41 research outputs found
Subduction age and stress state control on seismicity in the NW Pacific subducting plate
Intermediate depth (70-300 km) and deep (> 300 km) earthquakes have always been puzzling Earth scientists: their occurrence is a paradox, since the ductile behavior of rocks and the high confining pressure with increasing depths would theoretically preclude brittle failure and frictional sliding. The mechanisms proposed to explain deep earthquakes, mainly depending on the subducting plate age and stress state, are generally expressed by single parameters, unsuitable to comprehensively account for differences among distinct subduction zones or within the same slab. We analyze the Kurile and Izu-Bonin intraslab seismicity and detail the Gutenberg-Richter b-value along the subducted planes, interpreting its variation in terms of stress state, analogously to what usually done for shallow earthquakes. We demonstrate that, despite the slabs different properties (e.g., lithospheric age, stress state, dehydration rate), in both cases deep earthquakes are restricted to depths characterized by equal age from subduction initiation and are driven by stress regimes affected by the persistence of the metastable olivine wedge
The Transition Zone Beneath West ArgentinaâCentral Chile Using P âtoâ S Converted Waves
We investigate the mantle transition zone beneath the ChileâArgentina flat subduction region by means of PâtoâS conversions at mantle discontinuities from teleseismic events recorded at 103 seismic stations. From the analysis of receiver functions, we obtain clear converted phases from the 410 and 660 discontinuities, and we identify a robust precursory signal to P660s, of negative amplitude, that we name P590s. We observe little frequency dependence in the amplitude of the P410s converted phase, while the P660s is less visible toward higher frequencies. The 410 is on average deeper than 410âkm by 10â±â1âkm in the higherâfrequency bands, and it is relatively sharp, being consistent with a 10% velocity jump over less than 20âkm. The observed 660 depth varies with frequency; it is deeper by up to 18â±â2âkm for lower frequencies and close to reference at higher frequencies, being consistent with a 13% broad velocity gradient over 30â40âkm, probably caused by a composite of multiple phase transitions. The transition zone thickness is controlled by the frequencyâdependent depth variability of the 660. Our findings of relative depth, width, and velocity jump of the detected discontinuities, combined with tomographic images of the mantle transition zone, cannot be explained by thermal variations alone. Compositional constraints from mineral physics show that a near pyrolitic mantle is consistent with the ratio of the estimated velocity jumps. However, the negative P590s phase in this region could be signal from the velocity reduction due to basalt accumulation at the base of the transition zone
Empirical Analysis of Global-Scale Natural Data and Analogue Seismotectonic Modelling Data to Unravel the Seismic Behaviour of the Subduction Megathrust
Subduction megathrusts host the Earthâs greatest earthquakes as the 1960 Valdivia (Mw9.5, Chile), the largest earthquake instrumentally recorded, and the recent 2004 Sumatra-Andaman (Mw9.2, Indonesia), 2010 Maule (Mw8.8, Chile), and 2011 Tohoku-Oki (Mw9.1,Japan) earthquakes triggering devastating tsunamis and representing a major hazard tosociety. Unravelling the spatio-temporal pattern of these events is thus a key for seismichazard assessment of subduction zones. This paper reviews the current state ofknowledge of two research areasâempirical analysis of global-scale natural data andexperimental data from an analogue seismotectonic modellingâdevoted to study cause-effect relationships between subduction zone parameters and the megathrustseismogenic behavior. The combination of the two approaches overcomes theobservational bias and inherent sampling limitations of geological processes(i.e., shortness of instrumental and historical data, decreasing completeness andresolution with time into the past) and allows drawing appropriately from multipledisciplines with the aim of highlighting the geodynamic conditions that may favor theoccurrence of giant megathrust earthquakes
AlpArray-Italy: Site description and noise characterization
Within the framework of the European collaborative research initiative AlpArray (http://www.alparray.ethz. ch), the Istituto Nazionale di Geofisica e Vulcanolgia (INGV) deployed overall 20 broad-band seismic stations in Northern Italy and on two islands in the Tyrrhenian Sea (Capraia and Montecristo) during Fall-Winter 2015.
The temporary deployment (16 stations) will run for two to three years and 4 INGV National Seismic Network accelerometric sites are now equipped with additional per- manent broad-band sensors. The 16 temporary stations are equipped with REF TEK 130 digitizers and Nanometrics Trillium Compact 120 s sensors, a couple have Nanometrics Trillium 120P sensors and one a Streckeisen STS2.
