75 research outputs found

    袨小袨袘袥袠袙袨小孝袉 袩袪袨肖袝小袉袡袧袨袚袨 袙袠袘袨袪校 小孝校袛袝袧孝袉袙-袩袪袨袙袉袟袨袪袉袙

    Get PDF
    The article covers the factors of the professional self-determination of students-pharmacists in the phase of professional education. The social and subjective factors have the highest priority in their choice of profession. In their choice of profession the respondents faced some problems: the influence of their parents鈥 position, unsoundness of their profession choice, insufficient information about their future activity, enthusiasm about the appearance of the profession. The most adequate approach to providing assistance to the young person in the period of their professional choice is the psychological and pedagogical support that promotes development of internal conditions of professional self-identification.聽 The low activity of the self-determination subject is the feature of pharmacists鈥 professional self-determination.校 褋褌邪褌褌褨 胁懈褋胁褨褌谢械薪芯 褔懈薪薪懈泻懈 锌褉芯褎械褋褨泄薪芯谐芯 褋邪屑芯胁懈蟹薪邪褔械薪薪褟 褋褌褍写械薪褌褨胁-锌褉芯胁褨蟹芯褉褨胁 薪邪 械褌邪锌褨 锌褉芯褎械褋褨泄薪芯谐芯 薪邪胁褔邪薪薪褟. 袩褉褨芯褉懈褌械褌薪懈屑懈 褍 胁懈斜芯褉褨 锌褉芯褎械褋褨褩 褦 褋芯褑褨邪谢褜薪褨 褌邪 褋褍斜鈥櫻斝貉傂感残窖 褔懈薪薪懈泻懈. 袪械褋锌芯薪写械薪褌懈 褍 胁懈斜芯褉褨 锌褉芯褎械褋褨褩 蟹褍褋褌褉褨谢懈褋褜 蟹 锌褉芯斜谢械屑邪屑懈: 胁锌谢懈胁褍 锌芯蟹懈褑褨褩 斜邪褌褜泻褨胁, 薪械芯斜覒褉褍薪褌芯胁邪薪褨褋褌褞 胁懈斜芯褉褍 锌褉芯褎械褋褨褩, 薪械写芯褋褌邪褌薪褜芯褞 褨薪褎芯褉屑芯胁邪薪褨褋褌褞 锌褉芯 屑邪泄斜褍褌薪褞 写褨褟谢褜薪褨褋褌褜, 蟹邪褏芯锌谢械薪薪褟屑 蟹芯胁薪褨褕薪褜芯褞 褋褌芯褉芯薪芯褞 锌褉芯褎械褋褨褩. 袨褋芯斜谢懈胁i褋褌褞 锌褉芯褎械褋褨泄薪芯谐芯 褋邪屑芯胁懈蟹薪邪褔械薪薪褟 锌褉芯胁褨蟹芯褉褨胁 褦 薪懈蟹褜泻邪 邪泻褌懈胁薪褨褋褌褜 褋褍斜鈥櫻斝貉傂 褋邪屑芯胁懈蟹薪邪褔械薪薪褟. 袧邪泄邪写械泻胁邪褌薪褨褕懈屑 锌褨写褏芯写芯屑 写芯 薪邪写邪薪薪褟 写芯锌芯屑芯谐懈 屑芯谢芯写褨泄 谢褞写懈薪褨 褍 锌械褉褨芯写 锌褉芯褎械褋褨泄薪芯谐芯 胁懈斜芯褉褍 褦 锌褋懈褏芯谢芯谐芯-锌械写邪谐芯谐褨褔薪懈泄 褋褍锌褉芯胁褨写, 褟泻懈泄 褋锌褉懈褟褦 褋褌胁芯褉械薪薪褞 胁薪褍褌褉褨褕薪褨褏 褍屑芯胁 锌褉芯褎械褋褨泄薪芯谐芯 褋邪屑芯胁懈蟹薪邪褔械薪薪褟

