7 research outputs found
Development and analysis of the Soil Water Infiltration Global database
In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements ( ∼ 76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76% of the experimental sites with agricultural land use as the dominant type ( ∼ 40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it
Development and analysis of the Soil Water Infiltration Global database
In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements ( ∼ 76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76% of the experimental sites with agricultural land use as the dominant type ( ∼ 40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it
Assessment of some homogeneous methods for the regional analysis of suspended sediment yield in the south and southeast of the Caspian Sea
A regional suspended load yield estimation model for ungauged watersheds
Developing regional models using physiographic, climatic, and hydrologic variables is an approach to estimating suspended load yield (SLY) in ungauged watersheds. However, using all the variables might reduce the applicability of these models. Therefore, data reduction techniques (DRTs), e.g., principal component analysis (PCA), Gamma test (GT), and stepwise regression (SR), have been used to select the most effective variables. The artificial neural network (ANN) and multiple linear regression (MLR) are also common tools for SLY modeling. We conducted this study (1) to obtain the most effective variables influencing SLY through DRTs including PCA, GT, and SR, and then, to use them as input data for ANN and MLR; and (2) to provide the best SLY models. Accordingly, we used 14 physiographic, climatic, and hydrologic parameters from 42 watersheds in the Hyrcanian forest region (in northern Iran). The most effective variables as determined through DRTs as well as the original data sets were used as the input data for ANN and MLR in order to provide an SLY model. The results indicated that the SLY models provided by ANN performed much better than the MLR models, and the GT-ANN model was the best. The determination of coefficient, relative error, root mean square error, and bias were 99.9%, 26%, 323 t/year, and 6 t/year in the calibration period, and 70%, 43%, 456 t/year, and 407 t/year in the validation period, respectively. Overall, selecting the main factors that influence SLY and using artificial intelligence tools can be useful for water resources managers to quickly determine the behavior of SLY in ungauged watersheds. Keywords: Data reduction techniques, Forest watershed, Sediment yield, Regional models, Watershed sediment modelin
Effects of type, level and time of sand and gravel mining on particle size distributions of suspended sediment
Monitoring the sediment transport behavior induced by different interventions, particularly sand mining from rivers, is needed to adaptively manage the watersheds. The particle size distribution of the suspended sediment in up and downstream of rivers is one of the main indicators to know about fate of sediments, which may be varied in different conditions. We investigated the effect of some types of sand and gravel (i.e., manual and low, semi-heavy, and heavy machinery) mining on particle size distribution of suspended sediment in the Vaz-e-Owlya, Vaz-e-Sofla and Alesh-Roud riverine mines located in Mazandaran Province, northern Iran. The study was conducted on a monthly basis from February, 2012 to January, 2013. Laser granulometry was used to analyze the particle size distribution of suspended sediment samples taken from up and downstream sections of the study mines. The results revealed that the level and intensity of mining activity affected particle size distribution of suspended sediments. Further statistical assessments in up and downstream sections of the mines proved that sorting, D50, mean, D90, kurtosis, skewness and D10 of the suspended sediment were not significantly influenced by mining activities at levels of 0.09, 0.11, 0.12, 0.15 to 0.69, 0.15–0.69, 0.77, 0.87, 0.97, respectively. While it was not statistically significant, we found that the type of mine and the level of the exploitation changed the particle size distribution of the suspended sediment. Keywords: Mine exploitation, Particle size distribution, Sediment granulometry, Sediment temporal variation
Development and analysis of the Soil Water Infiltration Global database
In this paper, we present and analyze a global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database, for the first time. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and USA. In addition to its global spatial coverage, the collected infiltration curves cover a time span of research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use were gathered along with the infiltration data, which makes the database valuable for the development of pedo-transfer functions for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements (~76 %) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on the land use is available for 76 % of experimental sites with agricultural land use as the dominant type (~40 %). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for use by public domain only and can be copied freely by referencing it. Supplementary data are available at doi:10.1594/PANGAEA.885492. Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend/update the SWIG by uploading new data to it
Development and analysis of the Soil Water Infiltration Global database
© Author(s) 2018. In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements (∼76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76ĝ€% of the experimental sites with agricultural land use as the dominant type (∼40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in ∗.xlsx and ∗.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it.status: publishe