84 research outputs found
Automated Subsystem Control for Life Support System (ASCLSS)
The Automated Subsystem Control for Life Support Systems (ASCLSS) program has successfully developed and demonstrated a generic approach to the automation and control of space station subsystems. The automation system features a hierarchical and distributed real-time control architecture which places maximum controls authority at the lowest or process control level which enhances system autonomy. The ASCLSS demonstration system pioneered many automation and control concepts currently being considered in the space station data management system (DMS). Heavy emphasis is placed on controls hardware and software commonality implemented in accepted standards. The approach demonstrates successfully the application of real-time process and accountability with the subsystem or process developer. The ASCLSS system completely automates a space station subsystem (air revitalization group of the ASCLSS) which moves the crew/operator into a role of supervisory control authority. The ASCLSS program developed over 50 lessons learned which will aide future space station developers in the area of automation and controls.
Paper Session II-B - Automated Launch Vehicle Command & Control Center
The current U.S. earth-to-orbit expendable launch vehicles (ELVs) and space transportation systems (STS) require labor intensive, expensive launch site preparations, on-pad vehicle checkout, and launch support. By using state of the art, commercially available technology, these operations can be automated to reduce costs and improve mission success. In addition, the technology allows remote launch monitoring and personnel reductions at the launch site. Today\u27s industrial work stations, computers, communications hardware, and data bus equipment, in use throughout the process control industry, can be integrated with existing avionics and organized into a modern avionics architecture. Such an architecture could replace the current launch site, push button implemented, command and control and the plethora of strip chart performance monitoring systems. The new avionics architecture defined by Honeywell features a user friendly electronic data base/archiving system coupled to a realtime command/control capability. It is designed to automate much of the launch operations, significantly reducing the current standing army and high associated costs of supporting today\u27s launch systems
The Frequency of Barred Spiral Galaxies in the Near-IR
We have determined the fraction of barred galaxies in the H-band for a
statistically well-defined sample of 186 spirals drawn from the Ohio State
University Bright Spiral Galaxy survey. We find 56% of our sample to be
strongly barred at H, while another 16% is weakly barred. Only 27% of our
sample is unbarred in the near-infrared. The RC3 and the Carnegie Atlas of
Galaxies both classify only about 30% of our sample as strongly barred. Thus
strong bars are nearly twice as prevalent in the near-infrared as in the
optical. The frequency of genuine optically hidden bars is significant, but
lower than many claims in the literature: 40% of the galaxies in our sample
that are classified as unbarred in the RC3 show evidence for a bar in the
H-band, while for the Carnegie Atlas this fraction is 66%. Our data reveal no
significant trend in bar fraction as a function of morphology in either the
optical or H-band. Optical surveys of high redshift galaxies may be strongly
biased against finding bars, as bars are increasingly difficult to detect at
bluer rest wavelengths.Comment: LaTeX with AASTeX style file, 23 pages with 6 figures. Accepted for
publication in The Astronomical Journal (Feb. 2000
Novel sulI binary vectors enable an inexpensive foliar selection method in Arabidopsis
<p>Abstract</p> <p>Background</p> <p>Sulfonamide resistance is conferred by the <it>sul</it>I gene found on many <it>Enterobacteriaceae </it>R plasmids and Tn21 type transposons. The <it>sul</it>I gene encodes a sulfonamide insensitive dihydropteroate synthase enzyme required for folate biosynthesis. Transformation of tobacco, potato or <it>Arabidopsis </it>using <it>sul</it>I as a selectable marker generates sulfadiazine-resistant plants. Typically <it>sul</it>I-based selection of transgenic plants is performed on tissue culture media under sterile conditions.</p> <p>Findings</p> <p>A set of novel binary vectors containing a <it>sul</it>I selectable marker expression cassette were constructed and used to generate transgenic <it>Arabidopsis</it>. We demonstrate that the <it>sul</it>I selectable marker can be utilized for direct selection of plants grown in soil with a simple foliar spray application procedure. A highly effective and inexpensive high throughput screening strategy to identify transgenic <it>Arabidopsis </it>without use of tissue culture was developed.</p> <p>Conclusion</p> <p>Novel <it>sul</it>I-containing <it>Agrobacterium </it>binary vectors designed to over-express a gene of interest or to characterize a test promoter in transgenic plants have been constructed. These new vector tools combined with the various beneficial attributes of sulfonamide selection and the simple foliar screening strategy provide an advantageous alternative for plant biotechnology researchers. The set of binary vectors is freely available upon request.</p
Tension, Free Space, and Cell Damage in a Microfluidic Wound Healing Assay