    楔袥携啸袠 袣袨袪袝袣笑袉袊 袨小孝袝袨袛袝肖袉笑袠孝校 袩袪袠 啸袪袨袧袉效袧袨袦校 袩袗袧袣袪袝袗孝袠孝袉

    Get PDF
    Summary. Background osteodeficiency states at chronic pancreatitis is caused by disorders of digestion that appears malabsorbtion and 聽maldigestion syndromes and in violation of assimilation of mineral and organic matter. A key point in the development osteodeficiency in chronic pancreatitis is certainly a deficiency of calcium and vitamin D3. Osteodeficiency in CP components can be as osteomalacia (vitamin deficiencies due to vitamin D3), and osteoporosis (violation of calcium-phosphorus, protein metabolism, secondary, and because primary osteoporosis - age, postmenopausal). In order to assess the status of bone mineral density examination of patients underwent lumbar spine using two-photon X-ray densitometer. Found that in 75% of patients with chronic pancreatitis observed violations of bone mineralisation.Past studies substantiate the feasibility of sharing calcium-vitamin and mineral preparations and bisphosphonate ryzendronic acid in the proposed scheme concomitant treatment of osteoporosis in patients with chronic pancreatitis. The expediency of using drugs Vitrum Kaltsium 600 + D400 and Ryzendros in treatment of patients with chronic pancreatitis with concomitant osteodeficiency, leading to substantial significant improvement in bone mineral - growth of bone mineral density.袗泻褌褍邪谢褜薪芯褋褌褜 锌褉芯斜谢械屑褘 褉邪蟹胁懈褌懈褟 芯褋褌械芯写械褎懈褑懈褌薪懈褏 褋芯褋褌芯褟薪懈泄 锌褉懈 褏褉芯薪懈褔械褋泻芯屑 锌邪薪泻褉械邪褌懈褌械 芯斜褍褋谢芯胁谢械薪邪 褉邪褋褋褌褉芯泄褋褌胁邪屑懈 锌褉芯褑械褋褋芯胁 锌懈褖械胁邪褉械薪懈褟, 褋懈薪写褉芯屑邪屑懈 屑邪谢褜写懈谐械褋褌懈懈 懈 屑邪谢褜邪斜褋芯褉斜褑懈懈 褋 薪邪褉褍褕械薪懈械屑 褍褋胁芯械薪懈褟 屑懈薪械褉邪谢褜薪褘褏 懈 芯褉谐邪薪懈褔械褋泻懈褏 胁械褖械褋褌胁.聽袣谢褞褔械胁褘屑 屑芯屑械薪褌芯屑 胁 褉邪蟹胁懈褌懈懈 芯褋褌械芯写械褎懈褑懈褌邪 锌褉懈 褏褉芯薪懈褔械褋泻芯屑 锌邪薪泻褉械邪褌懈褌械, 斜械蟹褍褋谢芯胁薪芯, 褟胁谢褟械褌褋褟 写械褎懈褑懈褌 泻邪谢褜褑懈褟 懈 胁懈褌邪屑懈薪邪 D3.聽袨褋褌械芯写械褎懈褑懈褌 锌褉懈 啸袩 屑芯卸械褌 懈屑械褌褜 泻芯屑锌芯薪械薪褌褘 泻邪泻 芯褋褌械芯屑邪谢褟褑懈懈 (胁褋谢械写褋褌胁懈械 谐懈锌芯胁懈褌邪屑懈薪芯蟹邪 胁懈褌邪屑懈薪邪 D3), 褌邪泻 懈 芯褋褌械芯锌芯褉芯蟹邪 (薪邪褉褍褕械薪懈褟 泻邪谢褜褑懈械胁芯-褎芯褋褎芯褉薪芯谐芯, 斜械谢泻芯胁芯谐芯 芯斜屑械薪芯胁 胁褌芯褉懈褔薪芯, 邪 褌邪泻卸械 胁褋谢械写褋褌胁懈械 锌械褉胁懈褔薪芯谐芯 芯褋褌械芯锌芯褉芯蟹邪 - 胁芯蟹褉邪褋褌薪芯谐芯, 锌芯褋褌屑械薪芯锌邪褍蟹邪谢褜薪芯谐芯).聽小 褑械谢褜褞 芯褑械薪泻懈 褋芯褋褌芯褟薪懈褟 屑懈薪械褉邪谢褜薪芯泄 锌谢芯褌薪芯褋褌懈 泻芯褋褌薪芯泄 褌泻邪薪懈 斜芯谢褜薪褘屑 锌褉芯胁芯写懈谢懈 芯斜褋谢械写芯胁邪薪懈械 锌芯褟褋薪懈褔薪芯谐芯 芯褌写械谢邪 锌芯蟹胁芯薪芯褔薪懈泻邪 褋 锌芯屑芯褖褜褞 写胁芯褎芯褌芯薪薪芯谐芯 褉械薪褌谐械薪芯胁褋泻芯谐芯 写械薪褋懈褌芯屑械褌褉邪.