1,185 research outputs found
Shock creation and particle acceleration driven by plasma expansion into a rarefied medium
The expansion of a dense plasma through a more rarefied ionised medium is a
phenomenon of interest in various physics environments ranging from
astrophysics to high energy density laser- matter laboratory experiments. Here
this situation is modeled via a 1D Particle-In-Cell simulation; a jump in the
plasma density of a factor of 100 is introduced in the middle of an otherwise
equally dense electron-proton plasma with an uniform proton and electron
temperature of 10eV and 1keV respectively. The diffusion of the dense plasma,
through the rarified one, triggers the onset of different nonlinear phenomena
such as a strong ion-acoustic shock wave and a rarefaction wave. Secondary
structures are detected, some of which are driven by a drift instability of the
rarefaction wave. Efficient proton acceleration occurs ahead of the shock,
bringing the maximum proton velocity up to 60 times the initial ion thermal
speed
Autoignition of n-decane Droplets in the Low-, Intermediate-, and High-temperature Regimes from a Mixture Fraction Viewpoint
Detailed numerical simulations of isolated n-decane droplets autoignition are presented for different values of the ambient pressure and temperature. The ignition modes considered included single-stage ignition, twostage ignition and cool-flame ignition. The analysis was conducted from a mixture fraction perspective. Two characteristic chemical time scales were identified for two-stage ignition: one for cool-flame ignition, and another for hot-flame ignition. The appearance and subsequent spatial propagation of a cool flame at lean compositions was found to play an important role in the ignition process, since it created the conditions for activating the hightemperature reactions pathway in regions with locally rich composition. Single-stage ignition was characterized by a single chemical time scale, corresponding to hot-flame ignition. Low-temperature reactions were negligible for this case, and spatial diffusion of heat and chemical species mainly affected the duration of the ignition transient, but not the location in mixture fraction space at which ignition first occurs. Finally, ignition of several cool flames of decreasing strength was observed in the cool-flame ignition case, which eventually lead to a plateau in the maximum gas-phase temperature. The first cool flame ignited in a region where the fuel / air mixture was locally lean, whereas ignition of the remaining cool flames occurred at rich mixture compositions.This is the author accepted manuscript. The final version is available from Springer via http://dx.doi.org/10.1007/s10494-016-9710-
Optimized laser pulse profile for efficient radiation pressure acceleration of ions
The radiation pressure acceleration regime of laser ion acceleration requires
high intensity laser pulses to function efficiently. Moreover the foil should
be opaque for incident radiation during the interaction to ensure maximum
momentum transfer from the pulse to the foil, which requires proper matching of
the target to the laser pulse. However, in the ultrarelativistic regime, this
leads to large acceleration distances, over which the high laser intensity for
a Gaussian laser pulse must be maintained. It is shown that proper tailoring of
the laser pulse profile can significantly reduce the acceleration distance,
leading to a compact laser ion accelerator, requiring less energy to operate.Comment: 10 pages, 4 figure
Infrared spectra of crystalline and glassy silicates and application to interstellar dust
The infrared spectra of crystalline minerals predicted in theoretical condensation sequences do not match the astronomical observations. Since the astronomical spectra are a closer match to glassy silicates, the authors undertook a study to measure the infrared spectra of glassy silicates that have compositions similar to silicate minerals predicted in theoretical condensation sequences. The data should support observations aimed at elucidating condensation chemistry in dust forming regions. The authors measured the mass absorption coefficients, from 2.5 to 25 microns, of ground samples of olivine, diopside, and serpentine and also smoke samples that were prepared from these minerals. The smoke samples prepared in this way are predominantly glassy with nearly the same composition as the parent minerals. The crystalline samples consisted of pure olivine ((Fe(0.1)Mg(0.9))(2)SiO(4)), serpentine, diopside. Sample purity was confirmed by x ray diffraction. Each mineral was ground for 10 hours and a measured mass of the powder was mixed with KBr powder for absorption measurements using the method of Borghesi et a. (1985). The smoke samples were prepared from the same samples used for grinding by vaporizing the minerals using pulsed laser radiation in air. The smoke samples formed by condensation of the resulting vapor. The smoke settled onto infrared transparent KRS-5 substrates and onto a quartz crystal microbalance used to obtain mass measurements. A description of the preparation method is given in Stephens (1980). The glassy diopside showed only diffuse electron diffraction peaks and hence was nearly amorphous, while the serpentine smoke showed a weak diffraction pattern corresponding to MgO. The smoke from olivine showed a weak diffraction pattern corresponding to Fe2O3 and/or Fe3O4. The mass absorption coefficients, from 2.5 to 25 microns, of crystalline diopside, olivine, and serpentine and their corresponding smoke samples are shown in figures
IR emission from circumstellar envelopes of C-rich stars
The reliability of a theoretical model that solves the radiative transfer equation in dust clouds surrounding a central star is checked. In particular, it is found that both classical scattering by dust and the back-heating effects are negligible in the radiative transfer when envelopes similar to IRC+10216 are taken into consideration. In addition, new fits of IRC+10216 spectra are presented which were obtained, when the source is in different luminosity phases, under the assumption that amorphous carbon grains are in the circumstellar envelope. The same model is currently used to simulate the emission from carbon-rich sources showing the silicon carbide feature at 11.3 microns
Direct Numerical Simulations of premixed methane flame initiation by pilot n-heptane spray autoignition