For each site we describe the settings and discuss the noise levels, the site effects and the preliminary sensitivity analysis.Published39-528T. Sismologia in tempo realeJCR Journa
Contrasting styles of (U)HP rock exhumation along the Cenozoic Adria-Europe plate boundary (Western Alps, Calabria, Corsica)
Since the first discovery of ultrahigh pressure (UHP) rocks 30 years ago in the Western Alps, the mechanisms for exhumation of (U)HP terranes worldwide are still debated. In the western Mediterranean, the presently accepted model of synconvergent exhumation (e.g., the channel-flow model) is in conflict with parts of the geologic record. We synthesize regional geologic data and present alternative exhumation mechanisms that consider the role of divergence within subduction zones. These mechanisms, i.e., (i) the motion of the upper plate away from the trench and (ii) the rollback of the lower plate, are discussed in detail with particular reference to the Cenozoic Adria-Europe plate boundary, and along three different transects (Western Alps, Calabria-Sardinia, and Corsica-Northern Apennines). In the Western Alps, (U)HP rocks were exhumed from the greatest depth at the rear of the accretionary wedge during motion of the upper plate away from the trench. Exhumation was extremely fast, and associated with very low geothermal gradients. In Calabria, HP rocks were exhumed from shallower depths and at lower rates during rollback of the Adriatic plate, with repeated exhumation pulses progressively younging toward the foreland. Both mechanisms were active to create boundary divergence along the Corsica-Northern Apennines transect, where European southeastward subduction was progressively replaced along strike by Adriatic northwestward subduction. The tectonic scenario depicted for the Western Alps trench during Eocene exhumation of (U)HP rocks correlates well with present-day eastern Papua New Guinea, which is presented as a modern analog of the Paleogene Adria-Europe plate boundary
Planning and managing a seismic emergency: The INGV drill of November 26th, 2015 carried out in the framework of the activity line T5 "Seismic surveillance and post-earthquake operational procedures" | Pianificazione e gestione di un'emergenza sismica: Esercitazione INGV del 26 novembre 2015 effettuata nell'ambito della Linea di AttivitĂ T5 "Sorveglianza sismica e operativitĂ post terremoto"
Nella Struttura Terremoti dellâINGV la Linea di AttivitĂ T5 âSorveglianza sismica ed operativitĂ postterremotoâ
si occupa delle attivitĂ di sviluppo di strumenti e procedure per la valutazione in tempo reale
degli effetti di terremoti e tsunami e della gestione delle emergenze sismiche. Uno dei suoi obiettivi del
2015 era la formalizzazione dei protocolli di intervento di Gruppi dâEmergenza, avvenuta per Emergeo, Emersito,
IES, QUEST e Sismiko con Decreto del Presidente nel luglio 2015. Altro obiettivo era lâelaborazione di un Protocollo
di Ente per la gestione delle emergenze sismiche. La bozza preparata nel 2015 prevede lâimportante novitĂ dellâUnitĂ
di Crisi, mai formalizzata in precedenza. Attraverso questo Protocollo di Ente si auspica di migliorare la risposta
logistico-operativa dellâINGV durante lâemergenza, di avere una piĂč rapida conoscenza del fenomeno in corso e di
realizzare unâefficace comunicazione verso Protezione Civile, media e pubblico. Per verificare il tutto Ăš stata
organizzata unâesercitazione in cui Ăš stato simulato un terremoto di magnitudo 6.4 nel basso Lazio. Si sono cosĂŹ
sperimentate lâefficacia del flusso azioni/informazioni durante unâemergenza, il funzionamento dellâUnitĂ di Crisi,
la funzionalitĂ dei protocolli dei Gruppi dâEmergenza, lâefficienza delle attivitĂ in sede per gli aspetti tecnico-logistici,
il flusso di comunicazione interno e le comunicazioni istituzionali esterne (queste ultime simulate). In questo articolo
sono descritte le fasi di organizzazione ed attuazione dellâesercitazione. Inoltre, durante il suo svolgimento, la
valutazione dellâefficacia dellâorganizzazione e delle attivitĂ svolte dai gruppi coinvolti Ăš stata affidata ad alcuni
osservatori e qui Ăš allegata lâelaborazione dei commenti riportati. Abbiamo fatto infine una sintesi dei risultati positivi
e delle criticitĂ emerse dallâesercitazione, attivitĂ cosĂŹ importante a nostro avviso da considerarne indispensabile la
ripetizione con cadenza quanto meno annuale.Published1SR. TERREMOTI - Servizi e ricerca per la SocietĂ N/A or not JCRope
The AlpArray Seismic Network: A Large-Scale European Experiment to Image the Alpine Orogen
International audienceThe AlpArray programme is a multinational, European consortium to advance our understanding of orogenesis and its relationship to mantle dynamics, plate reorganizations , surface processes and seismic hazard in the Alps-Apennines-Carpathians-Dinarides orogenic system. The AlpArray Seismic Network has been deployed with contributions from 36 institutions from 11 countries to map physical properties of the lithosphere and astheno-sphere in 3D and thus to obtain new, high-resolution geophysical images of structures from the surface down to the base of the mantle transition zone. With over 600 broadband stations Electronic supplementary material The online version of this article (https ://doi. 1 3 operated for 2 years, this seismic experiment is one of the largest simultaneously operated seismological networks in the academic domain, employing hexagonal coverage with station spacing at less than 52 km. This dense and regularly spaced experiment is made possible by the coordinated coeval deployment of temporary stations from numerous national pools, including ocean-bottom seismometers, which were funded by different national agencies. They combine with permanent networks, which also required the cooperation of many different operators. Together these stations ultimately fill coverage gaps. Following a short overview of previous large-scale seismological experiments in the Alpine region, we here present the goals, construction, deployment, characteristics and data management of the AlpArray Seismic Network, which will provide data that is expected to be unprecedented in quality to image the complex Alpine mountains at depth
