In Situ Nanomechanical Measurements of Interfacial Strength in Membrane-Embedded Chemically Functionalized Si Microwires for Flexible Solar Cells

Arrays of vertically aligned Si microwires embedded in polydimethylsiloxane (PDMS) have emerged as a promising candidate for use in solar energy conversion devices. Such structures are lightweight and concurrently demonstrate competitive efficiency and mechanical flexibility. To ensure reliable functioning under bending and flexing, strong interfacial adhesion between the nanowire and the matrix is needed. In situ uniaxial tensile tests of individual, chemically functionalized, Si microwires embedded in a compliant PDMS matrix reveal that chemical functionality on Si microwire surfaces is directly correlated with interfacial adhesion strength. Chemical functionalization can therefore serve as an effective methodology for accessing a wide range of interfacial adhesion between the rigid constituents and the soft polymer matrix; the adhesion can be quantified by measuring the mechanical strength of such systems

In Situ Nanomechanical Measurements of Interfacial Strength in Membrane-Embedded Chemically Functionalized Si Microwires for Flexible Solar Cells

Arrays of vertically aligned Si microwires embedded in polydimethylsiloxane (PDMS) have emerged as a promising candidate for use in solar energy conversion devices. Such structures are lightweight and concurrently demonstrate competitive efficiency and mechanical flexibility. To ensure reliable functioning under bending and flexing, strong interfacial adhesion between the nanowire and the matrix is needed. In situ uniaxial tensile tests of individual, chemically functionalized, Si microwires embedded in a compliant PDMS matrix reveal that chemical functionality on Si microwire surfaces is directly correlated with interfacial adhesion strength. Chemical functionalization can therefore serve as an effective methodology for accessing a wide range of interfacial adhesion between the rigid constituents and the soft polymer matrix; the adhesion can be quantified by measuring the mechanical strength of such systems

In Situ Nanomechanical Measurements of Interfacial Strength in Membrane-Embedded Chemically Functionalized Si Microwires for Flexible Solar Cells

Arrays of vertically aligned Si microwires embedded in polydimethylsiloxane (PDMS) have emerged as a promising candidate for use in solar energy conversion devices. Such structures are lightweight and concurrently demonstrate competitive efficiency and mechanical flexibility. To ensure reliable functioning under bending and flexing, strong interfacial adhesion between the nanowire and the matrix is needed. In situ uniaxial tensile tests of individual, chemically functionalized, Si microwires embedded in a compliant PDMS matrix reveal that chemical functionality on Si microwire surfaces is directly correlated with interfacial adhesion strength. Chemical functionalization can therefore serve as an effective methodology for accessing a wide range of interfacial adhesion between the rigid constituents and the soft polymer matrix; the adhesion can be quantified by measuring the mechanical strength of such systems

Enabling Simultaneous Extreme Ultra Low‑<i>k</i> in Stiff, Resilient, and Thermally Stable Nano-Architected Materials

Low dielectric constant (low-<i>k</i>) materials have gained increasing popularity because of their critical role in developing faster, smaller, and higher performance devices. Their practical use has been limited by the strong coupling among mechanical, thermal, and electrical properties of materials and their dielectric constant; a low-<i>k</i> is usually attained by materials that are very porous, which results in high compliance, that is, silica aerogels; high dielectric loss, that is, porous polycrystalline alumina; and poor thermal stability, that is, Sr-based metal–organic frameworks. We report the fabrication of 3D nanoarchitected hollow-beam alumina dielectrics which <i>k</i> is 1.06–1.10 at 1 MHz that is stable over the voltage range of −20 to 20 V and a frequency range of 100 kHz to 10 MHz. This dielectric material can be used in capacitors and is mechanically resilient, with a Young’s modulus of 30 MPa, a yield strength of 1.07 MPa, a nearly full shape recoverability to its original size after >50% compressions, and outstanding thermal stability with a thermal coefficient of dielectric constant (TCK) of 2.43 × 10^–5 K^–1 up to 800 °C. These results suggest that nanoarchitected materials may serve as viable candidates for ultra low-<i>k</i> materials that are simultaneously mechanically resilient and thermally and electrically stable for microelectronics and devices

Exceptional Resilience of Small-Scale Au₃₀Cu₂₅Zn₄₅ under Cyclic Stress-Induced Phase Transformation

Shape memory alloys that produce and recover from large deformation driven by martensitic transformation are widely exploited in biomedical devices and microactuators. Generally their actuation work degrades significantly within first a few cycles and is reduced at smaller dimensions. Further, alloys exhibiting unprecedented reversibility have relatively small superelastic strain, 0.7%. These raise the questions of whether high reversibility is necessarily accompanied by small work and strain and whether high work and strain is necessarily diminished at small scale. Here we conclusively demonstrate that these are not true by showing that Au₃₀Cu₂₅Zn₄₅ pillars exhibit 12 MJ m^–3 work and 3.5% superelastic strain even after 100 000 phase transformation cycles. Our findings confirm that the lattice compatibility dominates the mechanical behavior of phase-changing materials at nano to micron scales and points a way for smart microactuators design having the mutual benefits of high actuation work and long lifetime