Autoignition of n-heptane sprays in a methane/air mixture and the subsequent methane premixed flame ignition, a constant volume configuration relevant to pilot-ignited dual fuel engines, was investigated by DNS. It was found that reducing the pilot fuel quantity, increases its autoignition time. This is attributed to the faster disappearance of the most reactive mixture fraction (predicted from homogeneous reactor calculations) which is quite rich. Consequently, ignition of the n-heptane occurs at leaner mixtures. The premixed methane flame is eventually ignited due to heating gained by the pressure rise caused by the n-heptane oxidation, and heat and mass transfer of intermediates from the n-heptane autoignition kernels. For large amounts of the pilot fuel, the combustion of the n-heptane results in significant adiabatic compression of the methane–air mixture. Hence the slow methane oxidation is accelerated and is further promoted by the presence of species in the oxidizer stream originating from the already ignited regions. For small amounts of the pilot fuel intermediates reach the oxidizer stream faster due to the very lean mixtures surrounding the n-heptane ignition kernels. Therefore, the premixed methane oxidation is initiated at intermediate temperatures. Depending on the amount of n-heptane, different statistical behaviour of the methane oxidation is observed when this is investigated in a reaction progress variable space. In particular for large amounts of n-heptane the methane oxidation follows roughly an autoignition regime, whereas for small amounts of n-heptane methane oxidation is similar to a canonical premixed flame. The data can be used for validation of various turbulent combustion models for dual-fuel combustion.The computational costs for this work were covered by the EPSRC project ref. no. EP/J021997/1.This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.combustflame.2015.09.01
Shocks in unmagnetized plasma with a shear flow: Stability and magnetic field generation
A pair of curved shocks in a collisionless plasma is examined with a
two-dimensional particle-in-cell (PIC) simulation. The shocks are created by
the collision of two electron-ion clouds at a speed that exceeds everywhere the
threshold speed for shock formation. A variation of the collision speed along
the initially planar collision boundary, which is comparable to the ion
acoustic speed, yields a curvature of the shock that increases with time. The
spatially varying Mach number of the shocks results in a variation of the
downstream density in the direction along the shock boundary. This variation is
eventually equilibrated by the thermal diffusion of ions. The pair of shocks is
stable for tens of inverse ion plasma frequencies. The angle between the mean
flow velocity vector of the inflowing upstream plasma and the shock's
electrostatic field increases steadily during this time. The disalignment of
both vectors gives rise to a rotational electron flow, which yields the growth
of magnetic field patches that are coherent over tens of electron skin depths.Comment: 10 pages, 10 figures accepted for publication in Physics of Plasma
Magnetic instability in a dilute circular rarefaction wave
The growth of magnetic fields in the density gradient of a rarefaction wave has been observed in simulations and in laboratory experiments. The thermal anisotropy of the electrons, which gives rise to the magnetic instability, is maintained by the ambipolar electric field. This simple mechanism could be important for the magnetic field amplification in astrophysical jets or in the interstellar medium ahead of supernova remnant shocks. The acceleration of protons and the generation of a magnetic field by the rarefaction wave, which is fed by an expanding circular plasma cloud, is examined here in form of a 2D particle-in-cell simulation. The core of the plasma cloud is modeled by immobile charges, and the mobile protons form a small ring close to the cloud's surface. The number density of mobile protons is thus less than that of the electrons. The protons of the rarefaction wave are accelerated to 1/10 of the electron thermal speed, and the acceleration results in a thermal anisotropy of the electron distribution in the entire plasma cloud. The instability in the rarefaction wave is outrun by a TM wave, which grows in the dense core distribution, and its magnetic field expands into the rarefaction wave. This expansion drives a secondary TE wave. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4769128]</p
Experimental evidence for amorphous carbon grains in comets
Amorphous carbon grains similar to those produced in the laboratory, but with a higher hydrogen content, appear to be good candidates to simulate both the IR continuum emission and the 3.4 micron band measured for P/Halley. The comparison of the cometary features with those detected in the laboratory for carbon grains characterized by various sp(exp 2)/sp(exp 3) ratios seems to indicate that a prevalent diamond-like (sp(exp 3)) structure should be present in cometary particles. These kinds of solid particles seem also suitable to explain the daily and monthly variations of the 3.4 micron band intensity, relative to the continuum, and, at the same time,- to fulfill the abundance constraints. The same grains appear to be able to reproduce the absorption bands detected in the IR galactic source IRS 7. This result may be considered as a first experimental evidence of a relation existing between interstellar dust and cometary materials
Recommended from our members
Numerical investigation of kerosene single droplet ignition at high-altitude relight conditions
In this study, the fundamental problem of the ignition of a
kerosene single droplet in a quiescent medium at engine high-altitude
relight conditions is investigated using numerical simulations. The main
objective is to improve the understanding of ignition phenomena with a
focus on the effect of droplet evaporation in determining the growth of
the ignition kernel and flame establishment. Results show that when the
droplet is fully immersed in a high temperature region, ignition occurs
when the scalar dissipation rate associated with evaporation decreases
enough to allow the initiation of a flame. The ignition time depends on
the droplet diameter and the far field temperature, i.e. the position of
the droplet with respect to the spark location. As the fuel is consumed,
the flame is found to move closer to the droplet surface until the flame
cannot sustain itself any more due to increasing scalar dissipation
rates. Furthermore, results show that at very low temperatures typical of
high-altitude relight conditions no flammable mixture is available around
the droplet. Therefore, the success of an ignition event mainly depends
on the energy released by the spark and the rate at which this energy is
diffused toward the droplet surface to enhance the evaporation rate and
create a flammable mixture. The findings are analysed from the
perspective of gas turbine applications
- …