531 research outputs found
Inorganic spark chamber frame and method of making the same
A spark chamber frame, manufactured using only inorganic materials is described. The spark chamber frame includes a plurality of beams formed from inorganic material, such as ceramic or glass, and are connected together at ends with inorganic bonding material having substantially the same thermal expansion as the beam material. A plurality of wires formed from an inorganic composition are positioned between opposed beams so that the wires are uniformly spaced and form a grid. A plurality of hold down straps are formed of inorganic material such as ceramic or glass having substantially the same chemical and thermal properties as the beam material. Hold down straps overlie wires extending over the beams and are bonded thereto with inorganic bonding material
An equation that describes material outgassing for contamination modeling
A generalization of the Clausius-Claperon equation for vapor pressure is made for an outgassing material. The expression is derived using Langmuir's equation for the outgassing rate of a material and using an empirical equation for the vapor pressure of a material as a function of its molecular weight and temperature. Also, outgassing rate equations are derived in terms of the vapor pressure of the outgassing material for three general geometries
Phenomenological and statistical analysis of fracture in polycrystalline aluminum oxide
Phenomenological and statistical analysis of fracture in polycrystalline aluminum oxid
The effects of particle size on the optical properties and surface roughness of a glass-balloon-filled black paint
The effects of particle size on the optical properties and surface roughness of a glass-balloon-filled, carbon-pigmented paint were studied in order to develop a diffuse-reflecting, low-total-reflectance, low-outgassing black paint. Particle sizes ranged between 20 microns and 74 microns. Surface roughness was found to increase with increasing particle size. Relative total reflectance at near-normal incidence (MgO standard) of the filled paints was less than for the unfilled paint between 230 nm and 1800 nm. Total absolute reflectance at 546 nm decreased with increasing particle size at grazing angles of incidence. Near-normal, total emittance was greater for the filled paints than for the unfilled paint. Specularity decreased with increasing particle size over the range studied
A method for developing design diagrams for ceramic and glass materials using fatigue data
The service lifetime of glass and ceramic materials can be expressed as a plot of time-to-failure versus applied stress whose plot is parametric in percent probability of failure. This type of plot is called a design diagram. Confidence interval estimates for such plots depend on the type of test that is used to generate the data, on assumptions made concerning the statistical distribution of the test results, and on the type of analysis used. This report outlines the development of design diagrams for glass and ceramic materials in engineering terms using static or dynamic fatigue tests, assuming either no particular statistical distribution of test results or a Weibull distribution and using either median value or homologous ratio analysis of the test results
Preventing Cracking of Anodized Coatings
Anodized coatings have been used as optical and thermal surfaces in spacecraft. Particulate contamination from cracked coatings is a concern for many applications. The major cause for the cracking is the difference in the coefficient of thermal expansion between the oxide coatings and the aluminum substrate. The loss of water when the coating is exposed to a vacuum also could induce cracking of the coating. Hot-water sealing was identified as the major cause for the cracking of the coatings because of the large temperature change when the parts were immersed in boiling water and the water was absorbed in the coating. when the hot-water sealing process was eliminated, the cracking resistance of the anodized coatings was greatly improved. Also, it was found that dyed black coatings were more susceptible than clear coatings to cracking during thermo-vacuum cyclings
Psychometric properties of the five-level EuroQoL-5 dimension and Short Form-6 dimension measures of health-related quality of life in a population of pregnant women with depression
BACKGROUND: Although evidence suggests that the EuroQoL-5 dimension (EQ-5D) and Short Form-6 dimension (SF-6D) have equivalent psychometric properties in people with depression, there is some evidence that the EQ-5D may lack responsiveness in certain populations with depression. AIMS: To examine the psychometric properties of the five-level EQ-5D (EQ-5D-5L) and SF-6D measures of health-related quality of life in a representative sample of pregnant women with depression. METHOD: Data were taken from a cohort of pregnant women identified at or soon after the first antenatal care contact and followed-up at 3 months postpartum. Health-related quality of life was measured using both the EQ-5D-5L and the SF-6D at baseline and follow-up. We examined acceptability and conducted psychometric validation in the aspects of concurrent validity, convergent validity, known-group validity and responsiveness in 421 women with available data. RESULTS: The EQ-5D-5L and SF-6D have similarly high levels of acceptability. However, concurrent validation shows a lack of concordance between the EQ-5D-5L and SF-6D. The EQ-5D-5L tends to be higher than the SF-6D in individuals with better health states. The SF-6D tends to be higher than EQ-5D-5L in individuals with poorer health states. Convergent and known-group validity are comparable between the two utility measures. Longitudinally, women who recovered show larger increase in SF-6D utilities than those who did not recover at follow-up. With the EQ-5D-5L, this is not the case. Additionally, the ceiling effects were more apparent in the EQ-5D-5L. CONCLUSIONS: The effectiveness of perinatal mental health interventions may be better captured by the SF-6D than the EQ-5D-5L but this needs to be cross-validated in more studies. DECLARATION OF INTEREST: L.M.H. chaired the National Institute for Health and Care Excellence CG192 guidelines development group on antenatal and postnatal mental health in 2012-2014. L.M.H. reports grants from NIHR, MRC, Nuffield and the Stefanou Foundation, UK. K.T., M.H. and S.B. report funding by NIHR and the Stefanou Foundation, UK
