Ultraviolet and EUV studies of selected structures in the solar corona

New UV and EUV observations of off-limb and upper solar corona made by the UltraViolet Coronagraph Spectrometer (UVCS) and the Coronal Diagnostic Spectrometer (CDS) on SOHO (Solar and Heliospheric Observatory) are presented in this thesis. These data were used to establish the physical properties, such as temperature, density and element abundances, of different structures of the off-limb and upper corona. For this project, the UVCS team provided UV spectra of the extended solar corona, which included lines of primary interest for the characterization of this region and the solar wind. CDS data consisted of NIS (Normal Incidence Spectrometer) EUV spectra of the low corona. The data included several density-sensitive and temperature-sensitive lines which enabled diagnostic studies to be made. Absolute element abundances were derived from UVCS data; relative element abundances were derived from CDS data. The Differential Emission Measure (DEM) technique was used (for the first time on UVCS data) as the primary method for abundance study. Electron temperatures along the line of sight were derived applying the line ratio and the DEM techniques to both CDS and UVCS data. From the CDS data, electron densities along the line of sight were derived using the line ratio technique. For the UVCS data, the density was inferred using the 0 VI radiative and collisional components of the line. One equatorial and two mid-latitude streamers were observed with the two instruments, in the low corona and at about 1.6 R®. Electron density and temperature profiles with the solar distance were derived. They appeared to satisfy the hydrostatic equilibrium condition. The equatorial streamer appeared to be cooler than the mid-latitude one. Moreover, while the former tended to isothermal values already in the low corona, the latter was multithermal at the base and isothermal at 1.6 R®. The derived composition at 1.6 R®. showed a depletion with respect to the photospheric values for almost all the elements. The Fe/O ratio found here was consistent with values found in the solar wind. Moreover, a depletion in element composition with increasing solar distance was also found. While observing off-limb in the south polar coronal hole, CDS observations of a macrospicule were obtained. For the first time the background emission was isolated from that of the macrospicule itself, and a diagnostic study of both regions was made. The ambient coronal hole appeared to have a density of = 2 x 108 cm -3 that was about half the density found in the streamer base studied in this thesis. Multithermal components were found at the coronal hole base. The macrospicule spectrum indicated chromospheric and transition region temperatures, and fluctuations in density along the feature were registered. In particular, the data showed the presence of an outward-moving cloud of cool material. Its time evolution and velocity were studied. The maximum (initial) outflow velocity was about 80km s-1 , consistent with the outflow velocity measured in interplume regions. An off-limb hot loop system was observed with CDS at mid-latitude. Its top and base were selected for diagnostic studies. Some newly observed hot lines were identified. The loop system appeared to be composed of multi-thermal plasma. The highest temperature registered was log T=6.4 at the top of the loop. A depletion of element abundances which mainly involves the plasma at the top of the loop was found. A coronal hole bounded by a loop system was observed with CDS. Electron density appeared up to a factor two higher in the boundary than in the coronal hole, and the loop system appeared multi-thermal. The ambient coronal hole temperature appeared to be enhanced by the proximity of this loop arcade. Abundances were derived in both regions, and the coronal hole boundary showed slight depletions relative to photospheric values. New coordinated observations with CDS and UVCS were made during one of the SOlO-Ulysses quadratures. Preliminary results regarding temperatures and densities of the core and boundary regions of streamers were obtained from UVCS data

Evidence of widespread hot plasma in a non-flaring coronal active region from Hinode/XRT

