5,212 research outputs found
Analysing powers for the reaction and for np elastic scattering from 270 to 570 MeV
The analysing power of the reaction for neutron energies between threshold and 570 MeV has been determined
using a transversely polarised neutron beam at PSI. The reaction has been
studied in a kinematically complete measurement using a time-of-flight
spectrometer with large acceptance. Analysing powers have been determined as a
function of the c.m. pion angle in different regions of the proton-proton
invariant mass. They are compared to other data from the reactions and . The np elastic scattering analysing power was determined as a
by-product of the measurements.Comment: 12 pages, 6 figures, subitted to EPJ-
The reaction from threshold up to 570 MeV
The reaction has been studied in a
kinematically complete measurement with a large acceptance time-of-flight
spectrometer for incident neutron energies between threshold and 570 MeV. The
proton-proton invariant mass distributions show a strong enhancement due to the
pp() final state interaction. A large anisotropy was found in the
pion angular distributions in contrast to the reaction . At small energies, a large forward/backward asymmetry has been
observed. From the measured integrated cross section , the isoscalar cross section has been extracted.
Its energy dependence indicates that mainly partial waves with Sp final states
contribute. Note: Due to a coding error, the differential cross sections as shown in Fig. 9 are too small by a factor of two, and
inn Table 3 the differential cross sections
are too large by a factor of . The integrated cross sections and all
conclusions remain unchanged. A corresponding erratum has been submitted and
accepted by European Physics Journal.Comment: 18 pages, 16 figure
Master equation approach to friction at the mesoscale
At the mesoscale friction occurs through the breaking and formation of local
contacts. This is often described by the earthquake-like model which requires
numerical studies. We show that this phenomenon can also be described by a
master equation, which can be solved analytically in some cases and provides an
efficient numerical solution for more general cases. We examine the effect of
temperature and aging of the contacts and discuss the statistical properties of
the contacts for different situations of friction and their implications,
particularly regarding the existence of stick-slip.Comment: To be published in Physical Review
Model-independent extraction of matrix elements from top-quark measurements at hadron colliders
Current methods to extract the quark-mixing matrix element from
single-top production measurements assume that : top quarks decay into quarks with 100% branching fraction,
s-channel single-top production is always accompanied by a quark and
initial-state contributions from and quarks in the -channel
production of single top quarks are neglected. Triggered by a recent
measurement of the ratio
performed by the D0 collaboration, we consider a extraction method
that takes into account non zero d- and s-quark contributions both in
production and decay. We propose a strategy that allows to extract consistently
and in a model-independent way the quark mixing matrix elements ,
, and from the measurement of and from single-top
measured event yields. As an illustration, we apply our method to the Tevatron
data using a CDF analysis of the measured single-top event yield with two jets
in the final state one of which is identified as a -quark jet. We constrain
the matrix elements within a four-generation scenario by combining
the results with those obtained from direct measurements in flavor physics and
determine the preferred range for the top-quark decay width within different
scenarios.Comment: 36 pages, 17 figure
Physics at BES-III
This physics book provides detailed discussions on important topics in
-charm physics that will be explored during the next few years at \bes3 .
Both theoretical and experimental issues are covered, including extensive
reviews of recent theoretical developments and experimental techniques. Among
the subjects covered are: innovations in Partial Wave Analysis (PWA),
theoretical and experimental techniques for Dalitz-plot analyses, analysis
tools to extract absolute branching fractions and measurements of decay
constants, form factors, and CP-violation and \DzDzb-oscillation parameters.
Programs of QCD studies and near-threshold tau-lepton physics measurements are
also discussed.Comment: Edited by Kuang-Ta Chao and Yi-Fang Wan
Enabling Technologies for Silicon Microstrip Tracking Detectors at the HL-LHC
While the tracking detectors of the ATLAS and CMS experiments have shown
excellent performance in Run 1 of LHC data taking, and are expected to continue
to do so during LHC operation at design luminosity, both experiments will have
to exchange their tracking systems when the LHC is upgraded to the
high-luminosity LHC (HL-LHC) around the year 2024. The new tracking systems
need to operate in an environment in which both the hit densities and the
radiation damage will be about an order of magnitude higher than today. In
addition, the new trackers need to contribute to the first level trigger in
order to maintain a high data-taking efficiency for the interesting processes.
