Modeling of Cu oxidation in adiabatic fixed-bed reactor with N2 recycling in a Ca/Cu chemical loop

A dynamic model has been constructed to describe the Cu oxidation reaction within a large-scale Cu/CuO chemical looping process in adiabatic fixed-bed reactors. Careful control of the temperature is required during Cu oxidation because of its high reaction enthalpy. The recycling of a large amount of nitrogen, previously cooled down, and its mixture with air for Cu oxidation regulates the temperature in the reaction front, ensuring that undesirable hot spots that would lead to the irreversible loss of Cu activity are avoided. Since the gas/solid heat exchange front advances faster than the reaction front, the bed is eventually left at a low temperature. An additional stage was added to allow a gas/solid heat exchange between the hot recycled gas and the oxidized bed. This ensures that the fixed-bed is ready for the next reaction step that involves the reduction of CuO by a fuel gas. A sensitivity analysis of the main operating parameters confirms the theoretical viability of this operation. Cu oxidation is favored at high pressure and therefore fast reaction rates were achieved, even with low contents of oxygen in the feed (around 3–4%). The recirculation of more than 80% of the exit gas from the oxidation reactor and its subsequent cooling down to around 423 K keep the maximum temperature down to within reasonable values (1173 K). Although this work was focused on the boundary conditions of the Ca/Cu looping process for hydrogen production and/or power generation, some of the trends observed may be considered valid for other CLC systems that use similar N2 recycles.The authors acknowledge the grant awarded by the Spanish Science and Innovation Ministry under the project ENE2009-11353 and CSIC (201280E017).Peer reviewe

Modeling of Cu oxidation in adiabatic fixed-bed reactor with N2 recycling in a Ca/Cu chemical loop

A dynamic model has been constructed to describe the Cu oxidation reaction within a large-scale Cu/CuO chemical looping process in adiabatic fixed-bed reactors. Careful control of the temperature is required during Cu oxidation because of its high reaction enthalpy. The recycling of a large amount of nitrogen, previously cooled down, and its mixture with air for Cu oxidation regulates the temperature in the reaction front, ensuring that undesirable hot spots that would lead to the irreversible loss of Cu activity are avoided. Since the gas/solid heat exchange front advances faster than the reaction front, the bed is eventually left at a low temperature. An additional stage was added to allow a gas/solid heat exchange between the hot recycled gas and the oxidized bed. This ensures that the fixed-bed is ready for the next reaction step that involves the reduction of CuO by a fuel gas. A sensitivity analysis of the main operating parameters confirms the theoretical viability of this operation. Cu oxidation is favored at high pressure and therefore fast reaction rates were achieved, even with low contents of oxygen in the feed (around 3–4%). The recirculation of more than 80% of the exit gas from the oxidation reactor and its subsequent cooling down to around 423 K keep the maximum temperature down to within reasonable values (1173 K). Although this work was focused on the boundary conditions of the Ca/Cu looping process for hydrogen production and/or power generation, some of the trends observed may be considered valid for other CLC systems that use similar N2 recycles.The authors acknowledge the grant awarded by the Spanish Science and Innovation Ministry under the project ENE2009-11353 and CSIC (201280E017).Peer reviewe