聽校褋褌邪薪芯胁谢械薪芯, 褔褌芯 褍 75% 芯斜褋谢械写芯胁邪薪薪褘褏 斜芯谢褜薪褘褏 褏褉芯薪懈褔械褋泻懈屑 锌邪薪泻褉械邪褌懈褌芯屑 薪邪斜谢褞写邪褞褌褋褟 薪邪褉褍褕械薪懈褟 屑懈薪械褉邪谢懈蟹邪褑懈懈 泻芯褋褌薪芯泄 褌泻邪薪懈. 袩褉芯胁械写械薪薪褘械 懈褋褋谢械写芯胁邪薪懈褟 芯斜芯褋薪芯胁褘胁邪褞褌 褑械谢械褋芯芯斜褉邪蟹薪芯褋褌褜 褋芯胁屑械褋褌薪芯谐芯 懈褋锌芯谢褜蟹芯胁邪薪懈褟 泻邪谢褜褑懈泄褋芯写械褉卸邪褖械谐芯 胁懈褌邪屑懈薪薪芯-屑懈薪械褉邪谢褜薪芯谐芯 锌褉械锌邪褉邪褌邪 懈 斜懈褋褎芯褋褎芯薪邪褌邪 - 褉懈蟹械薪写褉芯薪芯胁芯泄 泻懈褋谢芯褌褘 锌芯 锌褉械写谢芯卸械薪薪芯泄 褋褏械屑械 胁 谢械褔械薪懈懈 褋芯锌褍褌褋褌胁褍褞褖械谐芯 芯褋褌械芯锌芯褉芯蟹邪 褍 斜芯谢褜薪褘褏 褏褉芯薪懈褔械褋泻懈屑 锌邪薪泻褉械邪褌懈褌芯屑.聽 袛芯泻邪蟹邪薪邪 褑械谢械褋芯芯斜褉邪蟹薪芯褋褌褜 懈褋锌芯谢褜蟹芯胁邪薪懈褟 锌褉械锌邪褉邪褌芯胁 袙懈褌褉褍屑 袣邪谢褜褑懈褍屑 600 + D400 懈 袪懈蟹械薪写褉芯褋 胁 泻芯屑锌谢械泻褋薪芯屑 谢械褔械薪懈懈 斜芯谢褜薪褘褏 褏褉芯薪懈褔械褋泻懈屑 锌邪薪泻褉械邪褌懈褌芯屑 褋 褋芯锌褍褌褋褌胁褍褞褖懈屑 芯褋褌械芯写械褎懈褑懈褌褍, 褔褌芯 锌褉懈胁械谢芯 泻 褋褍褖械褋褌胁械薪薪芯屑褍 写芯褋褌芯胁械褉薪芯屑褍 褍谢褍褔褕械薪懈褞 褋芯褋褌芯褟薪懈褟 屑懈薪械褉邪谢懈蟹邪褑懈懈 泻芯褋褌懈 - 锌褉懈褉芯褋褌褍 屑懈薪械褉邪谢褜薪芯泄 锌谢芯褌薪芯褋褌懈 泻芯褋褌薪芯泄 褌泻邪薪懈.袪械蟹褞屑械. 袗泻褌褍邪谢褜薪褨褋褌褜 锌褉芯斜谢械屑懈 褉芯蟹胁懈褌泻褍 芯褋褌械芯写械褎褨褑懈褌薪懈褏 褋褌邪薪褨胁 锌褉懈 褏褉芯薪褨褔薪芯屑褍 锌邪薪泻褉械邪褌懈褌褨 蟹褍屑芯胁谢械薪邪 褉芯蟹谢邪写邪屑懈 锌褉芯褑械褋褨胁 褌褉邪胁谢械薪薪褟, 褖芯 胁懈褟胁谢褟褦褌褜褋褟 褋懈薪写褉芯屑邪屑懈 屑邪谢褜写懈谐械褋褌褨褩 褌邪 屑邪谢褜邪斜褋芯褉斜褑褨褩 蟹 锌芯褉褍褕械薪薪褟屑 蟹邪褋胁芯褦薪薪褟 屑褨薪械褉邪谢褜薪懈褏 褨 芯褉谐邪薪褨褔薪懈褏 褉械褔芯胁懈薪. 袣谢褞褔芯胁懈屑 屑芯屑械薪褌芯屑 褍 褉芯蟹胁懈褌泻褍 芯褋褌械芯写械褎褨褑懈褌褍 锌褉懈 褏褉芯薪褨褔薪芯屑褍 锌邪薪泻褉械邪褌懈褌褨, 斜械蟹褍屑芯胁薪芯, 褦 写械褎褨褑懈褌 泻邪谢褜褑褨褞 褌邪 胁褨褌邪屑褨薪褍 D3. 