86 research outputs found
Recommended from our members
PetroPlot: A plotting and data management tool set for Microsoft Excel
PetroPlot is a 4000-line software code written in Visual Basic for the spreadsheet program Excel that automates plotting and data management tasks for large amount of data. The major plotting functions include: automation of large numbers of multiseries XY plots; normalized diagrams (e.g., spider diagrams); replotting of any complex formatted diagram with multiple series for any other axis parameters; addition of customized labels for individual data points; and labeling flexible log scale axes. Other functions include: assignment of groups for samples based on multiple customized criteria; removal of nonnumeric values; calculation of averages/standard deviations; calculation of correlation matrices; deletion of nonconsecutive rows; and compilation of multiple rows of data for a single sample to single rows appropriate for plotting. A cubic spline function permits curve fitting to complex time series, and comparison of data to the fits. For users of Excel, PetroPlot increases efficiency of data manipulation and visualization by orders of magnitude and allows exploration of large data sets that would not be possible making plots individually. The source codes are open to all users
Recommended from our members
Feedback Between Deglaciation, Volcanism, and Atmospheric CO2
An evaluation of the historical record of volcanic eruptions shows that subaerial volcanism increases globally by two to six times above background levels between 12 ka and 7 ka, during the last deglaciation. Increased volcanism occurs in deglaciating regions. Causal mechanisms could include an increase in magma production owing to the mantle decompression caused by ablation of glaciers and ice caps or a more general pacing of when eruptions occur by the glacial variability. A corollary is that ocean ridge volcanic production should decrease with the rising sea level during deglaciation, with the greatest effect at slow spreading ridges.
CO2 output from the increased subaerial volcanism appears large enough to influence glacial/interglacial CO2 variations. We estimate subaerial emissions during deglaciation to be between 1000 and 5000 Gt of CO2 above the long term average background flux, assuming that emissions are proportional to the frequency of eruptions. After accounting for equilibration with the ocean, this additional CO2 flux is consistent in timing and magnitude with ice core observations of a 40 ppm increase in atmospheric CO2 concentration during the second half of the last deglaciation. Estimated decreases in CO2 output from ocean ridge volcanoes compensate for only 20% of the increased subaerial flux.
If such a large volcanic output of CO2 occurs, then volcanism forges a positive feedback between glacial variability and atmospheric CO2 concentrations: deglaciation increases volcanic eruptions, raises atmospheric CO2, and causes more deglaciation. Such a positive feedback may contribute to the rapid passage from glacial to interglacial periods. Conversely, waning volcanic activity during an interglacial could lead to a reduction in CO2 and the onset of an ice age. Whereas glacial/interglacial variations in CO2 are generally attributed to oceanic mechanisms, it is suggested that the vast carbon reservoirs associated with the solid Earth may also play an important role.Earth and Planetary Science
Origins of chemical diversity of back-arc basin basalts: a segment-scale study of the Eastern Lau Spreading Center
We report major, trace, and volatile element data on basaltic glasses from the northernmost segment of the Eastern Lau Spreading Center (ELSC1) in the Lau back-arc basin to further test and constrain models of back-arc volcanism. The zero-age samples come from 47 precisely collected stations from an 85 km length spreading center. The chemical data covary similarly to other back-arc systems but with tighter correlations and well-developed spatial systematics. We confirm a correlation between volatile content and apparent extent of melting of the mantle source but also show that the data cannot be reproduced by the model of isobaric addition of water that has been broadly applied to back-arc basins. The new data also confirm that there is no relationship between mantle temperature and the wet melting productivity. Two distinct magmatic provinces can be identified along the ELSC1 axis, a southern province influenced by a âwet componentâ with strong affinities to arc volcanism and a northern province influenced by a âdamp componentâ intermediate between enriched mid-ocean ridge basalts (E-MORB) and arc basalts. Highâfield strength elements and rare earth elements are all mobilized to some extent by the wet component, and the detailed composition of this component is