Three-Dimensional Au Microlattices as Positive Electrodes for Li–O₂ Batteries

We demonstrate the feasibility of using a 3-dimensional gold microlattice with a periodic porous structure and independently tunable surface composition as a Li–O₂ battery cathode. The structure provides a platform for studying electrochemical reactions in architected Li–O₂ electrodes with large (300 μm) pore sizes. The lack of carbon and chemical binders in these Au microlattices enabled the investigation of chemical and morphological processes that occur on the surfaces of the microlattice during cycling. Li–O₂ cells with Au microlattice cathodes were discharged in 0.5 M lithium-bis(trifluoromethane)sulfonamide (LiTFSI) in a 1,2-dimethoxyethane (DME) electrolyte, with lithium metal foil as the anode. SEM analysis of microlattice cathodes after first discharge revealed the presence of toroidal-shaped 500–700 nm particles covering the surface of the electrode, which disappeared upon subsequent charging. Raman and FTIR spectroscopy analysis determined these particulates to be Li₂O₂. The morphology of discharge products evolved with cycling into micrometer-sized clusters of arranged “platelets”, with a higher amount of side reaction products such as Li₂CO₃ and LiOH. This work shows that properly designed 3-dimensional architected materials may provide a useful foundation for investigating fundamental surface electrochemistry while simultaneously enabling mechanical robustness and enhancing the surface area over a factor of 30 compared with a thin film with the same foot print

Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices with nanoscale components. No consensus exists on the effect of flaws on fracture at the nanoscale, but proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with scarce experimental support. We explore fracture in nanomaterials using nanocrystalline Pt nanocylinders with prefabricated surface notches created using a “paused” electroplating method. In situ scanning electron microscopy (SEM) tension tests demonstrate that the majority of these samples failed at the notches, but that tensile failure strength is independent of whether failure occurred at or away from the flaw. Molecular dynamics simulations verify these findings and show that local plasticity is able to reduce stress concentration ahead of the notch to levels comparable with the strengths of microstructural features (e.g., grain boundaries). Thus, failure occurs at the stress concentration with the highest local stress whether this is at the notch or a microstructural feature

Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices with nanoscale components. No consensus exists on the effect of flaws on fracture at the nanoscale, but proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with scarce experimental support. We explore fracture in nanomaterials using nanocrystalline Pt nanocylinders with prefabricated surface notches created using a “paused” electroplating method. In situ scanning electron microscopy (SEM) tension tests demonstrate that the majority of these samples failed at the notches, but that tensile failure strength is independent of whether failure occurred at or away from the flaw. Molecular dynamics simulations verify these findings and show that local plasticity is able to reduce stress concentration ahead of the notch to levels comparable with the strengths of microstructural features (e.g., grain boundaries). Thus, failure occurs at the stress concentration with the highest local stress whether this is at the notch or a microstructural feature

Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices with nanoscale components. No consensus exists on the effect of flaws on fracture at the nanoscale, but proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with scarce experimental support. We explore fracture in nanomaterials using nanocrystalline Pt nanocylinders with prefabricated surface notches created using a “paused” electroplating method. In situ scanning electron microscopy (SEM) tension tests demonstrate that the majority of these samples failed at the notches, but that tensile failure strength is independent of whether failure occurred at or away from the flaw. Molecular dynamics simulations verify these findings and show that local plasticity is able to reduce stress concentration ahead of the notch to levels comparable with the strengths of microstructural features (e.g., grain boundaries). Thus, failure occurs at the stress concentration with the highest local stress whether this is at the notch or a microstructural feature

Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices with nanoscale components. No consensus exists on the effect of flaws on fracture at the nanoscale, but proposed theories include nanoscale flaw tolerance and maintaining macroscopic fracture relationships at the nanoscale with scarce experimental support. We explore fracture in nanomaterials using nanocrystalline Pt nanocylinders with prefabricated surface notches created using a “paused” electroplating method. In situ scanning electron microscopy (SEM) tension tests demonstrate that the majority of these samples failed at the notches, but that tensile failure strength is independent of whether failure occurred at or away from the flaw. Molecular dynamics simulations verify these findings and show that local plasticity is able to reduce stress concentration ahead of the notch to levels comparable with the strengths of microstructural features (e.g., grain boundaries). Thus, failure occurs at the stress concentration with the highest local stress whether this is at the notch or a microstructural feature