819 research outputs found
Multiscale model calibration by inverse analysis for nonlinear simulation of masonry structures under earthquake loading
The prediction of the structural response of masonry structures under extreme loading conditions, including earthquakes,requiresthe use of advanced material descriptionsto represent the nonlinear behaviour of masonry. In general, micro-and mesoscale approaches are very computationally demanding, thus at present they are used mainly for detailed analysis of small masonry components. Conversely macroscale models, where masonry is assumed as a homogeneous material, aremore efficient and suitable for nonlinear analysis of realistic masonry structures. However, the calibration of the material parameters for such models, which is generally basedon physical testing of entire masonry components, remains an open issue. In this paper, a multiscale approach is proposed, in which an accuratemesoscale modelaccounting for the specific masonry bond is utilised invirtual tests for the calibration of a more efficient macroscale representation assumingenergy equivalence between the two scales. Since the calibration is performed offlineat the beginning of the analysis, the method is computationally attractive compared to alternativehomogenisation techniques. The proposed methodologyis applied to a case study consideringthe results obtained in previous experimental testson masonry components subjected to cyclic loading, and on a masonry building under pseudo-dynamic conditions representingearthquake loading.The results confirmthepotential of the proposedapproach and highlight somecritical issues, such asthe importance of selecting appropriatevirtual tests for model calibration,which can significantlyinfluence accuracy and robustness
Mesoscale modelling of a masonry building subjected to earthquake loading
Masonry structures constitute an important part of the built environment and architectural heritage in seismic areas. A large number of these old structures showed inadequate performance and suffered substantial damage under past earthquakes. Realistic numerical models are required for accurate response predictions and for addressing the implementation of effective strengthening solutions. A comprehensive mesoscale modeling strategy explicitly allowing for masonry bond is presented in this paper. It is based on advanced nonlinear material models for interface elements simulating cracks in mortar joints and brick/block units under cyclic loading. Moreover, domain decomposition and mesh tying techniques are used to enhance computational efficiency in detailed nonlinear simulations. The potential of this approach is shown with reference to a case study of a full-scale unreinforced masonry building previously tested in laboratory under pseudodynamic loading. The results obtained confirm that the proposed modeling strategy for brick/block-masonry structures leads to accurate representations of the seismic response of three-dimensional (3D) building structures, both at the local and global levels. The numerical-experimental comparisons show that this detailed modeling approach enables remarkably accurate predictions of the actual dynamic characteristics, along with the main resisting mechanisms and crack patterns
Identification of mesoscale model parameters for brick-masonry
Realistic assessment of existing masonry structures requires the use of detailed nonlinear numerical descriptions with accurate model material parameters. In this work, a novel numerical-experimental strategy for the identification of the main material parameters of a detailed nonlinear brick-masonry mesoscale model is presented. According to the proposed strategy, elastic material parameters are obtained from the results of diagonal compression tests, while a flat-jack test, purposely designed for in-situ investigations, is used to determine the material parameters governing the nonlinear behaviour. The identification procedure involves: a) the definition of a detailed finite element (FE) description for the tests; b) the development and validation of an efficient metamodel; c) the global sensitivity analysis for parameter reduction; and d) the minimisation of a functional representing the discrepancy between experimental and numerical data. The results obtained by applying the proposed strategy in laboratory tests are discussed in the paper. These results confirm the accuracy of the developed approach for material parameter identification, which can be used also in combination with in-situ tests for assessing existing structures. Practical and theoretical aspects related to the proposed flat-jack test, the experimental data to be considered in the process and the post-processing methodology are critically discussed
Prevention of infection and disruption of the pathogen transfer chain in elective surgery
The COVID-19 pandemic has caused us all to stop our normal activities and consider how we can safely return to caring for our patients. There are many common practices (such as an increased use of personal protective equipment) which we are all familiar with that can be easily incorporated into our daily routines. Other actions, such as cleaning more surfaces with solutions such as dilute povidone iodine or changing the air filtration systems used within operating room theaters, may require more extensive efforts on our behalf. In this article, we have attempted to highlight some of the changes that arthroplasty surgeons may need to instigate when we are able to resume elective joint arthroplasty procedures in an effort to disrupt the chain of pathogen transfer
Neuroplastic Changes Following Brain Ischemia and their Contribution to Stroke Recovery: Novel Approaches in Neurorehabilitation
Ischemic damage to the brain triggers substantial reorganization of spared areas and pathways, which is associated with limited, spontaneous restoration of function. A better understanding of this plastic remodeling is crucial to develop more effective strategies for stroke rehabilitation. In this review article, we discuss advances in the comprehension of post-stroke network reorganization in patients and animal models. We first focus on rodent studies that have shed light on the mechanisms underlying neuronal remodeling in the perilesional area and contralesional hemisphere after motor cortex infarcts. Analysis of electrophysiological data has demonstrated brain-wide alterations in functional connectivity in both hemispheres, well beyond the infarcted area. We then illustrate the potential use of non-invasive brain stimulation (NIBS) techniques to boost recovery. We finally discuss rehabilitative protocols based on robotic devices as a tool to promote endogenous plasticity and functional restoration
The Medication Adherence Report Scale (MARS-5): a measurement tool for eliciting patientsâ reports of non-adherence
Aims:
This study aimed to develop a questionnaire measure of patients' adherence to medications to elicit patients' report of medication use. The reliability and validity were assessed in patients with hypertension. Additional analyses were performed on other patient groups.
Methods:
Using a crossâsectional study design, a 10âitem version of the Medication Adherence Report Scale (MARS)© Professor Rob Horne was piloted in two samples of patients receiving treatment for hypertension (n=50 + 178), asthma (n=100) or diabetes (n=100) at hospital outpatient or community clinics in London and the SouthâEast of England. Following principal components analysis, five items were retained to form the âMARSâ5'©Professor Rob Horne. Evaluation comprised internal reliability, testâretest reliability, criterionârelated validity (relationship with blood pressure control) and construct validity (relationship with patients' beliefs about medicines).
