4) protocol mobile Stream Control Transmission Protocol (mSCTP) used as an optimal protocol in collaboration with the Location Manager (LM) and Domain Name Server (DNS). In addition, the BS technology that performs smooth HO employing an adaptive algorithm in L2 to perform the HO according to current vehicle speed was also included in the research. The methods derived from the combination of L4 and the BS technology methods produced an Adaptive Cross-Layer (ACL) design which is a mobility oriented handover management scheme that adapts the HO procedure among the protocol layers. The optimization has a better performance during HO as it is reduces scanning delay and diversity level as well as support transparent mobility among layers in terms of low packet loss and higher throughput. All of these metrics are capable of offering maximum flexibility and efficiency while allowing applications to refine the behaviour of the HO procedure. Besides that, evaluations were performed in various scenarios including different vehicle speeds and background traffic. The performance evaluation of the proposed ACL had approximately 30% improvement making it better than the other handover solutions

Multimedia session continuity in the IP multimedia subsystem : investigation and testbed implementation

Includes bibliographical references (leaves 91-94).The advent of Internet Protocol (IP) based rich multimedia services and applications has seen rapid growth and adoption in recent years, with an equally increasing user base. Voice over IP (VoIP) and IP Television (IPTV) are key examples of services that are blurring the lines between traditional stove-pipe approach network infrastructures. In these, each service required a different network technology to be provisioned, and could only be accessed through a specific end user equipment (UE) technology. The move towards an all-IP core network infrastructure and the proliferation of multi-capability multi-interface user devices has spurred a convergence trend characterized by access to services and applications through any network, any device and anywhere

Vertical Handoff Characterization for SIP and mSCTP Based UMTS-WLAN Integration Solutions

It is desirable to integrate 3G Universal Mobile Telecommunication System (UMTS) and 802.11 wireless local area networks, especially at hot-spot locations such as hotels and airports. The efficiency of wireless data services can be maximized if the integration provides users with seamless roaming across the two types of networks. Seamless handoff between these two networks to maintain session continuity is a major challenge in WLAN-3G integration. To achieve this goal, integration architectures together with mobility solutions such mobile stream control transmission protocol (mSCTP) and session initiation protocol (SIP) have been proposed in the literature. In this paper, we implement through simulations an integration architecture and characterize the vertical handoff delay for both mobility solutions mSCTP and SIP as a function of network parameters. This study finds that mSCTP perform better in terms of handoff delay compared to SIP for the assumptions specified in this paper

A solution for transparent mobility with route optimization in the IP multimedia subsystem

This paper presents TRIM+, an architecture for transparent mobility management with route optimization in IMS based networks. The design of our architecture is based on a previous work referred to as TRIM. TRIM was originally devised to provide transparent mobility support in the IMS, although transparency came at the cost of using a suboptimal data path between communicating end points. TRIM+ maintains transparency as a design criterium, and thus end-user applications, running at the mobile node and its correspondent communication peers, are unaware of mobility management procedures. Additionally, the proposed design defines a set of route optimization procedures, allowing compliant devices to use the optimal data path for media communications. Furthermore, TRIM+ addresses packet loss management in scenarios where the media path cannot be maintained during the handover of the MN. To this end, our architecture enables the MN to request buffering capacity in its home network to temporarily store incoming media traffic during the handover, which would otherwise be dropped. This mechanism, as well as route optimization procedures, are executed transparently to the end-user applications running at the communicating end points. As a proof-of-concept, we have implemented a software prototype of the TRIM+ architecture, deploying it over a real IMS testbed. By means of a set of experiments, we have validated the mechanisms proposed in this paper, considering both UDP and TCP user traffic.This article has been partially granted by the Madrid Commu nity through the MEDIANET project (S 2009/TIC 1468), and by the European Community through the CROWD project (FP7 ICT 318115). The work of Ignacio Soto has been partially sup ported through the I MOVING project (TEC2010 18907).Publicad

Connection Robustness for Wireless Moving Networks Using Transport Layer Multi-homing

Given any form of mobility management through wireless communication, one useful enhancement is improving the reliability and robustness of transport-layer connections in a heterogeneous mobile environment. This is particularly true in the case of mobile networks with multiple vertical handovers. In this thesis, issues and challenges in mobility management for mobile terminals in such a scenario are addressed, and a number of techniques to facilitate and improve efficiency and the QoS for such a handover are proposed and investigated. These are initially considered in an end-to-end context and all protocols and changes happened in the middleware of the connection where the network is involved with handover issues and end user transparency is satisfied. This thesis begins by investigating mobility management solutions particularly the transport layer models, also making significant observation pertinent to multi-homing for moving networks in general. A new scheme for transport layer tunnelling based on SCTP is proposed. Consequently a novel protocol to handle seamless network mobility in heterogeneous mobile networks, named nSCTP, is proposed. Efficiency of this protocol in relation to QoS for handover parameters in an end-to-end connection while wired and wireless networks are available is considered. Analytically and experimentally it has been proved that this new scheme can significantly increase the throughput, particularly when the mobile networks roam frequently. The detailed plan for the future improvements and expansion is also provided