determined. It differs in significant ways from the Mariana component reported by E. Stolper and S. Newman (1994), particularly by having lower abundances of most elements relative to H_(2)O. The differences can be explained if the slab temperature is higher for the Mariana and the source from which the fluid is derived is more enriched. The ELSC1 damp component is best explained by mixing between the wet component and an E-MORB-like component. We propose that mixing between water-rich fluids and low-degree silicate melts occurs at depth in the subduction zone to generate the chemical diversity of the ELSC1 subduction components. These modified sources then rise independently to the surface and melt, and these melts mix with melts of the background mantle from the ridge melting regime to generate the linear data arrays characteristic of back-arc basalts. The major and trace element framework for ELSC1, combined with different slab temperatures and compositions for difference convergent margins, may be able to be applied to other back-arc basins around the globe
Glacial cycles drive variations in the production of oceanic crust
Glacial cycles redistribute water between oceans and continents causing
pressure changes in the upper mantle, with consequences for melting of Earth's
interior. Using Plio-Pleistocene sea-level variations as a forcing function,
theoretical models of mid-ocean ridge dynamics that include melt transport
predict temporal variations in crustal thickness of hundreds of meters. New
bathymetry from the Australian-Antarctic ridge shows significant spectral
energy near the Milankovitch periods of 23, 41, and 100 ky, consistent with
model predictions. These results suggest that abyssal hills, one of the most
common bathymetric features on Earth, record the magmatic response to changes
in sea level. The models and data support a link between glacial cycles at the
surface and mantle melting at depth, recorded in the bathymetric fabric of the
sea floor.Comment: 30 pages, 6 figures (including supplementary information).
Resubmitted to Science on 12 December 201
Recommended from our members
Insights into the Mechanism of Intermediate-Depth Earthquakes from Source Properties as Imaged by Back Projection of Multiple Seismic Phases
This study investigates the spatial and temporal distribution of energy release of large, intermediate-depth earthquakes using a modified back projection technique first used to study the 2004 Sumatra-Andaman megathrust event. Multiple seismic phases are included in the back projection analysis, which provides the capability to determine the energy distribution with respect to depth and time. A total of 22 intermediate-depth earthquakes with moment magnitudes greater than or equal to 6.5 are investigated with hypocentral depths between 100 and 300 km. For most of these events, the vertical extent of energy release is either below the resolution of this study or slightly above . This observation agrees with previous studies that find large, intermediate-depth earthquakes have subhorizontal rupture planes. The results also show a significant portion of the events have multiple rupture planes that are well separated in depth. The closeness in time of the ruptures on separate planes and the distance between the planes suggest dynamic triggering where the P waves from the first rupture initiate rupture on the second plane. We propose that a dehydration embrittlement mechanism combined with preferentially hydrated subhorizontal faults can explain the observations of dominant subhorizontal rupture planes and the frequent occurrence of rupture complexity involving multiple subevents.Earth and Planetary Science
Volcanic glasses at the Izu arc volcanic front : new perspectives on fluid and sediment melt recycling in subduction zones
Author Posting. Š American Geophysical Union, 2004. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry Geophysics Geosystems 5 (2004): Q01007, doi:10.1029/2002GC000408.Volcanic glasses contained in distal fallout tephras from the Izu arc volcanic front (Izu VF) provide unique perspectives on general problems of arc volcanism. Unlike cogenetic lavas, these glasses are liquid compositions where element concentrations as well as ratios have significance. Isotopic evidence and previous work show that there is no sediment melt contribution to the sources of the Izu VF tephras, and hence their trace element characteristics permit determination of the trace element contents of slab fluids. The slab fluid is a composite of metasediment (âź5% of total fluid) and metabasalt (âź95%) component fluids, and carries large ion lithophile elements (LILE) with high LILE/Th and LILE/U, and low Th and U relative to source. Except for Sr and K, the metabasalt fluid is much less enriched than the metasediment fluid, but its large relative