Ambient-noise tomography of the wider Vienna Basin region
We present a new 3-D shear-velocity model for the top 30âkm of the crust in the wider Vienna Basin region based on surface waves extracted from ambient-noise cross-correlations. We use continuous seismic records of 63 broad-band stations of the AlpArray project to retrieve interstation Greenâs functions from ambient-noise cross-correlations in the period range from 5 to 25 s. From these Greenâs functions, we measure Rayleigh group traveltimes, utilizing all four components of the cross-correlation tensor, which are associated with Rayleigh waves (ZZ, RR, RZ and ZR), to exploit multiple measurements per station pair. A set of selection criteria is applied to ensure that we use high-quality recordings of fundamental Rayleigh modes. We regionalize the interstation group velocities in a 5âkm Ă 5âkm grid with an average path density of âŒ20 paths per cell. From the resulting group-velocity maps, we extract local 1-D dispersion curves for each cell and invert all cells independently to retrieve the crustal shear-velocity structure of the study area. The resulting model provides a previously unachieved lateral resolution of seismic velocities in the region of âŒ15âkm. As major features, we image the Vienna Basin and Little Hungarian Plain as low-velocity anomalies, and the Bohemian Massif with high velocities. The edges of these features are marked with prominent velocity contrasts correlated with faults, such as the Alpine Front and Vienna Basin transfer fault system. The observed structures correlate well with surface geology, gravitational anomalies and the few known crystalline basement depths from boreholes. For depths larger than those reached by boreholes, the new model allows new insight into the complex structure of the Vienna Basin and surrounding areas, including deep low-velocity zones, which we image with previously unachieved detail. This model may be used in the future to interpret the deeper structures and tectonic evolution of the wider Vienna Basin region, evaluate natural resources, model wave propagation and improve earthquake locations, among others
Arrival angles of teleseismic fundamental mode Rayleigh waves across the AlpArray
The dense AlpArray network allows studying seismic wave propagation with high spatial resolution. Here we introduce an array approach to measure arrival angles of teleseismic Rayleigh waves. The approach combines the advantages of phase correlation as in the two-station method with array beamforming to obtain the phase-velocity vector. 20 earthquakes from the first two years of the AlpArray project are selected, and spatial patterns of arrival-angle deviations across the AlpArray are shown in maps, depending on period and earthquake location. The cause of these intriguing spatial patterns is discussed. A simple wave-propagation modelling example using an isolated anomaly and a Gaussian beam solution suggests that much of the complexity can be explained as a result of wave interference after passing a structural anomaly along the wave paths. This indicates that arrival-angle information constitutes useful additional information on the Earth structure, beyond what is currently used in inversions
Shear-wave velocity structure beneath the Dinarides from the inversion of Rayleigh-wave dispersion
Highlights
âą Rayleigh-wave phase velocity in the wider Dinarides region using the two-station method.
âą Uppermost mantle shear-wave velocity model of the Dinarides-Adriatic Sea region.
âą Velocity model reveals a robust high-velocity anomaly present under the whole Dinarides.
âą High-velocity anomaly reaches depth of 160 km in the northern Dinarides to more than 200 km under southern Dinarides.
âą New structural model incorporating delamination as one of the processes controlling the continental collision in the Dinarides.
The interaction between the Adriatic microplate (Adria) and Eurasia is the main driving factor in the central Mediterranean tectonics. Their interplay has shaped the geodynamics of the whole region and formed several mountain belts including Alps, Dinarides and Apennines. Among these, Dinarides are the least investigated and little is known about the underlying geodynamic processes. There are numerous open questions about the current state of interaction between Adria and Eurasia under the Dinaric domain. One of the most interesting is the nature of lithospheric underthrusting of Adriatic plate, e.g. length of the slab or varying slab disposition along the orogen. Previous investigations have found a low-velocity zone in the uppermost mantle under the northern-central Dinarides which was interpreted as a slab gap. Conversely, several newer studies have indicated the presence of the continuous slab under the Dinarides with no trace of the low velocity zone.
Thus, to investigate the Dinaric mantle structure further, we use regional-to-teleseismic surface-wave records from 98 seismic stations in the wider Dinarides region to create a 3D shear-wave velocity model. More precisely, a two-station method is used to extract Rayleigh-wave phase velocity while tomography and 1D inversion of the phase velocity are employed to map the depth dependent shear-wave velocity. Resulting velocity model reveals a robust high-velocity anomaly present under the whole Dinarides, reaching the depths of 160 km in the north to more than 200 km under southern Dinarides. These results do not agree with most of the previous investigations and show continuous underthrusting of the Adriatic lithosphere under Europe along the whole Dinaric region. The geometry of the down-going slab varies from the deeper slab in the north and south to the shallower underthrusting in the center. On-top of both north and south slabs there is a low-velocity wedge indicating lithospheric delamination which could explain the 200 km deep high-velocity body existing under the southern Dinarides