Guidance for researchers wanting to link NHS data using non-consent approaches: a thematic analysis of feedback from the Health Research Authority Confidentiality Advisory Group
Introduction: The use of linked data and non-consent methodologies is a rapidly growing area of health research due to the increasing detail, availability and scope of routinely collected electronic health records data. However, gaining the necessary legal and governance approvals to undertake data linkage is a complex process in England. /
Objectives: We reflect on our own experience of establishing lawful basis for data linkage through Section 251 approval, with the intention to build a knowledgebase of practical advice for future applicants. /
Methods: Thematic analysis was conducted on a corpus of Section 251 feedback reports from the NHS Health Research Authority Confidentiality Advisory Group. /
Results: Four themes emerged from the feedback. These were: (a) Patient and Public Involvement, (b)~Establishing Rationale, (c) Data maintenance and contingency, and the need to gain (d) Further Permissions from external authorities prior to full approval. /
Conclusions: Securing Section 251 approval poses ethical, practical and governance challenges. However, through a comprehensive, planned approach Section 251 approval is possible, enabling researchers to unlock the potential of linked data for the purposes of health research
The effect of relationship status on communicating emotions through touch
Research into emotional communication to date has largely focused on facial and vocal expressions. In contrast, recent studies by Hertenstein, Keltner, App, Bulleit, and Jaskolka (2006) and Hertenstein, Holmes, McCullough, and Keltner (2009) exploring nonverbal communication of emotion discovered that people could identify anger, disgust, fear, gratitude, happiness, love, sadness and sympathy from the experience of being touched on either the arm or body by a stranger, without seeing the touch. The study showed that strangers were unable to communicate the self-focused emotions embarrassment, envy and pride, or the universal emotion surprise. Literature relating to touch indicates that the interpretation of a tactile experience is significantly influenced by the relationship between the touchers (Coan, Schaefer, & Davidson, 2006). The present study compared the ability of romantic couples and strangers to communicate emotions solely via touch. Results showed that both strangers and romantic couples were able to communicate universal and prosocial emotions, whereas only romantic couples were able to communicate the self-focused emotions envy and pride
Recommended from our members
Web-Based Skin Cancer Prevention Training for Massage Therapists: Protocol for the Massage Therapists Skin Health Awareness, Referral, and Education Study
Background: Skin cancer, the most common cancer in the United States, is costly and potentially deadly. Its burden can be reduced by early detection and prevention activities. The scope of skin cancer requires going beyond traditional health care providers to promote risk reduction. Partnering with the nonbiomedical workforce, such as massage therapists (MTs), may reach more individuals at risk. MTs see much of their clients' skin and are amenable to performing skin cancer risk reduction activities during massage appointments. Objective: The objective of this study is to describe the Massage Therapists Skin Health Awareness, Referral, and Education protocol, presenting an overview of our systematic approach to developing rigorous e-training for MTs to enable them to be partners in skin cancer risk reduction. We also describe procedures for usability and feasibility testing of the training. Methods: We developed an integrated electronic learning system that includes electronic training (e-training) technology, simulated client interactions, online data collection instruments, and in-person assessment of MTs' application of their training. Results: A total of 20 participants nationally scored the e-training as high for usability and satisfaction. We have screened an additional 77 MTs in Arizona for interest and eligibility, and currently have 37 enrolled participants, of whom 32 have completed the Web-based training. Conclusions: The structured and rigorous development approach for this skin cancer risk reduction and brief behavioral intervention e-training for MTs begins to fill a gap in skin cancer risk reduction research. Iterative usability testing of our asynchronous Web-based training resulted in positive participant response. Our e-training approach offers greater learner accessibility, increased convenience, and greater scalability than the few existing programs and has the potential to reach many MTs nationally.Arizona Biomedical Research Centre through the Arizona Department of Health Services [ABRC/ADHS16-162518]; National Institutes of Health-National Cancer Institute (NIH-NCI) Cancer Center Support Grant [P30 CA023074]open access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
- …