Design of multi-homing architecture for mobile hosts

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis proposes a new multi-homing mobile architecture for future heterogeneous network environment. First, a new multi-homed mobile architecture called Multi Network Switching enabled Mobile IPv6 (MNS-MIP6) is proposed which enables a Mobile Node (MN) having multiple communication paths between itself and its Correspondent Node (CN) to take full advantage of being multi-homed. Multiple communication paths exist because MN, CN, or both are simultaneously attached to multiple access networks. A new sub layer is introduced within IP layer of the host’s protocol stack. A context is established between the MN and the CN. Through this context, additional IP addresses are exchanged between the two. Our MNS-MIP6 architecture allows one communication to smoothly switch from one interface/communication path to another. This switch remains transparent to other layers above IP. Second, to make communication more reliable in multi-homed mobile environments, a new failure detection and recovery mechanism called Mobile Reach ability Protocol (M-REAP) is designed within the proposed MNS-MIP6 architecture. The analysis shows that our new mechanism makes communication more reliable than the existing failure detection and recovery procedures in multi-homed mobile environments. Third, a new network selection mechanism is introduced in the proposed architecture which enables a multi-homed MN to choose the network best suited for particular application traffic. A Policy Engine is defined which takes parameters from iv the available networks, compares them according to application profiles and user preferences, and chooses the best network. The results show that in multi-homed mobile environment, load can be shared among different networks/interfaces through our proposed load sharing mechanism. Fourth, a seamless handover procedure is introduced in the system which enables multi-homed MN to seamlessly roam in a heterogeneous network environment. Layer 2 triggers are defined which assist in handover process. When Signal to Noise Ratio (SNR) on a currently used active interface becomes low, a switch is made to a different active interface. We show through mathematical and simulation analysis that our proposed scheme outperforms the existing popular handover management enhancement scheme in MIPv6 networks namely Fast Handover for MIPv6 (FMIPv6). Finally, a mechanism is introduced to allow legacy hosts to communicate with MNS-MIP6 MNs and gain the benefits of reliability, load sharing and seamless handover. The mechanism involves introducing middle boxes in CN’s network. These boxes are called Proxy-MNS boxes. Context is established between the middle boxes and a multi-homed MN

Roaming Real-Time Applications - Mobility Services in IPv6 Networks

Emerging mobility standards within the next generation Internet Protocol, IPv6, promise to continuously operate devices roaming between IP networks. Associated with the paradigm of ubiquitous computing and communication, network technology is on the spot to deliver voice and videoconferencing as a standard internet solution. However, current roaming procedures are too slow, to remain seamless for real-time applications. Multicast mobility still waits for a convincing design. This paper investigates the temporal behaviour of mobile IPv6 with dedicated focus on topological impacts. Extending the hierarchical mobile IPv6 approach we suggest protocol improvements for a continuous handover, which may serve bidirectional multicast communication, as well. Along this line a multicast mobility concept is introduced as a service for clients and sources, as they are of dedicated importance in multipoint conferencing applications. The mechanisms introduced do not rely on assumptions of any specific multicast routing protocol in use.Comment: 15 pages, 5 figure

Intégration et gestion de mobilité de bout en bout dans les réseaux mobiles de prochaine génération

Résumé - Pendant les dix dernières années, l'utilisation des systèmes de communication sans fil est devenue de plus en plus populaire tant chez les entreprises que chez les particuliers. Cette nouvelle tendance du marché est due, en grande partie, à la performance grandissante des réseaux mobiles qui concurrencent davantage les réseaux filaires en termes de bande passante, de coût et de couverture. Toutefois, cette catégorie de solutions sans fil est conçue pour des services spécifiques et utilise des technologies très variées. De plus, les usagers sont de plus en plus mobiles et requièrent des applications sensibles au délai (voix, multimédia, etc.). Dans ce nouveau contexte de mobilité, la prochaine génération des réseaux sans fil (4G) s'annonce comme l'ultime solution visant à satisfaire les exigences des usagers tout en tirant profit de la complémentarité des services offerts par les systèmes mobiles existants. Pour ce faire, la principale vocation de la future génération (4G) consiste en l'intégration et la convergence des technologies sans fil existantes et celles à venir. Cette intégration passe obligatoirement par l'utilisation du protocole IP (Internet Protocol) qui permet de cacher l'hétérogénéité des systèmes intégrés puisqu'il demeure l'unique couche commune à toutes les plateformes mobiles. Plusieurs solutions d'intégration ont été proposées dans la littérature. Celles-ci concernent des architectures d'intégration et des mécanismes de gestion de mobilité. Cependant, les approches proposées ne font pas l'unanimité et souffrent de plusieurs handicaps liés, en particulier, à l'interopérabilité et la garantie des relèves sans coupures.----------ABSTRACT During the last few years, the use of wireless systems is becoming more and more popular. This tendency can be explained by the fact that mobile technologies are gaining in performance in terms of bandwidth, coverage and cost compared to the traditional wired solutions. However, each mobile network is tailored for a specific type of services and users. Moreover, end users are expected to become more and more mobile and show an increasing interest to real-time applications. In these circumstances, the next generation of mobile networks (4G) appears to be the ultimate solution that will satisfy mobile user demands and take benefit of the existing wireless systems. Indeed, the future generation consists of integrating, in an intelligent manner, the existing/future wireless systems in a way that users can obtain their services via the best available network. This integration passes through the use of the Internet Protocol (IP) that will hide the heterogeneity pertaining to the integrated networks. To deal with this very important task, several solutions are available in the literature. The proposed approaches cover some basic topics such as interworking architecture and mobility management. Nevertheless, these proposals suffer from drawbacks relevant to the guarantee of QoS through heterogeneous technologies