We use a novel, microfluidics-based technique to deconstruct the classical wound healing scratch assay, decoupling the contribution of free space and cell damage on the migratory dynamics of an epithelial sheet. This method utilizes multiple laminar flows to selectively cleave cells enzymatically, and allows us to present a 'damage free' denudation. We therefore isolate the influence of free space on the onset of sheet migration. First, we observe denudation directly to measure the retraction in the cell sheet that occurs after cell-cell contact is broken, providing direct and quantitative evidence of strong tension within the sheet. We further probe the mechanical integrity of the sheet without denudation, instead using laminar flows to selectively inactivate actomyosin contractility. In both cases, retraction is observed over many cell diameters. We then extend this method and complement the enzymatic denudation with analogies to wounding, including gradients in signals associated with cell damage, such as reactive oxygen species, suspected to play a role in the induction of movement after wounding. These chemical factors are evaluated in combination with the enzymatic cleavage of cells, and are assessed for their influence on the collective migration of a non-abrasively denuded epithelial sheet. We conclude that free space alone is sufficient to induce movement, but this movement is predominantly limited to the leading edge, leaving cells further from the edge less able to move towards the wound. Surprisingly, when coupled with a gradient in ROS to simulate the chemical effects of abrasion however, motility was not restored, but further inhibited.Massachusetts Institute of Technology. Presidential FellowshipNational Institutes of Health (U.S.). Biotechnology Training FellowshipSingapore-MIT Alliance for Research and TechnologyMassachusetts Institute of Biotechnology Training GrantMassachusetts Institute of Technology (Open-source Funding
Molecular Biomechanics: The Molecular Basis of How Forces Regulate Cellular Function
Recent advances have led to the emergence of molecular biomechanics as an essential element of modern biology. These efforts focus on theoretical and experimental studies of the mechanics of proteins and nucleic acids, and the understanding of the molecular mechanisms of stress transmission, mechanosensing and mechanotransduction in living cells. In particular, single-molecule biomechanics studies of proteins and DNA, and mechanochemical coupling in biomolecular motors have demonstrated the critical importance of molecular mechanics as a new frontier in bioengineering and life sciences. To stimulate a more systematic study of the basic issues in molecular biomechanics, and attract a broader range of researchers to enter this emerging field, here we discuss its significance and relevance, describe the important issues to be addressed and the most critical questions to be answered, summarize both experimental and theoretical/computational challenges, and identify some short-term and long-term goals for the field. The needs to train young researchers in molecular biomechanics with a broader knowledge base, and to bridge and integrate molecular, subcellular and cellular level studies of biomechanics are articulated.National Institutes of Health (U.S.) (grant UO1HL80711-05 to GB)National Institutes of Health (U.S.) (grant R01GM076689-01)National Institutes of Health (U.S.) (grant R01AR033236-26)National Institutes of Health (U.S.) (grant R01GM087677-01A1)National Institutes of Health (U.S.) (grant R01AI44902)National Institutes of Health (U.S.) (grant R01AI38282)National Science Foundation (U.S.) (grant CMMI-0645054)National Science Foundation (U.S.) (grant CBET-0829205)National Science Foundation (U.S.) (grant CAREER-0955291
Micromechanical Properties of Injection-Molded Starch–Wood Particle Composites
The micromechanical properties of injection molded starch–wood particle composites were investigated as a function of particle content and humidity conditions.
The composite materials were characterized by scanning electron microscopy and X-ray diffraction methods. The microhardness
of the composites was shown to increase notably with the concentration of the wood particles. In addition,creep behavior under the indenter and temperature dependence
were evaluated in terms of the independent contribution of the starch matrix and the wood microparticles to the hardness value. The influence of drying time on the density
and weight uptake of the injection-molded composites was highlighted. The results revealed the role of the mechanism of water evaporation, showing that the dependence of water uptake and temperature was greater for the starch–wood composites than for the pure starch sample. Experiments performed during the drying process at 70°C indicated that
the wood in the starch composites did not prevent water loss from the samples.Peer reviewe
The association between internet addiction and psychiatric co-morbidity: a meta-analysis
2012 ACCF/AHA/ACP/AATS/PCNA/SCAI/STS guideline for the diagnosis and management of patients with stable ischemic heart disease
The recommendations listed in this document are, whenever possible, evidence based. An extensive evidence review was conducted as the document was compiled through December 2008. Repeated literature searches were performed by the guideline development staff and writing committee members as new issues were considered. New clinical trials published in peer-reviewed journals and articles through December 2011 were also reviewed and incorporated when relevant. Furthermore, because of the extended development time period for this guideline, peer review comments indicated that the sections focused on imaging technologies required additional updating, which occurred during 2011. Therefore, the evidence review for the imaging sections includes published literature through December 2011
- …