proportions make it an important carrier of many trace elements. The metabasalt fluid has the characteristics of the arc trace element signature, obviating the need for ubiquitous involvement of sediment in arc magma genesis. The fluid component in the tephras is remarkably constant in composition over fifteen million years, and hence appears to be a robust composition that may be applicable to other convergent margins. Assuming that the metabasalt fluid is a common component, and that distribution coefficients between sediment and fluid are similar from one arc to another, composite fluid compositions can be estimated for other arcs. Differences from this composition then would likely result from a sediment melt component. Comparison to arcs with sediment melt components in their source (Marianas, eastern Aleutians) shows that partial sediment melts may be so enriched, that they can completely mask the signature of the comingling slab fluids. Hence sediment melts can easily dominate the trace element and isotopic signature of many convergent margins. Since sediment melts inherit the LILE/LILE ratios of the trench sediment, Earth's surface processes must eventually influence the compositional diversity of arcs.This study was funded by the âDeutsche Forschungsgemeinschaftâ (grants Str 441/3 and 441/4). The Northeast National Ion Microprobe Facility at WHOI was supported by grants EAR-9628749 and EAR-990440 from the National Science Foundation
Recommended from our members
Origins of Chemical Diversity of Back-Arc Basin Basalts: A Segment-Scale Study of the Eastern Lau Spreading Center
We report major, trace, and volatile element data on basaltic glasses from the northernmost segment of the Eastern Lau Spreading Center (ELSC1) in the Lau back-arc basin to further test and constrain models of back-arc volcanism. The zero-age samples come from 47 precisely collected stations from an 85 km length spreading center. The chemical data covary similarly to other back-arc systems but with tighter correlations and well-developed spatial systematics. We confirm a correlation between volatile content and apparent extent of melting of the mantle source but also show that the data cannot be reproduced by the model of isobaric addition of water that has been broadly applied to back-arc basins. The new data also confirm that there is no relationship between mantle temperature and the wet melting productivity. Two distinct magmatic provinces can be identified along the ELSC1 axis, a southern province influenced by a wet component with strong affinities to arc volcanism and a northern province influenced by a damp component intermediate between enriched mid-ocean ridge basalts (E-MORB) and arc basalts. High field strength elements and rare earth elements are all mobilized to some extent by the wet component, and the detailed composition of this component is determined. It differs in significant ways from the Mariana component reported by E. Stolper and S. Newman (1994), particularly by having lower abundances of most elements relative to . The differences can be explained if the slab temperature is higher for the Mariana and the source from which the fluid is derived is more enriched. The ELSC1 damp component is best explained by mixing between the wet component and an E-MORB-like component. We propose that mixing between water-rich fluids and low-degree silicate melts occurs at depth in the subduction zone to generate the chemical diversity of the ELSC1 subduction components. These modified sources then rise independently to the surface and melt, and these melts mix with melts of the background mantle from the ridge melting regime to generate the linear data arrays characteristic of back-arc basalts. The major and trace element framework for ELSC1, combined with different slab temperatures and compositions for difference convergent margins, may be able to be applied to other back-arc basins around the globe.Earth and Planetary Science
Recommended from our members
Mantle Source Variations beneath the Eastern Lau Spreading Center and the Nature of Subduction Components in the Lau Basin-Tonga Arc System
