123 research outputs found
First Study of the Pyrolysis of a Halogenated Ester: Methyl Chloroacetate
International audienceThe pyrolysis of a halogenated ester, methyl chloroacetate (MC), under dilute atmosphere and quasi-atmospheric pressure was studied at temperatures from 473 to 1048 K using an alumina tubular reactor. MC was chosen as a surrogate to model the thermal decomposition of ethyl bromoacetate, a chemical warfare agent. A maximum MC conversion of 99.8% was observed at a residence time of 2 s, a temperature of 1048 K, and an inlet mole fraction of 0.01. The following products were quantified: CO, CO2, HCl, methane, ethylene, ethane, propene, chloromethane, dichloromethane, vinyl chloride, chloroethane, and dichloroethane. For the first time, a detailed kinetic model of MC pyrolysis was developed and gave a good prediction of the global reactivity and the formation of most of the major products. Flow rate and sensitivity analyses were made to highlight the different pathways of decomposition during the MC pyrolysis. In a first attempt to extrapolate the results obtained with methyl chloroacetate to ethyl bromoacetate, simulations were run with a modified version of the model developed in this study taking into account the differences in bond dissociation energies induced by the change of the chlorine atom by a bromine one
The role of chemistry in the oscillating combustion of hydrocarbons : an experimental and theoretical study
The stable operation of low-temperature combustion processes is an open challenge, due to the presence of undesired deviations from steady-state conditions: among them, oscillatory behaviors have been raising significant interest. In this work, the establishment of limit cycles during the combustion of hydrocarbons in a wellstirred reactor was analyzed to investigate the role of chemistry in such phenomena. An experimental investigation of methane oxidation in dilute conditions was carried out, thus creating quasi-isothermal conditions and decoupling kinetic effects from thermal ones. The transient evolution of the mole fractions of the major species was obtained for different dilution levels (0.0025 <= X-CH4 <= 0.025), inlet temperatures (1080K <= T <= 1190K) and equivalence ratios (0.75 <= Phi <= 1). Rate of production analysis and sensitivity analysis on a fundamental kinetic model allowed to identify the role of the dominating recombination reactions, first driving ignition, then causing extinction.
A bifurcation analysis provided further insight in the major role of these reactions for the reactor stability. One-parameter continuation allowed to identify a temperature range where a single, unstable solution exists, and where oscillations were actually observed. Multiple unstable states were identified below the upper branch, where the stable (cold) solution is preferred. The role of recombination reactions in determining the width of the unstable region could be captured, and bifurcation analysis showed that, by decreasing their strength, the unstable range was progressively reduced, up to the full disappearance of oscillations. This affected also the oxidation of heavier hydrocarbons, like ethylene. Finally, less dilute conditions were analyzed using propane as fuel: the coupling with heat exchange resulted in multiple Hopf Bifurcations, with the consequent formation of intermediate, stable regions within the instability range in agreement with the experimental observations
Study of oscillations during methane oxidation with species probing
Biogas has been considered as a renewable energy source with respect to fossil fuels due to its
sustainability, security supply, and environmental friendly potential [1-4]. Methane occupies a
large part in biogas. It is of great value to review the methane oxidation for a primary understanding
of the features associated with biogas combustion. It was found that dynamic behavior
in terms of methane oxidation occurred under specific conditions. The first methane oxidation
oscillation experiments were conducted by [5] in a jet-stirred reactor (JSR) and were extended
to a higher inlet temperature [6]. The map of dynamic behavior was drawn in terms of various
C/O ratios and temperatures ranging from 1025-1275 K at a fixed 90% nitrogen bath gas. Recently,
Lubrano Lavadera et al. [7] investigated the main parameters, such as, equivalence ratios
(0.5-1.5), residence time (1.5-2 s), various bath gases (N2, CO2, He, H2O), on the oscillatory
behavior of methane oxidation. However, to our best knowledge, studies of dynamic phenomenology
with species probing have never been reported.
Because of the heat release in terms of the exothermic or endothermic reactions, the temperature
and species oscillations are strongly coupled during fuel oxidation. In order to put emphasis on
species dynamic behavior, very diluted conditions are needed to decouple as much as possible
temperature and species oscillations.
The purpose of this work is to investigate the effects of various parameters: inlet mole fraction
of methane (0.1-0.5%), stoichiometric condition (=1) and reactor temperatures (950-1200 K),
on the species oscillations during methane oxidation. A detailed kinetic mechanism (POLIMI)
[8] is selected to interpret the experimental data
An experimental and kinetic modeling study of NH3 oxidation in a Jet Stirred Reactor
The increasing interest towards renewable, and more sustainable energy sources imposes a widerange
analysis of the underlying chemistry, in order to maximize the efficiency of combustion
devices and reduce pollutant emissions. In this context, ammonia chemistry has recently gained
major attention: it is present in biogas and bio-oil, in trace amounts. Investigating ammonia
chemistry can benefit from several studies carried out in the past decades on its pyrolysis and
oxidation behavior. However, scarce literature is available on the conditions of interest previously
mentioned, since the presence of ammonia in trace amounts results in superoxidative conditions.
The available kinetic models of ammonia have been built up by mostly relying on hightemperature
data, obtained in ideal reactors. On the other side, few work has been carried out
to investigate its oxidation at lower temperatures.
In order to further investigate this topic, and to provide a stronger support for kinetic model
validation, in this study the oxidation of ammonia in diluted conditions, at relatively low temperatures
(T < 1200 K) and a pressure close to atmospheric, is investigated by using a Jet Stirred
Reactor. In addition to ammonia conversion, the formation of Nitrogen Oxides (NOx) is also
analyzed. At the same time, a detailed kinetic mechanism for ammonia oxidation is developed
by leveraging the most recently available kinetic data on experimental and theoretical reaction
rates, and is used to analyze the obtained data, after being validated against the literature data in
similar conditions
Experimental and modelling study of the oxidation of methane doped with ammonia
The oxidation of methane doped with ammonia was experimentally and theoretically studied in order to better
understand the interactions between these two molecules in combustion processes fed with biogas. Experiments were
carried out in a jet-stirred reactor. Several diagnostics were used to quantify reaction products: gas chromatograph for
carbon containing species, a NOx analyzer for NO and NO2, and continuous-wave cavity ring-down spectroscopy for
ammonia. Experimental data were satisfactorily compared with data computed using a model developed by
Politecnico di Milano
- …