Load-shortening behavior of an initially curved eccentrically loaded column

To explore the feasibility of using buckled columns to provide a soft support system for simulating a free-free boundary condition in dynamic testing, the nonlinear load-shortening behavior of initially imperfect, eccentrically loaded slender columns is analyzed. Load-shortening curves are obtained for various combinations of load eccentricity and uniform initial curvature and are compared, for reference purposes, with the limiting case of the classical elastica. Results for numerous combinations of initial curvature and load eccentricity show that, over a wide range of shortening, an axially loaded slender column exhibits load-deflection compliance which is of the same order as that of a straight but otherwise identical cantilever beam under lateral tip loading

THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS EFFECT OF TWO-SCALE ROUGHNESS ON BOUNDARY LAYER TRANSITION OVER A HEATED FLAT PLATE: PART 2-BOUNDARY LAYER STRUCTURE 1111111111111111IIIIIIII

ABSTRACT NOMENCLATURE The nomenclature used in the present paper has been included with part one

Simultaneously increasing the hydrophobicity and interfacial adhesion of carbon fibres: a simple pathway to install passive functionality into composites

International audienceA common strategy to enhance the fibre-to-matrix adhesion of carbon fibres is to increase the surface polarity using extensive and harsh oxidation techniques. In this work, we use a novel and scalable strategy to significantly increase the hydrophobicity of carbon fibres without any sacrifice in the fibres' physical properties and demonstrate simultaneous increases to the fibre-to-matrix adhesion (59-216%). These findings contradict the commonly accepted paradigm of high fibre polarity correlating to increased interfacial adhesion. We demonstrate the ability to covalently modify the surface of carbon fibres through electrochemical reduction of nitroaryldiazonium salts to generate perfluorinated alkyl radicals. Surface modification was confirmed by XPS, ATRIR, and TEM. The surfaces produced are highly hydrophobic, though this may be mitigated through the reduction of nitro groups to amines, or increased through the accumulative effects of perfluoroalkyl chains and nitro groups (WCA ranges from 99.9 AE 0.4 up to 135.5 AE 0.2 , versus pristine fibre 98.4 AE 0.6). Hydrophobic fibres functionalized only with perfluoroalkyl groups were stable to both acidic (pH 1) and basic (pH 12) environments. All surface chemistries demonstrated comparable or improved interfacial shear strength and these results correlated well with calculated values of interfacial shear stress, determined via molecular dynamics simulations