Investigation of Critical Burning of Fuel Droplets

An earlier analysis for the combustion response of a liquid monopropellant strand (hydrazine) was extended to consider individual droplets and sprays. While small drops gave low or negative response, large droplets provided response near unity at low frequencies, with the response declining at frequencies greater than the characteristic liquid phase frequency. Temperature gradients in the liquid phase resulted in response peaks greater than unity. A second response peak was found for large drops which corresponded to gas phase transient effects. Spray response was generally reduced from the response of the largest injected droplet, however, even a small percentage of large droplets can yield appreciable response. An apparatus was designed and fabricated to allow observation of bipropellant fuel spray combustion at elevated pressures. A locally homogeneous model was developed to describe this combustion process which allows for high pressure phenomena associated with the thermodynamic critical point

A MERLIN Observation of PSR B1951+32 and its associated Plerion

In an investigative 16 hour L band observation using the MERLIN radio interferometric array, we have resolved both the pulsar PSR B1951+32 and structure within the flat spectral radio continuum region, believed to be the synchrotron nebula associated with the interaction of the pulsar and its `host' supernova remnant CTB 80. The extended structure we see, significant at $\sim$ 4.5 $\sigma$, is of dimensions 2.5" $\times$ 0.75", and suggests a sharp bow shaped arc of shocked emission, which is correlated with similar structure observed in lower resolution radio maps and X-ray images. Using this MERLIN data as a new astrometric reference for other multiwavelength data we can place the pulsar at one edge of the HST reported optical synchrotron knot, ruling out previous suggested optical counterparts, and allowing an elementary analysis of the optical synchrotron emission which appears to trail the pulsar. The latter is possibly a consequence of pulsar wind replenishment, and we suggest that the knot is a result of magnetohydrodynamic (MHD) instabilities. These being so, it suggests a dynamical nature to the optical knot, which will require high resolution optical observations to confirm.Comment: 12 pages, 2 figures. Accepted for publication in ApJ

Pesticide Application and Handling Technology: Proper Disposal of Empty Pesticide Containers

Recycling has become more and more popular as our awareness of environmental concerns grow. These environmental concerns have led to increased participation in recycling efforts among today\u27s farmers. Many farmers throughout Kentucky are now able to recycle their empty plastic pesticide containers (Five gallon or less) due to a statewide Rinse and Return program. Recycling of empty containers provides a safe means of disposal for applicators, reduces landfill space, and protects our valuable water resources

Pesticide Application and Handling Technology: Installing a Sprayer Tank Rinse Circuit

Proper tank rinsing techniques for agricultural sprayers are very important in order to protect against cross-contamination in subsequent loads and to ensure safe disposal of any excess chemicals and rinsate (rinse water). Spray tanks and other sprayer components should be cleaned after each use. In most situations, sprayer rinsate will have to be sprayed out in the field - either onto a reserved strip, or by over-spraying in the treated area (subject to the terms of the product label)

Integration Of An Extended Octagonal Ring Transducer And Soil Coulterometer For Identifying Soil Compaction

The soil coulterometer is an “on‐the‐go” electro‐mechanical system which collects impedance force data at multiple depths using an oscillating coulter. During the initial testing (summer 2006), only vertical soil impedance force data was collected using a pressure sensor. To improve the performance of the coulterometer, an extended octagonal ring transducer was integrated into the system to collect both the horizontal and vertical impedance forces given by the soil. In the summer of 2007, data was collected using the revised sensor from a typical central Kentucky field setting in a 0.8‐ha (2‐acre) plot. Four passes were made with the coulterometer. Seventy five coulter oscillations between depths of 100 mm (4 in.) and 305 mm (12 in.) were obtained for each pass. Ten standard cone penetrometer measurements were taken for each pass between depths of 100 mm (4 in.) and 305 mm (12 in.) using a multi‐probe soil cone penetrometer. Three soil bulk density and water content measurements between depths of 100 mm (4 in.) and 305 mm (12 in.) in steps of 50 mm (2 in.) were taken for each pass using a nuclear soil moisture/density gauge. Simple linear regression analysis was used to find the relationship between coulter indices (kN/m), cone index (MPa), dry soil bulk density (Mg/m3) and water content (%).Coefficients of determination (R2) as high as 0.996 were obtained between coulter indices and dry soil bulk density measurements and 0.998 for coulter indices and water content measurements

Segregation by thermal diffusion in granular shear flows

Segregation by thermal diffusion of an intruder immersed in a sheared granular gas is analyzed from the (inelastic) Boltzmann equation. Segregation is induced by the presence of a temperature gradient orthogonal to the shear flow plane and parallel to gravity. We show that, like in analogous systems without shear, the segregation criterion yields a transition between upwards segregation and downwards segregation. The form of the phase diagrams is illustrated in detail showing that they depend sensitively on the value of gravity relative to the thermal gradient. Two specific situations are considered: i) absence of gravity, and ii) homogeneous temperature. We find that both mechanisms (upwards and downwards segregation) are stronger and more clearly separated when compared with segregation criteria in systems without shear.Comment: 8 figures. To appear in J. Stat. Mec