20,197 research outputs found
Numerical Range and the Dynamics of a Rational Function
Sometimes we obtain attractive results when associating facts to simple
elements. The goal of this work is to introduce a possible alternative in the
study of the dynamics of rational maps
Experimental response of RC columns built with plain bars under unidirectional cyclic loading
A large number of existing reinforced concrete (RC) buildings structures were designed and built before mid-70’s, when the reinforcing bars had plain surface and prior to the enforcement of the modern seismic-oriented design philosophies.
This paper describes a series of unidirectional cyclic tests performed on seven full-scale columns built with plain reinforcing bars, without adequate reinforcement detailing for seismic demands. The specimens have different reinforcing steel details and different cross sections. A further monotonic test was also carried out for one of the specimens and an additional column, built with deformed bars, was cyclically tested for comparison with the results for the specimens with plain bars. The main experimental results are presented and discussed. The influence of bond properties on the column behaviour is evidenced by differences observed between the cyclic response of similar specimens with plain and deformed bars. The influence of reinforcement amount and displacement history on the column response is also investigated
Experimental and numerical analysis of the cyclic behaviour of RC beam-column connections with plain reinforcing bars
The information available in the literature about the cyclic behaviour of reinforced concrete elements with plain reinforcing bars is scarce. As a consequence, the influence of bar slippage in elements with plain bars is not yet comprehensively understood. In this paper are presented and discussed the main results of the cyclic tests carried out on five full-scale reinforced concrete beam-column joints with plain bars and without specific detailing for seismic demands. An additional joint specimen with deformed bars was also tested for comparison. Furthermore, numerical models were built to simulate the response of two of the specimens. Particular attention was given to the influence of bar slippage. The results of the conducted analyses underline the importance of accounting for bond-slip in the numerical modelling of elements with plain bars and also highlight the need for specific models to simulate the effects of this mechanism in the presence of plain bars
Cyclic response of RC beam-column joints reinforced with plain bars: an experimental testing campaign
Existing reinforced concrete (RC) buildings constructed until the mid-70’s, with plain reinforcing bars, are expected to behave poorly when subjected to earthquake actions. This paper describes an experimental program designed to investigate the influence of poor detailing on the cyclic behaviour of RC beam-column joint elements.
Cyclic tests were performed on five interior and five exterior full-scale beam-column joints with different detailing characteristics and reinforced with plain bars. An additional joint of each type was built with deformed bars for an evaluation of the influence of bond properties on the cyclic response of the structural element. The force-displacement global response, energy dissipation, equivalent damping and damage behaviour of the joints was investigated and the main results are presented and discussed. The experimental results indicate that the bond-slip mechanism has significantly influenced the cyclic response of the beam-column joints. The specimens built with plain bars showed lower energy dissipation, stiffness and equivalent damping
About a Coincidente Index for the State of the Economy
The construction of coincident indexes for the economic activity of a country is a common practice since the fifties. The methodologies vary from heuristic methods to probabilistic or statistical ones. In this paper, we present a new procedure for estimating a coincient index of the state of the economy which is optimum in a statiscal sense. This procedure is based on state space models that do possess the steady-state property.We apply our methodology for computing a coincident index for the Colombian economy.State of the economy, Coincidente Index, State Space Models.
Nonlinear modeling of the cyclic response of RC columns
Cyclic load reversals (like those induced by earthquakes) result in accelerated bond degradation, leading to significant bar slippage. The bond-slip mechanism is reported to be one of the most common causes of damage and even collapse of existing RC structures subjected to earthquake loading. RC structures with plain reinforcing bars, designed and built prior to the enforcement of the modern seismic-oriented design philosophies, are particularly sensitive to bond degradation. However, perfect bond conditions are typically assumed in the numerical analysis of RC structures. This paper describes the numerical modeling of the cyclic response of two RC columns, one built with deformed bars and the other with plain bars and structural detailing similar to that typically adopted in pre-1970s structures. For each column, different modeling strategies to simulate the column response were tested. Models were built using the OpenSees and the SeismoStruct platforms, and calibrated with the available tests results. Within each platform, different types of nonlinear elements were used to represent the columns. Bond-slip effects were included in the OpenSees models resorting to a simple modeling strategy. The models and the parameters adopted are presented and discussed. Comparison is established between the most relevant experimental results and the corresponding results provided by the numerical models. Conclusions are drawn about the capacity of the tested models to simulate the columns response and about the influence of considering or not considering the effects of bars slippage
Adjustment and income distribution : a counterfactual analysis
This paper presents model simulations to quantify the effects of different stabilization packages in the distribution of income and wealth. The simulations suggest that a sharply contractionary stabilization package has a major adverse impact on the distribution of income. The shifts in distribution are likely to make the package less sustainable. The simulations support the view that stabilization packages which do not have specific components targeted to the poor will redistribute income in a way that, although transitory, is likely to permanently harm those below the poverty line - in terms of things like nutrition, health, and education. The sharp redistributive effects of stabilization packages that omit specific targeted policies to alleviate poverty are also likely to endanger the sustainability of the adjustment package.Economic Theory&Research,Environmental Economics&Policies,Economic Stabilization,Banks&Banking Reform,Inequality
Fundraising and vote distribution: a non-equilibrium statistical approach
The number of votes correlates strongly with the money spent in a campaign,
but the relation between the two is not straightforward. Among other factors,
the output of a ballot depends on the number of candidates, voters, and
available resources. Here, we develop a conceptual framework based on Shannon
entropy maximization and Superstatistics to establish a relation between the
distributions of money spent by candidates and their votes. By establishing
such a relation, we provide a tool to predict the outcome of a ballot and to
alert for possible misconduct either in the report of fundraising and spending
of campaigns or on vote counting. As an example, we consider real data from a
proportional election with candidates, where a detailed data
verification is virtually impossible, and show that the number of potential
misconducting candidates to audit can be reduced to only nine
Evidence from stellar rotation of enhanced disc dispersal: (I) The case of the triple visual system BD-21 1074 in the Pictoris association
The early stage of stellar evolution is characterized by a star-disc locking
mechanism. The disc-locking prevents the star to spin its rotation up, and its
timescale depends on the disc lifetime. Some mechanisms can significantly
shorten this lifetime, allowing a few stars to start spinning up much earlier
than other stars. In the present study, we aim to investigate how the
properties of the circumstellar environment can shorten the disc lifetime. We
have identified a few multiple stellar systems, composed of stars with similar
masses, which belong to associations with a known age. Since all parameters
that are responsible for the rotational evolution, with the exception of
environment properties and initial stellar rotation, are similar for all
components, we expect that significant differences among the rotation periods
can only arise from differences in the disc lifetimes. A photometric timeseries
allowed us to measure the rotation periods of each component, while
high-resolution spectra provided us with the fundamental parameters,
and chromospheric line fluxes. The rotation periods of the components differ
significantly, and the component B, which has a closer companion C, rotates
faster than the more distant and isolated component A. We can ascribe the
rotation period difference to either different initial rotation periods or
different disc-locking phases arising from the presence of the close companion
C. In the specific case of BD21 1074, the second scenario seems to be more
favored. In our hypothesis of different disc-locking phase, any planet orbiting
this star is likely formed very rapidly owing to a gravitational instability
mechanism, rather than core accretion. Only a large difference of initial
rotation periods alone could account for the observed period difference,
leaving comparable disc lifetimes.Comment: Accepted by Astronomy & Astrophysics on July 31, 2014; Pages 12,
Figs.
- …