袨褋褌械芯写械褎褨褑懈褌 锌褉懈 啸袩聽 屑芯卸械 屑邪褌懈 泻芯屑锌芯薪械薪褌懈 褟泻 芯褋褌械芯屑邪谢褟褑褨褩 (胁薪邪褋谢褨写芯泻 谐褨锌芯胁褨褌邪屑褨薪芯蟹褍 胁褨褌邪屑褨薪褍 D3), 褌邪泻 褨 芯褋褌械芯锌芯褉芯蟹褍 (锌芯褉褍褕械薪薪褟 泻邪谢褜褑褨褦胁芯-褎芯褋褎芯褉薪芯谐芯, 斜褨谢泻芯胁芯谐芯 芯斜屑褨薪褨胁 胁褌芯褉懈薪薪芯, 邪 褌邪泻芯卸 胁薪邪褋谢褨写芯泻 锌械褉胁懈薪薪芯谐芯 芯褋褌械芯锌芯褉芯蟹褍 鈥 胁褨泻芯胁芯谐芯, 锌芯褋褌屑械薪芯锌邪褍蟹邪谢褜薪芯谐芯). 袟 屑械褌芯褞 芯褑褨薪泻懈 褋褌邪薪褍 屑褨薪械褉邪谢褜薪芯褩 褖褨谢褜薪芯褋褌褨 泻褨褋褌泻芯胁芯褩 褌泻邪薪懈薪懈 褏胁芯褉懈屑 锌褉芯胁芯写懈谢懈 芯斜褋褌械卸械薪薪褟 锌芯锌械褉械泻芯胁芯谐芯 胁褨写写褨谢褍 褏褉械斜褌邪 蟹邪 写芯锌芯屑芯谐芯褞 写胁芯褎芯褌芯薪薪芯谐芯 褉械薪褌谐械薪褨胁褋褜泻芯谐芯 写械薪褋懈褌芯屑械褌褉邪. 袙褋褌邪薪芯胁谢械薪芯, 褖芯 褍 75 % 芯斜褋褌械卸械薪懈褏 褏胁芯褉懈褏 薪邪聽 褏褉芯薪褨褔薪懈泄 锌邪薪泻褉械邪褌懈褌 褋锌芯褋褌械褉褨谐邪褞褌褜褋褟 锌芯褉褍褕械薪薪褟 屑褨薪械褉邪谢褨蟹邪褑褨褩 泻褨褋褌泻芯胁芯褩 褌泻邪薪懈薪懈.袩褉芯胁械写械薪褨 写芯褋谢褨写卸械薪薪褟 芯斜覒褉褍薪褌芯胁褍褞褌褜 写芯褑褨谢褜薪褨褋褌褜 褋锌褨谢褜薪芯谐芯 胁懈泻芯褉懈褋褌邪薪薪褟 泻邪谢褜褑褨褦胁屑褨褋薪芯谐芯 胁褨褌邪屑褨薪薪芯-屑褨薪械褉邪谢褜薪芯谐芯 锌褉械锌邪褉邪褌褍 褌邪 斜褨褋褎芯褋褎芯薪邪褌褍 褉懈蟹械薪写褉芯薪芯胁芯褩 泻懈褋谢芯褌懈 蟹邪 蟹邪锌褉芯锌芯薪芯胁邪薪芯褞 褋褏械屑芯褞 褍 谢褨泻褍胁邪薪薪褨 褋褍锌褍褌薪褜芯谐芯 芯褋褌械芯锌芯褉芯蟹褍 褍 褏胁芯褉懈褏 薪邪 褏褉芯薪褨褔薪懈泄 锌邪薪泻褉械邪褌懈褌. 袛芯胁械写械薪芯 写芯褑褨谢褜薪褨褋褌褜 胁懈泻芯褉懈褋褌邪薪薪褟 锌褉械锌邪褉邪褌褨胁 袙褨褌褉褍屑 袣邪谢褜褑褨褍屑 600+D400 褌邪 袪懈蟹械薪写褉芯褋 胁 泻芯屑锌谢械泻褋薪芯屑褍 谢褨泻褍胁邪薪薪褨 褏胁芯褉懈褏 薪邪 褏褉芯薪褨褔薪懈泄 锌邪薪泻褉械邪褌懈褌 褨蟹 褋褍锌褍褌薪褨屑 芯褋褌械芯写械褎褨褑懈褌芯屑, 褖芯 锌褉懈蟹胁械谢芯 写芯 褋褍褌褌褦胁芯谐芯 写芯褋褌芯胁褨褉薪芯谐芯 锌芯泻褉邪褖械薪薪褟 褋褌邪薪褍 屑褨薪械褉邪谢褨蟹邪褑褨褩 泻褨褋褌泻懈 - 锌褉懈褉芯褋褌褍 屑褨薪械褉邪谢褜薪芯褩 褖褨谢褜薪芯褋褌褨 泻褨褋褌泻芯胁芯褩 褌泻邪薪懈薪懈