Nanoflares, short and intense heat pulses within spatially unresolved magnetic strands, are now considered a leading candidate to solve the coronal heating problem. However, the frequent occurrence of nanoflares requires that flare-hot plasma be present in the corona at all times. Its detection has proved elusive until now, in part because the intensities are predicted to be very faint. Here we report on the analysis of an active region observed with five filters by Hinode/XRT in November 2006. We have used the filter ratio method to derive maps of temperature and emission measure both in soft and hard ratios. These maps are approximate in that the plasma is assumed to be isothermal along each line-of-sight. Nonetheless, the hardest available ratio reveals the clear presence of plasma around 10 MK. To obtain more detailed information about the plasma properties, we have performed Monte Carlo simulations assuming a variety of non-isothermal emission measure distributions along the lines-of-sight. We find that the observed filter ratios imply bi-modal distributions consisting of a strong cool (log T ~ 6.3-6.5) component and a weaker (few percent) and hotter (6.6 < log T < 7.2) component. The data are consistent with bi-modal distributions along all lines of sight, i.e., throughout the active region. We also find that the isothermal temperature inferred from a filter ratio depends sensitively on the precise temperature of the cool component. A slight shift of this component can cause the hot component to be obscured in a hard ratio measurement. Consequently, temperature maps made in hard and soft ratios tend to be anti-correlated. We conclude that this observation supports the presence of widespread nanoflaring activity in the active region.Comment: 12 figures, accepted for publication on refereed journa

Spectroscopy of very hot plasma in non-flaring parts of a solar limb active region: spatial and temporal properties

In this work we investigate the thermal structure of an off-limb active region in various non-flaring areas, as it provides key information on the way these structures are heated. In particular, we concentrate in the very hot component (>3 MK) as it is a crucial element to discriminate between different heating mechanisms. We present an analysis using Fe and Ca emission lines from both SOHO/SUMER and HINODE/EIS. A dataset covering all ionization stages from Fe X to Fe XIX has been used for the thermal analysis (both DEM and EM). Ca XIV is used for the SUMER-EIS radiometric cross-calibration. We show how the very hot plasma is present and persistent almost everywhere in the core of the limb AR. The off-limb AR is clearly structured in Fe XVIII. Almost everywhere, the EM analysis reveals plasma at 10 MK (visible in Fe XIX emission) which is down to 0.1% of EM of the main 3 MK plasma. We estimate the power law index of the hot tail of the EM to be between -8.5 and -4.4. However, we leave an open question on the possible existence of a small minor peak at around 10 MK. The absence in some part of the AR of Fe XIX and Fe XXIII lines (which fall into our spectral range) enables us to determine an upper limit on the EM at such temperatures. Our results include a new Ca XIV 943.59 \AA~ atomic model

On the spectroscopic detection of periodic plasma flows in loops undergoing thermal non-equilibrium

Context: Long-period intensity pulsations were recently detected in the EUV emission of coronal loops, and have been attributed to cycles of plasma evaporation and condensation driven by thermal non-equilibrium (TNE). Numerical simulations that reproduce this phenomenon also predict the formation of periodic flows of plasma at coronal temperatures along some of the pulsating loops. Aims: In this paper, we aim at detecting these predicted flows of coronal-temperature plasma in pulsating loops. Methods: To this end, we use time series of spatially resolved spectra from the EUV imaging spectrometer (EIS) onboard Hinode, and track the evolution of the Doppler velocity in loops in which intensity pulsations have previously been detected in images of SDO/AIA. Results: We measure signatures of flows that are compatible with the simulations, but only in a fraction of the observed events. We demonstrate that this low detection rate can be explained by line of sight ambiguities, combined with instrumental limitations such as low signal to noise ratio or insufficient cadence.Comment: Accepted for publication in A&A. 16 pages, 16 figure

Modeling the Radiative Signatures of Turbulent Heating in Coronal Loops

The statistical properties of the radiative signature of a coronal loop subject to turbulent heating obtained from a three-dimensional (3D) magnetohydrodynamics (MHD) model are studied. The heating and cooling of a multistrand loop is modeled and synthetic spectra for Fe XII 195.12, Fe XV 284.163, and Fe XIX 1118.06 ? are calculated, covering a wide temperature range. The results show that the statistical properties of the thermal and radiative energies partially reflect those of the heating function in that power-law distributions are transmitted, but with very significant changes in the power-law indices. There is a strong dependence on the subloop geometry. Only high-temperature radiation (?107 K) preserves reasonably precise information on the heating function

Impact of far-side structures observed by Solar Orbiter on coronal and heliospheric wind simulations

