Quantum-optical influences in optoelectronics - an introduction

This focused review discusses the increasing importance of quantum optics in the physics and engineering of optoelectronic components. Two influences relating to cavity quantum electrodynamics are presented. One involves the development of low threshold lasers, when the channeling of spontaneous emission into the lasing mode becomes so efficient that the concept of lasing needs revisiting. The second involves the quieting of photon statistics to produce single-photon sources for applications such as quantum information processing. An experimental platform, consisting of quantum-dot gain media inside micro- and nanocavities, is used to illustrate these influences of the quantum mechanical aspect of radiation. An overview is also given on cavity quantum electrodynamics models that may be applied to analyze experiments or design devices.EC/FP7/615613/EU/External Quantum Control of Photonic Semiconductor Nanostructures/EXQUISIT

Micropillars with a controlled number of site-controlled quantum dots

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 112, 071101 (2018) and may be found at https://doi.org/10.1063/1.5017692.We report on the realization of micropillars with site-controlled quantum dots (SCQDs) in the active layer. The SCQDs are grown via the buried stressor approach which allows for the positioned growth and device integration of a controllable number of QDs with high optical quality. This concept is very powerful as the number and the position of SCQDs in the cavity can be simultaneously controlled by the design of the buried-stressor. The fabricated micropillars exhibit a high degree of position control for the QDs above the buried stressor and Q-factors of up to 12 000 at an emission wavelength of around 930 nm. We experimentally analyze and numerically model the cavity Q-factor, the mode volume, the Purcell factor, and the photon-extraction efficiency as a function of the aperture diameter of the buried stressor. Exploiting these SCQD micropillars, we experimentally observe a Purcell enhancement in the single-QD regime with FP = 4.3 ± 0.3.EC/FP7/615613/EU/External Quantum Control of Photonic Semiconductor Nanostructures/EXQUISITEDFG, SFB 787, Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

Optimal Squeezing in Resonance Fluorescence via Atomic-State Purification

Squeezing of atomic resonance fluorescence is shown to be optimized by a properly designed environment, which can be realized by a quasi-resonant cavity. Optimal squeezing is achieved if the atomic coherence is maximized, corresponding to a pure atomic quantum state. The atomic-state purification is achieved by the backaction of the cavity field on the atom, which increases the atomic coherence and decreases the atomic excitation. For realistic cavities, the coupling of the atom to the cavity field yields a purity of the atomic state of more than 99%. The fragility of squeezing against dephasing is substantially reduced in this scenario, which may be important for various applications.Comment: 6 pages including supplemental information, 3 figures. Accepted for PR

Numerical optimization of the extraction efficiency of a quantum-dot based single-photon emitter into a single-mode fiber

We present a numerical method for the accurate and efficient simulation of strongly localized light sources, such as quantum dots, embedded in dielectric micro-optical structures. We apply the method in order to optimize the photon extraction efficiency of a single-photon emitter consisting of a quantum dot embedded into a multi-layer stack with further lateral structures. Furthermore, we present methods to study the robustness of the extraction efficiency with respect to fabrication errors and defects.Comment: 14 pages, 7 figures, accepted for publication in Optics Expres

All-Optical Depletion of Dark Excitons from a Semiconductor Quantum Dot

Semiconductor quantum dots are considered to be the leading venue for fabricating on-demand sources of single photons. However, the generation of long-lived dark excitons imposes significant limits on the efficiency of these sources. We demonstrate a technique that optically pumps the dark exciton population and converts it to a bright exciton population, using intermediate excited biexciton states. We show experimentally that our method considerably reduces the DE population while doubling the triggered bright exciton emission, approaching thereby near-unit fidelity of quantum dot depletion.Comment: 5 pages, 3 figure

Cesium‐vapor‐based delay of single photons emitted by deterministically fabricated quantum dot microlenses

Quantum light sources are key building blocks of photonic quantum technologies. For many applications, it is of interest to control the arrival time of single photons emitted by such quantum devices, or even to store single photons in quantum memories. In situ electron beam lithography is applied to realize InGaAs quantum dot (QD)‐based single‐photon sources, which are interfaced with cesium (Cs) vapor to control the time delay of emitted photons. Via numerical simulations of the light–matter interaction in realistic QD‐Cs‐vapor configurations, the influence of the vapor temperature and spectral QD‐atom detuning is explored to maximize the achievable delay in experimental studies. As a result, this hybrid quantum system allows to trigger the emission of single photons with a linewidth as low as 1.54 GHz even under non‐resonant optical excitation and to delay the emission pulses by up to (15.71 ± 0.01) ns for an effective cell length of 150 mm. This work can pave the way for scalable quantum systems relying on a well‐controlled delay of single photons on a time scale of up to a few tens of nanoseconds.BMBF, 03V0630TIB, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die QuanteninformationstechnologieBMBF, 13N14876, Quantenkommunikations-Systeme auf Basis von Einzelphotonenquellen (QuSecure)DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeTU Berlin, Open-Access-Mittel - 201

Operating single quantum emitters with a compact Stirling cryocooler

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments 86, 013113 (2015) and may be found at https://doi.org/10.1063/1.4906548.The development of an easy-to-operate light source emitting single photons has become a major driving force in the emerging field of quantum information technology. Here, we report on the application of a compact and user-friendly Stirling cryocooler in the field of nanophotonics. The Stirling cryocooler is used to operate a single quantum emitter constituted of a semiconductor quantum dot (QD) at a base temperature below 30 K. Proper vibration decoupling of the cryocooler and its surrounding enables free-space micro-photoluminescence spectroscopy to identify and analyze different charge-carrier states within a single quantum dot. As an exemplary application in quantum optics, we perform a Hanbury-Brown and Twiss experiment demonstrating a strong suppression of multi-photon emission events with g(2)(0) < 0.04 from this Stirling-cooled single quantum emitter under continuous wave excitation. Comparative experiments performed on the same quantum dot in a liquid helium (LHe)-flow cryostat show almost identical values of g(2)(0) for both configurations at a given temperature. The results of this proof of principle experiment demonstrate that low-vibration Stirling cryocoolers that have so far been considered exotic to the field of nanophotonics are an attractive alternative to expensive closed-cycle cryostats or LHe-flow cryostats, which could pave the way for the development of high-quality table-top non-classical light sources.BMBF, 03V0630, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die Quanteninformationstechnologie (QSOURCE)DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, Bauelement

Dephasing of Mollow Triplet Sideband Emission of a Resonantly Driven Quantum Dot in a Microcavity

Detailed properties of resonance fluorescence from a single quantum dot in a micropillar cavity are investigated, with particular focus on emission coherence in dependence on optical driving field power and detuning. Power-dependent series over a wide range could trace characteristic Mollow triplet spectra with large Rabi splittings of $|\Omega| \leq 15$ GHz. In particular, the effect of dephasing in terms of systematic spectral broadening $\propto \Omega^2$ of the Mollow sidebands is observed as a strong fingerprint of excitation-induced dephasing. Our results are in excellent agreement with predictions of a recently presented model on phonon-dressed QD Mollow triplet emission in the cavity-QED regime