Novel detector technologies have to be developed to meet these very challenging
goals. The German groups active in the upgrades of the ATLAS and CMS tracking
systems have formed a collaborative "Project on Enabling Technologies for
Silicon Microstrip Tracking Detectors at the HL-LHC" (PETTL), which was
supported by the Helmholtz Alliance "Physics at the Terascale" during the years
2013 and 2014. The aim of the project was to share experience and to work
together on key areas of mutual interest during the R&D phase of these
upgrades. The project concentrated on five areas, namely exchange of
experience, radiation hardness of silicon sensors, low mass system design,
automated precision assembly procedures, and irradiations. This report
summarizes the main achievements
Prototyping of petalets for the Phase-II Upgrade of the silicon strip tracking detector of the ATLAS Experiment
In the high luminosity era of the Large Hadron Collider, the HL-LHC, the
instantaneous luminosity is expected to reach unprecedented values, resulting
in about 200 proton-proton interactions in a typical bunch crossing. To cope
with the resultant increase in occupancy, bandwidth and radiation damage, the
ATLAS Inner Detector will be replaced by an all-silicon system, the Inner
Tracker (ITk). The ITk consists of a silicon pixel and a strip detector and
exploits the concept of modularity. Prototyping and testing of various strip
detector components has been carried out. This paper presents the developments
and results obtained with reduced-size structures equivalent to those foreseen
to be used in the forward region of the silicon strip detector. Referred to as
petalets, these structures are built around a composite sandwich with embedded
cooling pipes and electrical tapes for routing the signals and power. Detector
modules built using electronic flex boards and silicon strip sensors are glued
on both the front and back side surfaces of the carbon structure. Details are
given on the assembly, testing and evaluation of several petalets. Measurement
results of both mechanical and electrical quantities are shown. Moreover, an
outlook is given for improved prototyping plans for large structures.Comment: 22 pages for submission for Journal of Instrumentatio
Single-top t-channel hadroproduction in the four-flavour scheme with POWHEG and aMC@NLO
We present results for the QCD next-to-leading order (NLO) calculation of
single-top t-channel production in the 4-flavour scheme, interfaced to Parton
Shower (PS) Monte Carlo programs according to the POWHEG and MC@NLO methods.
Comparisons between the two methods, as well as with the corresponding process
in the 5-flavour scheme are presented. For the first time results for typical
kinematic distributions of the spectator-b jet are presented in an NLO+PS
approach.Comment: 16+1 pages, 8 figures, matches version accepted for publication in
JHE
Single \pi^- production in np collisions for excess energies up to 90 MeV
The quasifree reaction np\to pp\pim was studied in a kinematically complete
experiment by bombarding a liquid hydrogen target with a deuteron beam of
momentum 1.85 GeV/c and analyzing the data along the lines of the spectator
model. In addition to the three charged ejectiles the spectator proton was also
detected in the large-acceptance time-of-flight spectrometer COSY-TOF. It was
identified by its momentum and flight direction thus yielding access to the
Fermi motion of the bound neutron and to the effective neutron 4-momentum
vector which differed from event to event. A range of almost 90
MeV excess energy above threshold was covered. Energy dependent angular
distributions, invariant mass spectra as well as fully covered Dalitz plots
were deduced. Sizeable FSI effects were found as were contributions of
and partial waves. The behavior of the elementary cross section
close to threshold is discussed in view of new cross section
data. In comparison with existing literature data the results provide a
sensitive test of the spectator model.Comment: 21 pages, 9 figures, 4 tables, submitted to EPJ
- âŠ