Solar Orbiter provides unique capabilities to understand the heliosphere. In particular, it has made observations of the far-side of the Sun and provides unique information to improve space weather monitoring. We aim to quantify how far-side data will affect simulations of the corona and the interplanetary medium, especially in the context of space weather forecasting. We focused on a time period with a single sunspot emerging on the far-side in February 2021. We used two different input magnetic maps: one with the far-side active region and one without. We used three different coronal models: a semi-empirical model (potential field source surface or PFSS) and two different magnetohydrodynamic models (Wind Predict and Wind Predict-AW). We compared all the models with both remote sensing and in situ observations. We find that the inclusion of the far-side active region in the various models has a small local impact due to the limited amount of flux of the sunspot (at most 8% of the total map flux), which leads to coronal hole changes of around 7% for all models. Interestingly, there is a more global impact on the magnetic structure seen in the current sheet, with clear changes in the coronal hole boundaries visible in extreme ultra-violet (EUV) on the western limb. For the Wind Predict-AW model, we demonstrate that the inclusion of the far-side data improves both the structure of the streamers and the connectivity to the spacecraft. In conclusion, the inclusion of a single far-side active region may have a small local effect with respect to the total magnetic flux, but it has global effects on the magnetic structure, and thus it must be taken into account to accurately describe the Sun-Earth connection. The flattening of the heliospheric current sheet for all models reveals an increase of the source surface height, which affects the open and closed magnetic field line distributions.Comment: 22 pages, 12 figures, accepted in A&

Microchemical and microscopic characterization of the pictorial quality of egg-tempera polyptych, late 14th century, Florence, Italy

This paper explores the added value of micro-chemical and microscopic approaches to gather scientific evidence that can technically explain the pictorial quality of an egg-tempera painting, and underpin assessments that otherwise would be based on naked eye observations only. Demonstration is here provided via the interdisciplinary investigation of the original technique used by Giovanni del Biondo in the polyptych Annunciation and Saints (1385 ca), Galleria dell'Accademia, Florence, Italy. The exquisite surface appearance makes this panel painting remarkable compared to artworks by coeval artists. Imaging techniques (UV, IR and IR false color), non-invasive single spot techniques (XRF and FORS spectrometry) and analytical investigations on eight selected micro-samples (ATR-FTIR, GC/MS and Py/GC–MS, ESEM-EDS) were combined to retrieve the palette and identify organic binding media and a superficial coating layer. Stratigraphic and micro-chemical data confirmed the use of a relatively simple egg-tempera technique applied on a ground made of gypsum mixed with animal glue, without complex stratigraphic superimposition of preparation and pictorial layers. Various pigments were identified, among which is the precious lapis lazuli. While Py/GC–MS highlight that the coating is made of dammar resin and honey mixed with animal glue, the results allow us to state that the painting was not intentionally varnished by Giovanni del Biondo. These outcomes shed a new light on the technical knowledge of this polyptych, and prove how challenging is the attempt to categorize egg-tempera recipes used by ancient painters at the turn of the 14th century

Validation of a wave heated 3D MHD coronal-wind model using Polarized Brightness and EUV observations

The physical properties responsible for the formation and evolution of the corona and heliosphere are still not completely understood. 3D MHD global modeling is a powerful tool to investigate all the possible candidate processes. To fully understand the role of each of them, we need a validation process where the output from the simulations is quantitatively compared to the observational data. In this work, we present the results from our validation process applied to the wave turbulence driven 3D MHD corona-wind model WindPredict-AW. At this stage of the model development, we focus the work to the coronal regime in quiescent condition. We analyze three simulations results, which differ by the boundary values. We use the 3D distributions of density and temperature, output from the simulations at the time of around the First Parker Solar Probe perihelion (during minimum of the solar activity), to synthesize both extreme ultraviolet (EUV) and white light polarized (WL pB) images to reproduce the observed solar corona. For these tests, we selected AIA 193 A, 211 A and 171 A EUV emissions, MLSO K-Cor and LASCO C2 pB images obtained the 6 and 7 November 2018. We then make quantitative comparisons of the disk and off limb corona. We show that our model is able to produce synthetic images comparable to those of the observed corona.Comment: in pres