45 research outputs found
Advanced seismic characterization of a geothermal carbonate reservoir – insight into the structure and diagenesis of a reservoir in the German Molasse Basin
The quality of geothermal carbonate reservoirs is controlled by, for instance, depositional environment, lithology, diagenesis, karstification, fracture networks, and tectonic deformation. Carbonatic rock formations are thus often extremely heterogeneous, and reservoir parameters and their spatial distribution difficult to predict. Using a 3D seismic dataset combined with well data from Munich, Germany, we demonstrate how a comprehensive seismic attribute analysis can significantly improve the understanding of a complex carbonate reservoir. We deliver an improved reservoir model concept and identify possible exploitation targets within the Upper Jurassic carbonates. We use seismic attributes and different carbonate lithologies from well logs to identify parameter correlations. From this, we obtain a supervised neural-network-based 3D lithology model of the geothermal reservoir. Furthermore, we compare fracture orientations measured in seismic (ant-tracking analysis) and well scale (image log analysis) to address scalability. Our results show that, for example, acoustic impedance is suitable to identify reefs and karst-related dolines, and sweetness proves useful to analyse the internal reef architecture, whereas frequency- and phase-related attributes allow the detection of karst. In addition, reef edges, dolines, and fractures, associated with high permeabilities, are characterized by strong phase changes. Fractures are also identified using variance and ant tracking. Morphological characteristics, like dolines, are captured using the shape index. Regarding the diagenetic evolution of the reservoir and the corresponding lithology distribution, we show that the Upper Jurassic carbonate reservoir experienced a complex evolution, consisting of at least three dolomitization phases, two karstification phases, and a phase of tectonic deformation. We observe spatial trends in the degree of dolomitization and show that it is mainly facies-controlled and that karstification is facies- and fault-controlled. Karstification improves porosity and permeability, whereas dolomitization can either increase or decrease porosity. Therefore, reservoir zones should be exploited that experienced only weak diagenetic alteration, i.e. the dolomitic limestone in the upper part of the Upper Jurassic carbonates. Regarding the fracture scalability across seismic and well scales, we note that a general scalability is, due to a combination of methodological limitations and geological reasons, not possible. Nevertheless, both methods provide an improved understanding of the fracture system and possible fluid pathways. By integrating all the results, we are able to improve and adapt recent reservoir concepts, to outline the different phases of the reservoir's structural and diagenetic evolution, and to identify high-quality reservoir zones in the Munich area. These are located southeast at the Ottobrunn Fault and north of the Munich Fault close to the Nymphenburg Fault.</p
Steps and catalytic reactions: CO oxidation with preadsorbed O on Rh(553)
Industrial catalysts are often comprised of nanoparticles supported on high-surface-area oxides, in order to maximise the catalytically active surface area and thereby utilise the active material better. These nanoparticles expose steps and corners that, due to low coordination to neighboring atoms, are more reactive and, as a consequence, are often assumed to have higher catalytic activity. We have investigated the reaction between CO and preadsorbed O on a stepped Rh(553) surface, and show that CO oxidation indeed occurs faster than on the flat Rh(111) surface at the same temperature. However, we do find that this is not a result of reactions at the step sites but rather at the terrace sites close to the steps, due to in-plane relaxation enabled by the step. This insight can provide ways to optimize the shape of the nanoparticles to further improve the activity of certain reactions
Structure of the SnO2(110)-(4 x 1) Surface
Using surface x-ray diffraction (SXRD), quantitative low-energy electron diffraction (LEED), and
density-functional theory (DFT) calculations, we have determined the structure of the (4 Ă— 1)
reconstruction formed by sputtering and annealing of the SnO2Ă°110Ăž surface. We find that the
reconstruction consists of an ordered arrangement of Sn3O3 clusters bound atop the bulk-terminated
SnO2Ă°110Ăž surface. The model was found by application of a DFT-based evolutionary algorithm with
surface compositions based on SXRD, and shows excellent agreement with LEED and with previously
published scanning tunneling microscopy measurements. The model proposed previously consisting of inplane
oxygen vacancies is thus shown to be incorrect, and our result suggests instead that Sn(II) species in
interstitial positions are the more relevant features of reduced SnO2Ă°110Ăž surfaces
Adsorption of NO on Fe3O4(111)
Adsorption of NO on Fe 3 O 4 (111) is studied by density functional theory (DFT) calculations. NO is preferably adsorbed atop the octahedral site which has a clearly higher adsorption energy than the tetrahedral site. The difference in adsorption energy correlates with differences in adsorption geometries and N–O stretch vibrations. The results are in good agreement with temperature programmed desorption (TPD) and reflection-adsorption IR spectroscopy (RAIRS) measurements and provide an explanation of the observation of only one vibrational mode despite two distinct TPD features
High-Energy Surface X-ray Diffraction for Fast Surface Structure Determination
Understanding the interaction between surfaces and their surroundings is crucial in many materials-science fields such as catalysis, corrosion, and thin-film electronics, but existing characterization methods have not been capable of fully determining the structure of surfaces during dynamic processes, such as catalytic reactions, in a reasonable time frame. We demonstrate an x-ray-diffraction–based characterization method that uses high-energy photons (85 kiloelectron volts) to provide unexpected gains in data acquisition speed by several orders of magnitude and enables structural determinations of surfaces on time scales suitable for in situ studies. We illustrate the potential of high-energy surface x-ray diffraction by determining the structure of a Pd surface in situ during catalytic CO oxidation and follow dynamic restructuring of the surface with subsecond time resolution
A Novel Method to Maintain the Sample Position and Pressure in Differentially Pumped Systems Below the Resolution Limit of Optical Microscopy Techniques
State of the Surface During CO Hydrogenation over Ni(111) and Ni(211) Probed by Operando X-ray Photoelectron Spectroscopy
The state of the surface near-region during CO hydrogenation of Ni(111) and Ni(211) single crystal surfaces was investigated using various gas mixtures between 150 and 500 mbar, 200 and 325 °C, by operando X-ray photoelectron spectroscopy. We report how higher temperatures and hydrogen content correlate with a movement of CO away from the on-top configurations and toward multicoordinated sites of the nickel surface and how a nickel carbide is formed in the surface near region, particularly at high partial pressures of CO and lower temperatures. The presence of the carbide affects the CO bonding and was observed to be reduced during hydrogen-rich conditions and temperatures above 250 °C