Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties

The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse

Precise determination of the mass of the Higgs boson and tests of compatibility of its couplings with the standard model predictions using proton collisions at 7 and 8 TeV

Peer reviewe

Search for Dark Matter and Supersymmetry with a Compressed Mass Spectrum in the Vector Boson Fusion Topology in Proton-Proton Collisions at root s=8 TeV

Peer reviewe

Search for lepton flavour violating decays of the Higgs boson to eτand eμin proton–proton collisions at √s=8TeV

A direct search for lepton flavour violating decays of the Higgs boson (H) in the H →eτand H →eμchannels is described. The data sample used in the search was collected in proton–proton collisions at √s=8TeVwith the CMS detector at the LHC and corresponds to an integrated luminosity of 19.7fb−1. No evidence is found for lepton flavour violating decays in either final state. Upper limits on the branching fractions, B(H →eτ) <0.69%and B(H →eμ) <0.035%, are set at the 95% confidence level. The constraint set on B(H →eτ)is an order of magnitude more stringent than the existing indirect limits. The limits are used to constrain the corresponding flavour violating Yukawa couplings, absent in the standard model

Measurements of the t(t)over-bar production cross section in lepton plus jets final states in pp collisions at 8 and ratio of 8 to 7 TeV cross sections

Peer reviewe

Measurements of the Upsilon(1S), Upsilon(2S), and Upsilon(3S) differential cross sections in pp collisions at root s=7 TeV

Peer reviewe

Measurement of the Zγ production cross section in pp collisions at 8 TeV and search for anomalous triple gauge boson couplings

Open Access, Copyright CERN, for the benefit of the CMS Collaboration. Article funded by SCOAP3.Abstract: The cross section for the production of Zγ in proton-proton collisions at 8 TeV is measured based on data collected by the CMS experiment at the LHC corresponding to an integrated luminosity of 19.5 fb−1. Events with an oppositely-charged pair of muons or electrons together with an isolated photon are selected. The differential cross section as a function of the photon transverse momentum is measured inclusively and exclusively, where the exclusive selection applies a veto on central jets. The observed cross sections are compatible with the expectations of next-to-next-to-leading-order quantum chromodynamics. Limits on anomalous triple gauge couplings of ZZγ and Zγγ are set that improve on previous experimental results obtained with the charged lepton decay modes of the Z boson

Measurement of the production cross section ratio σ(χb2(1P))/σ(χb1(1P))in pp collisions at √s=8TeV

A measurement of the production cross section ratio σ(χb2(1P))/σ(χb1(1P))σ(χb2(1P))/σ(χb1(1P)) is presented. The χb1(1P)χb1(1P) and χb2(1P)χb2(1P) bottomonium states, promptly produced in pp collisions at View the MathML sources=8 TeV, are detected by the CMS experiment at the CERN LHC through their radiative decays χb1,2(1P)→ϒ(1S)+γχb1,2(1P)→ϒ(1S)+γ. The emitted photons are measured through their conversion to e+e−e+e− pairs, whose reconstruction allows the two states to be resolved. The ϒ(1S)ϒ(1S) is measured through its decay to two muons. An event sample corresponding to an integrated luminosity of 20.7 fb−120.7 fb−1 is used to measure the cross section ratio in a phase-space region defined by the photon pseudorapidity, |ηγ|<1.0|ηγ|<1.0; the ϒ(1S)ϒ(1S) rapidity, |yϒ|<1.5|yϒ|<1.5; and the ϒ(1S)ϒ(1S) transverse momentum, View the MathML source7<pTϒ<40 GeV. The cross section ratio shows no significant dependence on the ϒ(1S)ϒ(1S) transverse momentum, with a measured average value of View the MathML source0.85±0.07(stat+syst)±0.08(BF), where the first uncertainty is the combination of the experimental statistical and systematic uncertainties and the second is from the uncertainty in the ratio of the χbχb branching fractions

Search for strongly interacting massive particles generating trackless jets in proton-proton collisions at s = 13 TeV

A search for dark matter in the form of strongly interacting massive particles (SIMPs) using the CMS detector at the LHC is presented. The SIMPs would be produced in pairs that manifest themselves as pairs of jets without tracks. The energy fraction of jets carried by charged particles is used as a key discriminator to suppress efficiently the large multijet background, and the remaining background is estimated directly from data. The search is performed using proton-proton collision data corresponding to an integrated luminosity of 16.1 fb - 1 , collected with the CMS detector in 2016. No significant excess of events is observed above the expected background. For the simplified dark matter model under consideration, SIMPs with masses up to 100 GeV are excluded and further sensitivity is explored towards higher masses