Low Friction Flows of Liquids at Nanopatterned Interfaces

With the recent important development of microfluidic systems, miniaturization of flow devices has become a real challenge. Microchannels, however, are characterized by a large surface to volume ratio, so that surface properties strongly affect flow resistance in submicrometric devices. We present here results showing that the concerted effect of wetting . properties and surface roughness may considerably reduce friction of the fluid past the boundaries. The slippage of the fluid at the channel boundaries is shown to be drastically increased by using surfaces that are patterned at the nanometer scale. This effect occurs in the regime where the surface pattern is partially dewetted, in the spirit of the 'superhydrophobic' effects that have been recently discovered at the macroscopic scales. Our results show for the first time that, in contrast to the common belief, surface friction may be reduced by surface roughness. They also open the possibility of a controlled realization of the 'nanobubbles' that have long been suspected to play a role in interfacial slippag

Self-reported medication side effects in an older cohort living independently in the community - the Melbourne Longitudinal Study on Health Ageing (MELSHA) : cross-sectional analysis of prevalence and risk factors

Background Medication side effects are an important cause of morbidity, mortality and costs in older people. The aim of our study was to examine prevalence and risk factors for self-reported medication side effects in an older cohort living independently in the community.Methods The Melbourne Longitudinal Study on Healthy Ageing (MELSHA), collected information on those aged 65 years or older living independently in the community and commenced in 1994. Data on medication side effects was collected from the baseline cohort (n = 1000) in face-to-face baseline interviews in 1994 and analysed as cross-sectional data. Risk factors examined were: socio-demographics, health status and medical conditions; medication use and health service factors. Analysis included univariate logistic regression to estimate unadjusted risk and multivariate logistic regression analysis to assess confounding and estimate adjusted risk.Results Self-reported medication side effects were reported by approximately 6.7% (67/1000) of the entire baseline MELSHA cohort, and by 8.5% (65/761) of those on medication. Identified risk factors were increased education level, co-morbidities and health service factors including recency of visiting the pharmacist, attending younger doctors, and their doctor\u27s awareness of their medications. The greatest increase in risk for medication side effects was associated with liver problems and their doctor\u27s awareness of their medications. Aging and gender were not risk factors.Conclusion Prevalence of self-reported medication side effects was comparable with that reported in adults attending General Practices in a primary care setting in Australia. The prevalence and identified risk factors provide further insight and opportunity to develop strategies to address the problem of medication side effects in older people living independently in the community setting. <br /

Simulations of extensional flow in microrheometric devices

We present a detailed numerical study of the flow of a Newtonian fluid through microrheometric devices featuring a sudden contraction–expansion. This flow configuration is typically used to generate extensional deformations and high strain rates. The excess pressure drop resulting from the converging and diverging flow is an important dynamic measure to quantify if the device is intended to be used as a microfluidic extensional rheometer. To explore this idea, we examine the effect of the contraction length, aspect ratio and Reynolds number on the flow kinematics and resulting pressure field. Analysis of the computed velocity and pressure fields show that, for typical experimental conditions used in microfluidic devices, the steady flow is highly three-dimensional with open spiraling vortical structures in the stagnant corner regions. The numerical simulations of the local kinematics and global pressure drop are in good agreement with experimental results. The device aspect ratio is shown to have a strong impact on the flow and consequently on the excess pressure drop, which is quantified in terms of the dimensionless Couette and Bagley correction factors. We suggest an approach for calculating the Bagley correction which may be especially appropriate for planar microchannels

Load carrying capacity of a heterogeneous surface bearing

It has been shown before that liquids can slip at a solid boundary, which prompted the idea that parallel-surfaces bearings can be achieved just by alternating slip and non-slip regions in the direction of fluid flow. The amount of slip at the wall depends on the surface tension at the liquid–solid interface, which in turn depends on the chemical state of the surface and its roughness. In the present study a heterogeneous surface was obtained by coating half of a circular glass disc with a coating repellant to glycerol. A rotating glass disc was placed at a known/calibrated distance and the gap was filled with glycerol. With the mobile surface moving from the direction of slip to non-slip region it can be theoretically shown that a pressure build up can be achieved. The pressure gradient in the two regions is constant, similar to that in a Rayleigh step bearing, with the maximum pressure at the separation line. The heterogeneous disc was placed on a holder supported by a load cell thus the force generated by this pressure increase can be measured accurately. Tests were carried out at different sliding speeds and gaps and the load carried was measured and subsequently compared with theoretical calculations. This allowed the slip coefficient to be evaluated

OT J002656.6+284933 (CSS101212:002657+284933): An SU UMa-type dwarf nova with the longest superhump period

© The Author 2017. Published by Oxford University Press on behalf of the Astronomical Society of Japan. All rights reserved. For Permissions, please email:. We observed the 2016 outburst of OT J002656.6+284933 (CSS101212:002657+284933) and found that it has the longest recorded [0.13225(1) d on average] superhumps among SU UMa-type dwarf novae. The object is the third known SU UMa-type dwarf nova above the period gap. The outburst, however, was unlike ordinary long-period SU UMa-type dwarf novae in that it s howed two post-outburst rebrightenings. It showed superhump evolution similar to short-period SU UMa-type dwarf novae. We could constrain the mass ratio to less than 0.15 (most likely between 0.10 and 0.15) by using superhump periods in the early and post-superoutburst stages. These results suggest the possibility that OT J002656.6+284933 has an anomalously undermassive secondary and it should have followed a different evolutionary track from the standard one