    Electrochemical Determination of Sudan Dyes and Two Manner to Realise it a Theoretical Investigation

    Get PDF
    In this work, a general theoretical description of the electrochemical determination of Sudan dyes by cathodic and anodic route has been made. Two mathematical models have been developed for each case, being, afterward, analyzed by means of linear stability theory and bifurcation analysis. It has been shown that in both cases, the systems are efficient from the electroanalytical point of view. The possibility for the oscillatory and monotonic instability has also been verified

    Detector Technologies for CLIC

    Full text link
    The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D.Comment: 152 pages, 116 figures; published as CERN Yellow Report Monograph Vol. 1/2019; corresponding editors: Dominik Dannheim, Katja Kr\"uger, Aharon Levy, Andreas N\"urnberg, Eva Sickin

    Selection of the silicon sensor thickness for the Phase-2 upgrade of the CMS Outer Tracker

    Get PDF
    During the operation of the CMS experiment at the High-Luminosity LHC the silicon sensors of the Phase-2 Outer Tracker will be exposed to radiation levels that could potentially deteriorate their performance. Previous studies had determined that planar float zone silicon with n-doped strips on a p-doped substrate was preferred over p-doped strips on an n-doped substrate. The last step in evaluating the optimal design for the mass production of about 200 m2^{2} of silicon sensors was to compare sensors of baseline thickness (about 300 渭m) to thinned sensors (about 240 渭m), which promised several benefits at high radiation levels because of the higher electric fields at the same bias voltage. This study provides a direct comparison of these two thicknesses in terms of sensor characteristics as well as charge collection and hit efficiency for fluences up to 1.5 脳 1015^{15} neq_{eq}/cm2^{2}. The measurement results demonstrate that sensors with about 300 渭m thickness will ensure excellent tracking performance even at the highest considered fluence levels expected for the Phase-2 Outer Tracker

    Beam test performance of a prototype module with Short Strip ASICs for the CMS HL-LHC tracker upgrade

    Get PDF
    The Short Strip ASIC (SSA) is one of the four front-end chips designed for the upgrade of the CMS Outer Tracker for the High Luminosity LHC. Together with the Macro-Pixel ASIC (MPA) it will instrument modules containing a strip and a macro-pixel sensor stacked on top of each other. The SSA provides both full readout of the strip hit information when triggered, and, together with the MPA, correlated clusters called stubs from the two sensors for use by the CMS Level-1 (L1) trigger system. Results from the first prototype module consisting of a sensor and two SSA chips are presented. The prototype module has been characterized at the Fermilab Test Beam Facility using a 120 GeV proton beam

    Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation

    Get PDF
    The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5鈥7.5脳1034^{34} cm2^{-2}s1^{-1}. This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000鈥4000 fb-1 of proton-proton collisions at a center-of-mass energy of 13鈥14 TeV. To cope with these challenging environmental conditions, the strip tracker of the CMS experiment will be upgraded using modules with two closely-spaced silicon sensors to provide information to include tracking in the Level-1 trigger selection. This paper describes the performance, in a test beam experiment, of the first prototype module based on the final version of the CMS Binary Chip front-end ASIC before and after the module was irradiated with neutrons. Results demonstrate that the prototype module satisfies the requirements, providing efficient tracking information, after being irradiated with a total fluence comparable to the one expected through the lifetime of the experiment

    Comparative evaluation of analogue front-end designs for the CMS Inner Tracker at the High Luminosity LHC

    Get PDF
    The CMS Inner Tracker, made of silicon pixel modules, will be entirely replaced prior to the start of the High Luminosity LHC period. One of the crucial components of the new Inner Tracker system is the readout chip, being developed by the RD53 Collaboration, and in particular its analogue front-end, which receives the signal from the sensor and digitizes it. Three different analogue front-ends (Synchronous, Linear, and Differential) were designed and implemented in the RD53A demonstrator chip. A dedicated evaluation program was carried out to select the most suitable design to build a radiation tolerant pixel detector able to sustain high particle rates with high efficiency and a small fraction of spurious pixel hits. The test results showed that all three analogue front-ends presented strong points, but also limitations. The Differential front-end demonstrated very low noise, but the threshold tuning became problematic after irradiation. Moreover, a saturation in the preamplifier feedback loop affected the return of the signal to baseline and thus increased the dead time. The Synchronous front-end showed very good timing performance, but also higher noise. For the Linear front-end all of the parameters were within specification, although this design had the largest time walk. This limitation was addressed and mitigated in an improved design. The analysis of the advantages and disadvantages of the three front-ends in the context of the CMS Inner Tracker operation requirements led to the selection of the improved design Linear front-end for integration in the final CMS readout chip

    Search for top squarks in the four-body decay mode with single lepton final states in proton-proton collisions at s \sqrt{s} = 13 TeV