New high-density sampling of the Eastern Lau Spreading Center provides constraints on the processes that affect the mantle wedge beneath a back-arc environment, including the effect of the subduction input on basalt petrogenesis and the change in subduction input with distance from the Tonga arc. We obtained trace element and Pb-Sr-Nd isotopic compositions of 64 samples distributed between 20.2 degree S and 22.3 degree S with an average spacing of ~3.6 km. The trace element and isotope variations do not vary simply with distance from the arc and reflect variations in the mantle wedge composition and the presence of multiple components in the subduction input. The mantle wedge composition varies form north to south, owing to the southward migration of Indian-like mantle, progressively replacing the initially Pacific-like mantle wedge. The mantle wedge compositions also require an enriched mid-ocean ridge basalt-like trace element enrichment that has little effect on isotope ratios, suggesting recent low-degree melt enrichment events. The composition of the subduction input added to the mantle wedge is geographically variable and mirrors the changes observed in the Tonga arc island lavas. The combination of the back-arc and arc data allows identification of several components contributing to the subduction input. These are a fluid derived from the altered oceanic crust with a possible sedimentary contribution, a pelagic sediment partial melt, and, in the southern Lau basin, a volcaniclastic sediment partial melt. While on a regional scale, there is a rough decrease in subduction influence with the distance from the arc, on smaller scales, the distribution of the subduction input reflects different mechanisms of the addition of the subduction input to a variable mantle wedge.Earth and Planetary Science
The mean composition of ocean ridge basalts
The mean composition of mid-ocean ridge basalts (MORB) is determined using a global data set of major ele- ments, trace elements, and isotopes compiled from new and previously published data. A global catalog of 771 ridge segments, including their mean depth, length, and spreading rate enables calculation of average compositions for each segment. Segment averages allow weighting by segment length and spreading rate and reduce the bias introduced by uneven sampling. A bootstrapping statistical technique provides rigorous error estimates. Based on the characteristics of the data, we suggest a revised nomenclature for MORB. âALL MORBâ is the total composition of the crust apart from back-arc basins, N-MORB the most likely basalt composition encountered along the ridge >500 km from hot spots, and D-MORB the depleted end-member. ALL MORB and N-MORB are substantially more enriched than early estimates of normal ridge basalts. The mean composition of back-arc spreading centers requires higher extents of melting and greater concentrations of fluid-mobile elements, reflecting the influence of water on back-arc petro- genesis. The average data permit a re-evaluation of several problems of global geochemistry. The K/U ratio reported here (12,340 ` 840) is in accord with previous estimates, much lower than the estimate of Arevalo et al. (2009). The low Sm/Nd and 143Nd/144Nd ratio of ALL MORB and N-MORB provide constraints on the hypothesis that Earth has a non-chondritic primitive mantle. Either Earth is chondritic in Sm/Nd and the hypothesis is incorrect or MORB preferentially sample an enriched reservoir, requiring a large depleted reservoir in the deep mantle.Earth and Planetary Science
Recommended from our members
Enriched Basalts at Segment Centers: The Lucky Strike (37°17â˛N) and Menez Gwen (37°50â˛N) Segments of the MidâAtlantic Ridge
Basalts from the Mid-Atlantic Ridge change progressively in composition with increasing distance from the Azores platform. Study of the Lucky Strike and Menez Gwen segments reveals much complexity in the gradient. Both segments contain only basalts enriched relative to normal mid-oceanic ridge basalt, but in two distinct groups. Moderately enriched basalts occur throughout the segments, with proximal Menez Gwen enriched relative to Lucky Strike. Highly enriched basalts occur at segment centers. Incompatible element ratios of the highly enriched basalts exceed those of the Azores platform, while isotopic compositions are less enriched. These observations can be explained by a low-degree melt of garnet-bearing Azores mantle added to mantle depleted by previous melt extraction. Melting this âmetasomatizedâ mantle produces lavas that match the enriched samples. The Azores gradient cannot be explained by simple two-component mixing; rather, it reflects recent melt extraction and addition processes related to southward flow of the Azores plume. The Azores gradient also permits tests of segmentation models. Central supply models predict step functions in chemical compositions between segments. Within-segment gradients require vertical supply. Central supply is supported by robust central volcanoes, thicker crust at segment centers, and a step function in isotopes between the segments. The lava diversity at segment centers, however, requires batches of distinct magma that are preserved through melting and melt delivery. Within-segment gradients in moderately incompatible element ratios support a component of multiple supply. The data suggest partial homogenization of magma within a segment and preferential melt focusing to segment centers with some vertical transport.Earth and Planetary Science
- âŚ