Results:
The MARSâ5 demonstrated acceptable reliability (internal and testâretest) and validity (criterionârelated and construct validity). Internal reliability (Cronbach's α) ranged from 0.67 to 0.89 across all patient groups; testâretest reliability (Pearson's r) was 0.97 in Hypertension. Criterionârelated validity was established with more adherent hypertension patients showing better bloodâpressure control (Ï2=4.24, df=1, p<0.05). Construct validity with beliefs about medicines was demonstrated with higher adherence associated with stronger beliefs in treatment necessity, and lower concerns.
Conclusions:
The MARSâ5 performed well on several psychometric indicators. It shows promise as an effective selfâreport tool for measuring patients' reports of their medication use across a range of health conditions
A randomized clinical control study on the efficacy of three-dimensional upper limb robotic exoskeleton training in chronic stroke
Background : Although robotics assisted rehabilitation has proven to be effective in stroke rehabilitation, a limited functional improvements in Activities of Daily Life has been also observed after the administration of robotic training. To this aim in this study we compare the efficacy in terms of both clinical and functional outcomes of a robotic training performed with a multi-joint functional exoskeleton in goal-oriented exercises compared to a conventional physical therapy program, equally matched in terms of intensity and time. As a secondary goal of the study, it was assessed the capability of kinesiologic measurementsâextracted by the exoskeleton robotic systemâof predicting the rehabilitation outcomes using a set of robotic biomarkers collected at the baseline. Methods : A parallel-group randomized clinical trial was conducted within a group of 26 chronic post-stroke patients. Patients were randomly assigned to two groups receiving robotic or manual therapy. The primary outcome was the change in score on the upper extremity section of the Fugl-Meyer Assessment (FMA) scale. As secondary outcome a specifically designed bimanual functional scale, Bimanual Activity Test (BAT), was used for upper limb functional evaluation. Two robotic performance indices were extracted with the purpose of monitoring the recovery process and investigating the interrelationship between pre-treatment robotic biomarkers and post-treatment clinical improvement in the robotic group. Results : A significant clinical and functional improvements in both groups (p < 0.01) was reported. More in detail a significantly higher improvement of the robotic group was observed in the proximal portion of the FMA (p < 0.05) and in the reduction of time needed for accomplishing the tasks of the BAT (p < 0.01). The multilinear-regression analysis pointed out a significant correlation between robotic biomarkers at the baseline and change in FMA score (R2 = 0.91, p < 0.05), suggesting their potential ability of predicting clinical outcomes. Conclusion : Exoskeleton-based robotic upper limb treatment might lead to better functional outcomes, if compared to manual physical therapy. The extracted robotic performance could represent predictive indices of the recovery of the upper limb. These results are promising for their potential exploitation in implementing personalized robotic therapy. Clinical Trial Registration clinicaltrials.gov, NCT03319992 Unique Protocol ID: RH-UL-LEXOS-10. Registered 20.10.2017, https://clinicaltrials.gov/ct2/show/NCT0331999
The dependence of intrinsic alignment of galaxies on wavelength using KiDS and GAMA
The outer regions of galaxies are more susceptible to the tidal interactions
that lead to intrinsic alignments of galaxies. The resulting alignment signal
may therefore depend on the passband if the colours of galaxies vary spatially.
To quantify this, we measured the shapes of galaxies with spectroscopic
redshifts from the GAMA survey using deep gri imaging data from the KiloDegree
Survey. The performance of the moment-based shape measurement algorithm DEIMOS
was assessed using dedicated image simulations, which showed that the
ellipticities could be determined with an accuracy better than 1% in all bands.
Additional tests for potential systematic errors did not reveal any issues. We
measure a significant difference of the alignment signal between the g,r and
i-band observations. This difference exceeds the amplitude of the linear
alignment model on scales below 2 Mpc/h. Separating the sample into
central/satellite and red/blue galaxies, we find that that the difference is
dominated by red satellite galaxies.Comment: 16 pages, 13 figures, accepted, to appear in A&
Fluctuating Dark Energy and the Luminosity Distance
The origin of dark energy driving the accelerated expansion of the universe
is still mysterious. We explore the possibility that dark energy fluctuates,
resulting in spatial correlations. Due to these fluctuations, the Hubble rate
itself becomes a fluctuating quantity. We discuss the effect this has on
measurements of type Ia supernovae, which are used to constrain the luminosity
distance. We show that the luminosity distance is affected by spatial
correlations in several ways. First, the luminosity distance becomes dressed by
the fluctuations, thereby differing from standard CDM. Second, angular
correlations become visible in the two-point correlation function of the
luminosity distance. To investigate the latter we construct the angular power
spectrum of luminosity distance fluctuations. We then perform a forecast for
two supernova surveys, the ongoing Dark Energy Survey (DES) and the upcoming
Legacy Survey of Space and Time (LSST), and compare this effect with
relativistic lensing effects from perturbed CDM. We find that the
signal can rise above the lensing effects and that LSST could test this effect
for a large part of the parameter space. As an example, a specific realisation
of such a scenario is that quantum fluctuations of some field in the early
universe imprint spatial correlations with a predictable form in the dark
energy density today. In this case, the Hubble rate fluctuates due to the
intrinsic quantum nature of the dark energy density field. We study whether the
signal of this specific model would be measurable, and conclude that testing
this model with LSST would be challenging. However, taking into account a speed
of sound of the dark energy fluid can make this model observable.Comment: 38 pages, 9 figure
- âŠ