2 research outputs found
Design and energy performance analysis of a hotel building in a hot and dry climate: a case study
In times of unprecedented climate change and energy scarcity, the design and delivery of energy-efficient and sustainable buildings are of utmost importance. This study aimed to design a hotel building for hot and dry climate conditions and perform its energy performance analysis using energy simulation tools. The model of the hotel building was constructed by a graphical tool OpenStudio and EnergyPlus following the ASHRAE Standard 90.1. To reduce the energy demand of the hotel, parametric analysis was conducted and building envelope parameters such as the thickness of insulation layer in the exterior wall and the roof, thermal conductivity of insulation layer, rate of infiltration, U-factor of windows, and thermal resistance of air gap in the interior walls (R-value), window-to-wall ratio, and orientation of the building were tested and the impact on the energy use of the building was analyzed. It was found that most of the design assumptions based on the ASHRAE standard were already optimal for the considered locality, however, were still optimized further to reach the highest efficiency level. Apart from this, three sustainable technologies—thermochromic windows, phase change materials, and solar panels—were incorporated into the building and their energy consumption reduction potential was estimated by energy simulations. Cumulatively, these sustainable technologies were able to reduce the total energy use from 2417 GJ to 1593 GJ (i.e., by 824 GJ or 34%). Calculation of payback period and return on investments showed that thermochromic windows and solar panels have relatively short payback periods and high return on investments, whereas PCM was found to be economically nonviable. The findings of this study are deemed to be useful for designing a sustainable and energy-efficient hotel building in a sub-tropical climate. However, the overall design and energy performance analysis algorithm could be used for various buildings with varying climate conditions
Recommended from our members
Design and modeling of an on-site greywater treatment system for a hotel building
As the United States is making a significant move towards rejoining the Paris Agreement on climate change, there is a high demand for sustainable solutions across various industries, including construction and hospitality sectors. The aim of this project was to design and model an on-site greywater treatment system for a hotel building for the effective reuse of sewage water. The study considered Los Angeles, California, as a case study location and referred to respective climate conditions and construction standards. This study considered various options of greywater treatment plants such as Membrane Bioreactor (MBR), Sequencing Batch Reactor (SBR), and Reverse Osmosis with Upflow Anaerobic Sludge Blanket (RO with UASB) which were carefully reviewed and modeled through the GPS-X software. The design and modeling results were verified by hand calculations and were followed by the estimation of capital and operational expenses required for the implementation of the plants. Having relatively low capital and operational expenditure requirements as well as superior technical performance, the MBR plant proved to be the most effective solution for the considered location and standards and was recommended for use in hotel buildings