336 research outputs found
Silicon on Ceramic Process: Silicon Sheet Growth and Device Development for the Large-area Silicon Sheet and Cell Development Tasks of the Low-cost Solar Array Project
The technical and economic feasibility of producing solar cell quality sheet silicon was investigated. It was hoped this could be done by coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. Work was directed towards the solution of unique cell processing/design problems encountered with the silicon-ceramic (SOC) material due to its intimate contact with the ceramic substrate. Significant progress was demonstrated in the following areas; (1) the continuous coater succeeded in producing small-area coatings exhibiting unidirectional solidification and substatial grain size; (2) dip coater succeeded in producing thick (more than 500 micron) dendritic layers at coating speeds of 0.2-0.3 cm/sec; and (3) a standard for producing total area SOC solar cells using slotted ceramic substrates was developed
Silicon-on-ceramic process: Silicon sheet growth and device development for the large-area silicon sheet task of the low-cost solar array project
The technical feasibility of producing solar cell quality sheet silicon to meet the DOE 1986 cost goal of 70 cents/watt was investigated. The silicon on ceramic approach is to coat a low cost ceramic substrate with large grain polycrystalline silicon by unidirectional solidification of molten silicon. Results and accomplishments are summarized
Ready Student One: Exploring the predictors of student learning in virtual reality
Immersive virtual reality (VR) has enormous potential for education, but
classroom resources are limited. Thus, it is important to identify whether and
when VR provides sufficient advantages over other modes of learning to justify
its deployment. In a between-subjects experiment, we compared three methods of
teaching Moon phases (a hands-on activity, VR, and a desktop simulation) and
measured student improvement on existing learning and attitudinal measures.
While a substantial majority of students preferred the VR experience, we found
no significant differences in learning between conditions. However, we found
differences between conditions based on gender, which was highly correlated
with experience with video games. These differences may indicate certain groups
have an advantage in the VR setting.Comment: 28 pages, 7 figures, 4 tables. Published in PLOS ONE March 25, 202
PHARAO Laser Source Flight Model: Design and Performances
In this paper, we describe the design and the main performances of the PHARAO
laser source flight model. PHARAO is a laser cooled cesium clock specially
designed for operation in space and the laser source is one of the main
sub-systems. The flight model presented in this work is the first
remote-controlled laser system designed for spaceborne cold atom manipulation.
The main challenges arise from mechanical compatibility with space constraints,
which impose a high level of compactness, a low electric power consumption, a
wide range of operating temperature and a vacuum environment. We describe the
main functions of the laser source and give an overview of the main
technologies developed for this instrument. We present some results of the
qualification process. The characteristics of the laser source flight model,
and their impact on the clock performances, have been verified in operational
conditions.Comment: Accepted for publication in Review of Scientific Instrument
Recommended from our members
Change but no climate change: discourses of climate change in corporate social responsibility reporting in the oil industry
Using corpus linguistic tools and methods, this paper investigates the discourses of climate change in corporate social responsibility (CSR) and environmental reports produced by major oil companies from 2000 to 2013. It focuses on the frequency of key references to climatic changes and examines in detail discourses surrounding the most frequently used term ‘climate change’. The analysis points to shifting patterns in the ways in which climate change has been discursively constructed in the studied sample. Whereas in the mid-2000s, it was seen as a phenomenon that something could be done about, in recent years the corporate discourse has increasingly emphasised the notion of risk portraying climate change as an unpredictable agent. A pro-active stance signalled by the use of force metaphors is offset by a distancing strategy often indicated through the use of hedging devices and ‘relocation’ of climate change to the future and other stakeholders. In doing so, the discourse obscures the sector’s large contribution to environmental degradation and ‘grooms’ the public perception to believe that the industry actively engages in climate change mitigation. At the methodological level, this study shows how a combination of quantitative corpus-linguistic and qualitative discourse-analytical techniques can offer insights into the existence of salient discursive patterns and contribute to a better understanding of the role of language in performing ideological work in corporate communications
Heat treatment significantly increases the sharpness of silcrete stone tools
Humans were regularly heat-treating stone tool raw materials as early as 130,000 years ago. The late Middle Stone Age (MSA) and Late Stone Age (LSA) of South Africa's Western Cape region provides some of the earliest and most pervasive archaeological evidence for this behaviour. While archaeologists are beginning to understand the flaking implications of raw material heat treatment, its potential functional benefits remain unanswered. Using silcrete from the Western Cape region, we investigate the impact of heat treatment on stone tool cutting performance. We quantify the sharpness of silcrete in its natural, unheated form, before comparing it with silcrete heated in three different conditions. Results show that heat-treated silcrete can be significantly sharper than unheated alternatives, with cutting forces halving and energy requirements reducing by approximately two-thirds. The data suggest that silcrete may have been heat treated during the South African MSA and LSA to increase the sharpness and performance of stone cutting edges. This early example of material engineering has implications for understanding Stone Age populations’ technological capabilities, inventiveness and raw material choices. We predict that heat-treatment behaviours in other prehistoric and ethnographic contexts may also be linked to increases in edge sharpness and concerns about functional performance
Does the number of implants have any relation with peri-implant disease?
Objective: The aim of this study was to evaluate the relationship between the number of pillar implants of implant-supported fixed prostheses and the prevalence of periimplant disease. Material and Methods: Clinical and radiographic data were obtained for the evaluation. The sample consisted of 32 patients with implant-supported fixed prostheses in function for at least one year. A total of 161 implants were evaluated. Two groups were formed according to the number of implants: G1) ≤5 implants and G2) >5 implants. Data collection included modified plaque index (MPi), bleeding on probing (BOP), probing depth (PD), width of keratinized mucosa (KM) and radiographic bone loss (BL). Clinical and radiographic data were grouped for each implant in order to conduct the diagnosis of mucositis or peri-implantitis. Results: Clinical parameters were compared between groups using Student’s t test for numeric variables (KM, PD and BL) and Mann-Whitney test for categorical variables (MPi and BOP). KM and BL showed statistically significant differences between both groups (p<0.001). Implants from G1 – 19 (20.43%) – compared with G2 – 26 (38.24%) – showed statistically significant differences regarding the prevalence of peri-implantitis (p=0.0210). Conclusion: It seems that more than 5 implants in total fixed rehabilitations increase bone loss and consequently the prevalence of implants with periimplantitis. Notwithstanding, the number of implants does not have any influence on the prevalence of mucositis
TRY plant trait database - enhanced coverage and open access
Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives
- …